AKKO 5098B Three Mode Keyboard
Products
What’s in the package
Windows®XP / Vista / 7 / 8 / 10 or higher version
Connectivity Method
Connect the keyboard to your computer by plugging in the USB cable into anavailableUSB-A port to start using it.
LED Indicator Overview
Function Keys
Power Switch
5098B LCD Screen Features
Encoder Wheel
- Scroll Up: Volume
- Scroll Down: Volume-
- Press: Play/Pause
- Fn + Press: Switch to screen control mode
- Scroll Up/Down: Switch between screen functions
- Press: Confirm the selection and return to the previous level
| Volume Control | Volume up, Volume down |
|
Lighting Effects |
Effectl, Effect2, Effect3, Effect4, Effects, Effect6, Effect?, Effects, Effect9, EffectlO, Effectll, Effect12, Effect13, Effect14, Effect15,Effect16, Effect17, Effect18, Effect19, Effect20 |
| Light Color | Rainbow, Red, Green, Blue, Orange, Purple, Yellow, Custom (White) |
| Light brightness | 0 – 25% – 50% – 75% – 100% |
| light Speed | 0 – 25% – 50% – 75% – 100% |
| Side light effect | Neon, Wave, Marquee, Steady, Breathing, Off |
| Language Selection | CN, DE. EN, RU, VN |
| Connection | Bluetooth device 1, Bluetooth device 2, Bluetooth device 3 2.4G wireless device, Wired mode, Return |
System Commands (Windows)
System Commands (Mac)
Backlight Settings
Key/Lighting Effects Customization instruction
- The keys can be remapped and RGB can be programmed in the driver in any of the connection mode.
- Keyboard lighting can be coordinated with the driver to achieve audio visualizer
- Please download the Akko Cloud driver on our website
- Users can download the driver via www.akkogear.eu
Wireless/Wired Connection Guide
Bluetooth Pairing
After the keyboard is turned on, press Fn+E/R/T to enter Bluetooth mode. Press and hold the Fn+E/R/T key combination for 3 seconds, and the keyboard will enter the pairing state. The blue indicator light will flash quickly, and the indicator light will stay on for 2 seconds after connecting. If the device is not connected, the indicator light will go out and the keyboard will enter sleep mode.
2.4G Pairing
After turning on the keyboard, press FN+Y to enter 2.4G mode. Then press and hold the FN+Y Key combination for 3 seconds to enter pairing mode. Then insert in thereceiver, and the indicator light will flash quickly. Once the pairing is successful,the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indicator will turn off and the keyboard will enter sleep mode.
Battery Level Check
In wireless mode, press the Fn+Space key combination to check the battery power. Whenthe battery is below 30%, the space key will light up red; 30-50% will light up orange, 50-70% will light up purple, 70-90% will light up yellow, 90-100% will light up green.
Akko Warranty and Service Statement
- Ako provides a One-Year warranty for customers in mainland China, For other regions, please contact your seller (Akko distributor) for a specific warranty policy.
- If the warranty window expires, customers need to pay for repairs, Akkowill also provides instructions if users prefer to repair the keyboard by themselves, However, users shall take full responsibility for any loss happened during self-repair.
- Defects resulting from disassembly of our product, improper usage and incorrect installation are not covered by warranty.
- The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.
Company: Shenzhen Yinchen Technology Co., Ltd
Address: 33 Langbi Rd, Bitou First Industrial Zone, Bao’an District, Shenzhen, China
Tel: 0755-23216420
Website: www.akkogear.eu
Origin: Shenzhen, China
Precautions
Man-made damage is not limited to immersion, falling off, and pulling off the wires with excessive forces, etc.
Documents / Resources
 |
AKKO 5098B Three Mode Keyboard [pdf] User Manual 5098B Three Mode Keyboard, 5098B, Three Mode Keyboard, Mode Keyboard, Keyboard |