AKKO 5108 B-PLUS Wireless Full Size Keyboard User Manual

2.4G Wireless Indicator: Green light blinks slowly when pairing, blinks fast when connected, and stays on for 2 seconds when fully connected.
Battery Status Indicator: White light blinks slowly for low battery, steady white when charging, and off when fully charged.

Caps Lock Indicator: Steady white light.

HotKeys

Windows HotKeys: Various functions, including File Explorer, Email, Search, Browser, and Media control, are available using specific key combinations.
System Commands (Windows and Mac): Includes commands to lock the Windows key, restore factory settings, and revert the Ctrl key to the Menu key.

Backlight Settings: Adjust volume, brightness, animation speed, and direction using specific key combinations.

Reverting System Settings

To revert system settings or restore factory settings, follow the specific key combinations mentioned in the user manual.

Thank you for supporting Akko
To provide you with a better user experience, please read this manual carefully before using the product.

Packing List

System Requirement
Windows®XP / Vista / 7 / 8 / 10 or higher version

Connectivity Method
Connect the keyboard to your computer by plugging in the USB cable into an available USB port to start using it.

LED Indicators

5108B Plus HotKeys

5108B Plus System Commands (Windows)

5108B Plus System Commands (Mac)

5108B Plus Backlight Settings

5108B Plus Connection Usage Guide

Bluetooth Pairing

After turning on the keyboard, press Fn+E/R/T to enter Bluetooth mode. Press and hold the Fn+E/R/T combination key for 3 seconds to put the keyboard in pairing mode, with the blue indicator light flashing quickly.
After successful pairing, the keyboard will enter a low-power sleep mode after being idle for 2 minutes. The keyboard will enter the hibernate state 15 minutes after entering the low-power sleep mode.

Pairing

After turning on the keyboard, press Fn+Y to enter 2.4G mode. Then press and hold the Fn+Y combination key for 3 seconds to enter pairing mode. Then insert the receiver, and the indicator light will flash quickly. After successful pairing, the keyboard will enter a low-power sleep mode after being idle for 2 minutes.
The keyboard will enter the hibernate state 15 minutes after entering the low-power sleep mode.

Battery Level Check

Press the Fn + Space combination keys to check the battery level. If the battery level is below 30%, the space key will show a red light. If it’s between 30-50%, the space key will show an orange light. If it’s between 50-70%, the space key will show a purple light. If it’s between 70-90%, the space key will show a yellow light. If it’s 90-100%, the space key will show a green light.

Key/Lighting Effects Customization Instruction

The driver can be connected, and the lighting and key can be customized under the three working modes of the keyboard.
The three working modes of the keyboard can be matched to drive the music rhythm.m
Please download the Akko Cloud driver from our website
Users can download the driver via en.akkogear.com

AKKO Warranty and Service Statement

Akko provides a One-Year warranty for customers in mainland China. For other regions, please contact your seller (Akko distributor) for the specific warranty policy.
If the warranty window expires, customers need to pay for repairs. Akko will also provide instructions if users prefer to repair the keyboard by themselves.
However, users shall take full responsibility for any loss that occurs during self-repair.
Disassembling the keyboard without the manufacturer/seller’s instructions will immediately void the warranty.

The return and warranty policy may vary on different platforms and are subject to the specific distributor at the time of purchase.

Company: Shenzhen Yinchen Technology Co., Ltd

Address: 33 Langbi Rd, Bitou Community 1st Industrial Zone, Bao’an District, Shenzhen, China Tel: 0755-23216420

Website: www.akkogear.com
Origin: Shenzhen, China

Precautions

Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive forces, etc.

www.akkogear.com

Frequently Asked Questions

How do I pair a Bluetooth device?
To pair a Bluetooth device, ensure the keyboard is in pairing mode and follow the device’s instructions for Bluetooth pairing. The indicator light will blink slowly during the pairing process.

How do I adjust the backlight settings?
To adjust the backlight settings, use the specific key combinations mentioned in the user manual to control brightness, animation speed, and direction.

What are the system commands for Windows and Mac?
The system commands include functions like locking the Windows key, restoring factory settings, and changing key functionalities. Refer to the manual for detailed key combinations.

Documents / Resources

AKKO 5108 B-PLUS Wireless Full Size Keyboard [pdf] User Manual
5108 B-PLUS, 5108 B-PLUS Wireless Full Size Keyboard, Wireless Full Size Keyboard, Full Size Keyboard, Keyboard

References

User Manual

AKKO 5108 B-PLUS Wireless Full-Size Keyboard