Akko MU02 ISO Tri Mode Mechanical Keyboard
Thank you for supporting Akko
To provide you with a better user experience, please read this manual carefully before using the product.
Packing List
System Requirement
Windows®XP I Vista / 7 / 8 / 10 or higher version
Connectivity Method
Connect the keyboard to your computer by plugging in the USB cable into an available USB port to start using it.
LED Indicators
MU02 ISO Hotkeys
MU02 ISO System Commands (Windows)
- Lock Window Key
Press Fn and left Win key. - Restore Factory Setting
Hold down Fn and press • Key for 5s. - Revert Ctrl into Menu Key
Hold down Fn and press right Ctrl for 3s.
MU02 ISO System Commands(Mac)
MU02 ISO Backlight Settings
MU02 ISO Wireless/Wired Connection Guide 
Bluetooth Pairing
After turning on the keyboard, press Fn + E/R/T to enter Bluetooth mode. Press and hold the Fn+E/R/T combination keys for 3 seconds to put the keyboard in pairing mode, with the blue indicator light flashing quickly. Once the connection is established, the indicator light will stay on for 2 seconds. If the device fails to connect, the indicator light will turn off and the keyboard will enter sleep mode.
2.4G Pairing
After turning on the keyboard, press Fn + Y to enter 2.4G mode. Then press and hold the Fn +Y combination key for 3 seconds to enter pairing mode. Then insert the receiver, and the green indicator light will flash quickly. Once the pairing is successful, the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indicator will turn off and the keyboard will enter sleep mode.
Battery Level Check
In wireless mode, please press Fn+Spacebar combinaton keys to check the battery level. If the battery level is less than 30%, the 1-2 keys will light up red. If the battery level is less than 100%, the 1-9 keys will light up green, and if the battery level is full, the 1-0 keys will light up green .
Note the LED Indicator os located under the spacebar. To check the battery level, please make sure
- the keyboard is in wireless mode <D the RGB mode is turned on.
Key/Lighting Effects Customization Instruction
Option 1:
A deeper level of customization for the keyboard keys and lighting requires the use of the web-based driver. Akko official web-based driver address: https:/lakko.hsgaming.cn
Option 2:
VIA is a widely recognized software that offers an intuitive interface for configuring and personalizing various keyboard settings. Users can utilize VIA to remap keys and adjust lighting on keyboards.
Web Version: https://usevia.app/
App: https://github.com/the-via/releases/releases
It enables you to remap keys, create custom macros, customize lighting effects, and more. If you encounter connection issues, please load the corresponding JSON file specific to your keyboard model. You can download JSON files from our dedicated Download page:
https://akkogear.eu/pages/download-center
AKKO Warranty and Service Statement
- Akko provides One-Year warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for specific warranty policy.
- If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard by themselves. However, users shall take full responsibility for any loss happened during self-repair.
- Defects resulting from disassembly of our product, improper usage and incorrect installation are not covered by warranty.
- The return and warranty policy may vary in different platforms and are subject to the specific distributorat the time of purchase.
Company: Shenzhen Yinchen Technology Co., Ltd
Address: 33 Langbi Rd, Bitou Community 1st Industrial Zone, Bao’an District, Shenzhen, China Tel: 0755-23216420
Website: www.akkogear.eu
Origin: Shenzhen, China.
Documents / Resources
 |
Akko MU02 ISO Tri Mode Mechanical Keyboard [pdf] User Manual MU02 ISO, MU02 ISO Tri Mode Mechanical Keyboard, Tri Mode Mechanical Keyboard, Mechanical Keyboard, Keyboard |
