Alecto logoDVM-201 Registering Camera
User ManualAlecto DVM 201 Registering Camera

REGISTERING CAMERA:

Alecto DVM 201 Registering Camera - REGISTERING CAMERA

  1. First remove the camera from its packaging, then connect the supplied power adaptor, insert it into a wall socket and turn on the camera.
  2. Now take the parent unit to pair the new camera
  3. Alecto DVM 201 Registering Camera - icon 1 open the setup menu
  4. Alecto DVM 201 Registering Camera - icon 2 select the option ‘Pair/Unpair CAM’
  5. Alecto DVM 201 Registering Camera - icon 1 open this item
  6. Alecto DVM 201 Registering Camera - icon 2 select ‘Pair CAM’
  7. Alecto DVM 201 Registering Camera - icon 1 confirm your choice
  8. Alecto DVM 201 Registering Camera - icon 2 select an available camera number
  9. Alecto DVM 201 Registering Camera - icon 1 confirm the instruction
  10. Keep this button (see the drawing below) depressed for several seconds until the power indicator on the additional camera starts flashing rapidly.
  11. After several seconds the image of the new camera will appear in the display of the parent unit.

The additional camera is now registered and is ready for use.

INFORMATION POWER ADAPTER:

Manufacturers name and address: Vtech Telecommunications LTD, 23/F., Tai Ping Industrical Centre, Block 1, 57 Ting Kok Road, Tai Po, Hong Kong.
Model Identifier: VT05EEU05100
Input voltage: 100-240VAC
Input AC frequency: 50/60 Hz
Output voltage: 5.0V DC
Output current: 1.0 A
Output Power: 5.0 W
Average active efficiency: 74.0 %
Efficiency at low 10% load: No load Power consumption: 0.07 W

SPECIFICATIONS:

Range:up to 50 meters indoors
up to 300 meters outdoors
Parent unit power:3.7V Lithium Polymer battery model BL198555/BT298555
5VDC 1000mA power adapter (incl.), model VT05EEU05100
Baby unit power:6VDC 1000mA power adapter (incl.),
model: VT05EEU06100
Frequency:2400-2483,5 MHz
Modulation: FSK
RF power:<20 dBm
Display:4.3” TFT LCD display WQVGA 480×272 pixel
Recharging time parent unit battery:~ 6 hours*
Life-span parent unit battery:6~7 hours*
Temperature sensor range:10°C – 35°C
Accuracy:± 2°C (at 25°C)
Storage temperature:0°C – 50°C

DECLARATION OF CONFORMITY
Hereby, Commaxx declares that the radio equipment type Alecto DVM-200 is in compliance with directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://DOC.hesdo.com/DVM-200-DOC.pdf. Use of this equipment is allowed in all countries of the EU. In France, Italy, Russia and Ukraine, only indoor use is allowed.

Tenda E12 AC1200 Wireless PCI Express Adapter - CE

Alecto DVM 201 Registering Camera - icon 3Alecto DVM 201 Registering Camera - icon 4 WWW.ALECTO.NL
SERVICE@ALECTO.NL
Alecto DVM 201 Registering Camera - icon 5 Commaxx B.V., Wiebachstraat 37, 6466 NG Kerkrade, The Netherlands

Alecto logo

Documents / Resources

Alecto DVM-201 Registering Camera [pdf] User Manual
DVM-201 Registering Camera, DVM-201, Camera, DVM-201 Camera, Registering Camera

References

Leave a comment

Your email address will not be published. Required fields are marked *