Alecto SMART-PLUG20 Smart WiFi Adapter with Energy Meter
SMART-PLUG20
PUT DEVICE IN REGISTER MODE
ATTENTION
- Make sure that the SMART-PLUG20 is within range of the router during the registration process.
- Keep away from liquids and humidity.
SPECIFICATIONS
| Max. current: | 16A |
| Max. load: | 3680W |
| Standby power: | <0.5 W |
| Voltage: | 220-240VAC |
| Frequency: | 50/60 Hz |
| Operating temperature: | 5°C ~ 45°C |
| Storage temperature: | -10°C ~ 60°C |
| Wireless RF mode frequency band: | 2412-2472 MHz |
| Wireless communication protocol: | WIFI 802.11 b/g/n |
| Maximum transmitted power: | 16.7 dBm |
| Relative humidity: | <60% |
| Dimensions: | 84x50x50 mm |
DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type Alecto SMARTPLUG20 is in compliance with directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address: http://DOC.hesdo.com/SMART-PLUG20-DOC.pdf
Commaxx B.V.
Wiebachstraat 37
6466NG Kerkrade
The Netherlands
Documents / Resources
 |
Alecto SMART-PLUG20 Smart WiFi Adapter with Energy Meter [pdf] User Manual SMART-PLUG20, Smart WiFi Adapter with Energy Meter, SMART-PLUG20 Smart WiFi Adapter with Energy Meter |
 |
Alecto SMART-PLUG20 Smart WiFi Adapter with Energy Meter [pdf] Instruction Manual SMART-PLUG20, Smart WiFi Adapter with Energy Meter, SMART-PLUG20 Smart WiFi Adapter with Energy Meter |
