Akko 5098B Mechanical Keyboard Instruction Manual
Thank you for supporting Akko
Packing List
What’s in the package
Minimum System Requirement
Windows®XPIVista / 7/ 8 110 or higher version
Connectivity Method
Connect the keyboard to your computer by plugging in the USB cable into an available USB-A port to start using it.
LED Indicator Overview
| Status | Indicator | Re-Connecting | Pairing | Connected |
| Bluetooth device 1 | LED for key E | Blue light blinks slowly | Blue light blinks fast | On for 2s and then off |
| Bluetooth device 1 | LED for key R | Blue light blinks slowly | Blue light blinks fast | On for 2s and then off |
| Bluetooth device 1 | LED for key T | Blue light blinks slowly | Blue light blinks fast | On for 2s and then off |
| 2.4G wireless device | LED for key Y | Green light blinks slowly | Green light blinks fast | On for 2s and then off |
| Wired mode | LED for key U | N/A | N/A | Red light On for 2s and then off |
| Status | Indicator | Indicating Mode | ||
| Low Battery | The third indicator light | Red Light Blinks Slowly | ||
| Charging | The third indicator light | Steady Red | ||
| Fully Charged | The third indicator light | LED OFF | ||
| Caps | The first indicator light | Steady White | ||
| Num | The second indicator light | Blue light is always on | ||
| Lock Win | Win key indicator | Steady White | ||
Hot Keys
| Fn+ | W | = | Swap WASD with↑↓←→ |
| F1 | My Computer | ||
| F2 | |||
| F3 | Windows Search | ||
| F4 | Browser Homepage | ||
| F5 | Multimedia Player | ||
| F6 | Play/Pause | ||
| F7 | Previous Song | ||
| F8 | Next Song |
System Commands (Windows)
| Fn+ | ~ | = | Press and hold for 3 seconds to restore to factory settings |
| L_Win | Lock Windows Key |
LCD Screen Features
Encoder Wheel
- Scroll Up: Volume +
- Scroll Down: Volume –
- Press: Play/Pause
- Fn + Press: Switch to screen control mode
- Scroll Up/Down: Switch between screen functions
- Press: Confirm selection and return to the previous level
Volume Control Volume up, Volume down Lighting Effects Effect 1, Effect 2, Effect 3, Effect4, Effect5, Effect 6, Effect 7, Effect 8, Effect 9, Effect 10, Effect 11, Effect 12, Effect 13, Effect 14, Effect 15, Effect 16, Effect 17, Effect 18, Effect 19, Effect 20 Light Color Rainbow, Red, Green, Blue, Orange, Purple, Yellow, Custom (White) Light brightness 025%-50%-75%-100 Light Speed 025%-50%-75% 100% Side light effect Neon, Wave, Marquee, Steady, Breathing, Off Language Selection Connection Bluetooth device 1, Bluetooth device 2, Bluetooth device 3, 2.4G wireless device, Wired mode, Return
Power Switch
System Commands (Mac)
| Fn+ | F1 | = | Decrease display brightness |
| F2 | Increase display brightness | ||
| F3 | Open mission control | ||
| F4 | Activate Siri | ||
| F7 | Skip back (Audio) | ||
| F8 | Pause/Play (Audio) | ||
| F9 | Skip forward (Audio) | ||
| F10 | Mute | ||
| F11 | Volume down | ||
| F12 | Volume up |
| L_Win | = | L_Option |
| L_Alt | L_Command | |
| R_Alt | R_Command |
Back light Settings
| Fn+ | Del | = | Effect1、Effect2、Effect3、Effect4、Effect5、Effect6、Effect7、Effect8、 Effect9、 Effect10 Effect11、Effect12、Effect13、Effect14 Effect15、 Effect16、Effect17、Effect18、Effect19, Effect20 |
| ↑ | Bright | ||
| ↓ | Dim | ||
| ← | Set animation direction to left | ||
| ← | Set animation direction to right | ||
| – | Slower Animation | ||
| = | Faster Animation | ||
| / | This shortcut allows you to set the backlight color to 7 single color with RGB loop effect | ||
| Z | Adjust side LED brightness (5 levels) | ||
| X | Adjust side LED animation speed (5 levels) | ||
| L | Light Off/On | ||
| Left Ctrl | Adjust side LED mode, including Lights OFF (6 levels) | ||
| Left Alt | Side LED mode: This shortcut allows you to set the light to 7 single colors with an RGB loop effect |
Wireless/Wired Connection Guide
| Fn+ | E | = | Bluetooth Device 1 | Short press to reconnect Long press to pair |
| R | Bluetooth Device 2 | |||
| T | Bluetooth Device 3 | |||
| Y | 2.4G Wireless Device | |||
| U | Wired Mode |
Bluetooth Pairing
After the keyboard is turned on, press Fn+E/RIT to enter Bluetooth mode. Press and hold the F+E/R/T key combination for 3 seconds, and the keyboard will enter the pairing state. The blue indicator light will flash quickly, and the indicator light will stay on for 2 seconds after connecting, f the device is not connected, the indicator light will go out and the keyboard will enter sleep mode.
2.4G Pairing
After turning on the keyboard, press FN+Y to enter 2.4G mode.Then press and hold the FN+Y Key combination for 3 seconds to enter pairing mode.Then insert in the receiver, and the indicator light will flash quickly. Once the pairing is successful the LED indicator will stay on for 2 seconds. If no available device is found within 30 seconds, the LED indicator will turn off and the keyboard will enter sleep mode.
Battery Level Check
In wireless mode, press Fi+Space key combination to check battery power. When the battery s below 30%, the space key will light up red; 30-50% will light up orange, 50-70% will light up purple, 70-90% will light p yellow, 90-100% will light up green.
Key/Lighting Effects Customisation instruction
- The keys can be remapped and RGB can be programmed in the driver in any of the connection mode
- Keyboard lighting can be coordinated with the driver to achieve audio visualizer
- Please download the Akko Cloud driver on our website
- Users can download the driver via en.akkogear.com
Akko Warranty and Service Statement
- Akko provides One-Year warranty for customers in mainland China, For other regions, please contact your seller (Akko distributor) for specific warranty policy.
- If the warranty window expires, customers need to pay for repairs, Akko will also provide instructions if users prefer to repair the keyboard by themselves, However, users shall take full responsibility for any loss happened during self-repair
- Defects resulting from disassembly of our product, improper usage and incorrect installation are not covered by warranty.
- The return and warranty policy may vary in different platforms and are subject to the specific distributor at the time of purchase.
Company: Shenzhen Yinchen Technology Co., Ltd
Address: 33 Langbi Rd, Bitou Community st industrial Zone, Baofan District, Shenzhen, China
Tel: 075523216420
Website: www.akkogear.com
Origin: Shenzhen, China
WARNING:
Water and Beverages can’t be poured into the Keyboard.
Made in China
Precautions
Man-made damage is not limited to immersion, falling off, and puling off the wires with excessive forces, etc. www.akkogear.com
@akkogear
Akko
Documents / Resources
 |
Akko 5098B Mechanical Keyboard [pdf] Instruction Manual 5098, 5098B, 5098B Mechanical Keyboard, 5098B, Mechanical Keyboard, Keyboard |
 |
Akko 5098B Mechanical Keyboard [pdf] User Manual 5098B Mechanical Keyboard, 5098B, Mechanical Keyboard, Keyboard |
