AJAZZ NACODEX QS87 RGB Triple Mode Mechanical Keyboard User Manual

QS87 RGB Triple Mode Mechanical Keyboard

Product Information

Specifications:

  • Product Name: QS87 RGB Triple Mode Mechanical Keyboard
  • Brand: AJAZZ
  • Transmission Method: USB Cable + Wireless 2.4G + BT5.3

Product Usage Instructions:

1. Connecting the Keyboard:

To use the keyboard, connect it to your device using one of the
available methods: USB cable, Wireless 2.4G dongle, or Bluetooth
5.3.

2. Mode Selection:

This keyboard features three modes – USB mode, Wireless 2.4G
mode, and Bluetooth 5.3 mode. Use the mode switch key to toggle
between the different modes based on your preference.

3. RGB Lighting Control:

Customize the RGB lighting effects by using the dedicated keys
on the keyboard. Press the RGB key along with other function keys
to adjust brightness, colors, and lighting patterns.

4. Maintenance:

Keep your keyboard clean by using a soft, dry cloth to remove
dust and debris. Avoid using harsh chemicals or liquids that may
damage the keyboard.

FAQs (Frequently Asked Questions):

Q: How do I switch between the different modes?

A: To switch modes, use the mode switch key located on the
keyboard. Press the key to cycle through USB mode, Wireless 2.4G
mode, and Bluetooth 5.3 mode.

Q: Can I customize the RGB lighting effects?

A: Yes, you can customize the RGB lighting effects by using the
RGB key in combination with other function keys. Experiment with
different combinations to find the lighting effect that suits your
style.

Q: How do I clean the keyboard?

A: To clean the keyboard, gently wipe it with a soft, dry cloth
to remove any dirt or dust. Avoid using water or cleaning solutions
as they may damage the keyboard.

QS87 RGB TRIPE MODE MECHANICAL KEYBOARD
Warning Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

Merek Produk:AJAZZ Tipe Produk: QS87 Metode Transmisi:Kabel USB+Nirkabel 2.4G+BT5.3 Tipe Antar

Documents / Resources

AJAZZ NACODEX QS87 RGB Triple Mode Mechanical Keyboard [pdf] User Manual
QS87, QS87 RGB Triple Mode Mechanical Keyboard, RGB Triple Mode Mechanical Keyboard, Triple Mode Mechanical Keyboard, Mechanical Keyboard, Keyboard

References

Leave a comment

Your email address will not be published. Required fields are marked *