EXT60IR HDMI Extender
“
Specifications:
- Brand: Alfatron Electronics GmbH
- Model: ALF-EXT60IR
- Transmission Distance: Up to 70 meters
- Resolution Support: Up to 4K@30Hz
- Network Cable Support: CAT6/6A/7
- IR Function: Bi-directional pass-back (20-60KHz)
- Features: HDR10, EDID passthrough, Lightning Protection, Surge
Protection, ESD Protection - Power Supply: PoC network cable power supply (only TX power
supply needed) - Adapter: DC5V/2A
Product Usage Instructions:
Installation:
- Distinguish between the transmitter and receiver units.
- Avoid disassembling the product during operation to prevent
electric shock. - Cut off power before installation to prevent damage.
- Avoid exposure to rain, moisture, and liquid.
- Use a 5V/2A DC adapter; ensure compatibility with third-party
adapters.
Features:
- Zero latency transmission
- Supports up to 4K@30Hz resolution
- Supports CAT6/6A/7 network cables with varying transmission
distances - Bi-directional IR pass-back function (20-60KHz)
- Supports HDR10 and EDID passthrough
- Transmitter includes HDMI loop-out
- Provides Lightning Protection, Surge Protection, and ESD
Protection - Supports Power over Cable (PoC) for power supply
Installation Steps:
Transmitter Unit:
- Connect the source device to the HDMI in port of the
transmitter.
Receiver Unit:
FAQ:
1. How far can the HDMI signal be transmitted?
The HDMI signal can be transmitted up to 70 meters using
Cat6/6A/7 network cable.
2. Can I use a different DC adapter with this product?
It is recommended to use a 5V/2A DC adapter. If using a
third-party adapter, ensure it matches the specifications.
“`
www.alfatronelectronics.com Alfatron Electronics GmbH Germany
ALF-EXT60IR
· Important Safety Notice
1. Please distinguish the transmitter and receiver before installation. 2. Do not disassemble the machine to repair the product during the
working process to avoid electric shock. 3. Please cut off the power before installation. Live installation may
damage the equipment. 4. Do not expose the devices to rain, moisture and liquid. 5. Use a 5V/2A DC adapter only. Make sure the specification matched
if using 3rd party DC adapters.
· Introduction
This HDMI Extender includes a transmitter unit and a receiver unit, allows the HDMI signal to be transmitted up to 70 meters using a Cat6/6A/7 network cable. It adopts a point-to-point connection configuration, supports bi-directional IR pass-back. It is perfect for outdoor advertising, monitor system, home entertainment, conference, etc.
· Features
1. Zero latency. 2. Support up to 4K@30Hz resolution. 3. Support CAT6/6A/7 network cables, 1080p@60Hz transmission distance
is up to 70 meters, 4K30Hz transmission distance is up to 40 meters. 4. Support bi-directional IR pass-back function (2060KHz). 5. Support HDR10. 6. Support EDID passthrough. 7. Transmitter supports HDMI loop-out. 8. Lightning Protection, Surge Protection, ESD Protection. 9. Support PoC network cable power supply, only TX power supply is
needed.
1
· Package Contents
Transmitter unit x1pc
Receiver unit x1pc
DC5V/2A x1pc
User manual x1pc
2
2
Mounting brackets
Screws
· Installation Requirements
2
· Interfaces
Reset button
Press to restart the device
RJ45 signal output Output modulated HDMI signal.
IR in
Connect the IR receiver extension cable to ensure that the remote control used is within the range of the IR receiving device.
IR out
Connect the IR blaster extension cable, please keep the infrared transmitter as close as possible to the signal source device when using.
Power/Signal indicator
a. When power is on and no HDMI signal is transmitted, the indicator flashes.
b. When power is on and HDMI signal is transmitted, the indicator is always on.
DC 5V input HDMI output HDMI input
Connect to the 5V/2A DC power adapter. Connect to a local HDMI display device. Connect to a HDMI source device.
3
Reset button
Press to restart the device
RJ45 signal input Input modulated HDMI signal.
Connect the IR receiver extension cable to
ensure that the remote control used is within
the range of the IR receiving device.
IR out
Connect the IR blaster extension cable, please keep the infrared transmitter as close as possible to the signal source device when using.
Power/Signal indicator
a. When power is on and no HDMI signal is transmitted, the indicator flashes.
b. When power is on and HDMI signal is transmitted, the indicator is always on.
Connect to a HDMI display device.
4
· Installation Procedures
1. Connection
HDMI Display
V id e o S o u rc e IR IN
Network cable PoC
TX
Power
HDMI OUT
RX
HDMI Display
IR OUT
The network cable should follow the standard of IEEE-568B. It is recommended to select a network cable with less loss and crosstalk.
1-Orange/white 2-Orange
3-Green/white
4-Blue
5-Blue/white 6-Green
7-Brown/white 8-Brown
2. Connection instruction 1 ) Connect the source device to the HDMI in port of the transmitter with
an HDMI cable, and connect the HDMI out port of the receiver to the display device with another HDMI cable.
5
2 ) Connect the CAT out port of the transmitter and the CAT in port of the receiver via a network cable (CAT6/CAT6A/CAT7).
3 ) If using HDMI loop out, connect the display device to the HDMI OUT port of the transmitter.
4 ) Plug the power supply into the device to get started.
or or
6
· Specification
Items Voltage/Current Power consumption HDMI compliance HDCP compliance
HDMI resolution
Specification
DC5V/2A
TX<4W RX<4W
800×600, 1024×768, 1280×720, 1280×960, 1366×768, 1440×900, 1680×1050, 1920×1080, 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@24/25/30/50/60Hz, 3840×2160@24/25/30Hz
Supports audio formats
PCM, LPCM, DTS HD, DTS Audio
Input and output TMDS signal 0.7~1.2Vp-p(TMDS)
Input and output DDC signal Input cable length Output cable length
5Vp-p(TTL) 8m(AWG24) 8m(AWG24)
Transmission Distance
Cat6/6A/7
Electrostatic protection of the whole machine
1080p@60Hz transmission 70 meters 4K@30Hz transmission 40 meters
Implementation of the standard: IEC61000-4-2 1a Contact discharge Level 2 (±4KV) 1b Air discharge Level 3 (±8KV)
Working temperature Storage temperature
-20~60 -30~70
Humidity (no condensation) 090%RH
Dimension
75.0(L) x 80.0(W) x 18.0(H)mm
Material
Iron
Treatment process Color Weight
Grit blast Black
8
Documents / Resources
 |
ALFATRON EXT60IR HDMI Extender [pdf] User Manual EXT60IR HDMI Extender, EXT60IR, HDMI Extender, Extender |