AJAZZ NACODEX AJ139 PRO Dual Mode Mouse

Product Specification

• Product brand: AJAZZ
• Product model: AJ139 PRO
• Transmission method: USB wired + 2.4G wireless
• Interface type: Type-C interface
• Product size: 125.4×63.3×38.2mm
• Product weight: ~ 59g
• Shell material: ABS injection molding
• Number of buttons: 6 buttons + 1 switch
• Wire length: 1.5M
• DPI adjustment: 400-3200 (six-speed DP| driver adjustable)
  (The driver software can adjust the minimum DPI to 50 and the maximum DPI to 26000. The driver DPI can be adjusted in steps of 50 DPI.)
• Sensor: PAW3395
• Button life: 10000W times
• Battery capacity: 300mAh
• Return rate: Wired USB: 1000Hz / 2.4G: 1000Hz
• Driver software adjustable rate of return:
  • D.Wired rate of return: 125Hz/250Hz/500Hz/1000Hz
  • 2.2.4G rate of return: 125Hz/250Hz/500Hz/1000Hz
• Supported systems: Windows Vista/XP/7/8/10/11, Mac

Product Usage Instructions

1. Setting Up:
   Place the product on a flat, stable surface near a power outlet. Connect the AC adapter to the power port on the product and plug it into the outlet.
2. Powering On:
   Press the power button located on the front panel of the product. The LED indicator will light up, indicating that the product is powered on.
3. Adjusting Settings:
   Use the control panel to adjust settings such as temperature, speed, or intensity based on your preference. Refer to the user manual for specific instructions on setting adjustments.
4. Operating:
   Once the settings are adjusted, press the start button to begin the operation. Monitor the product during use and make any necessary adjustments as needed.
5. Cleaning and Maintenance:
   After each use, ensure the product is unplugged before cleaning. Use a damp cloth to wipe down the surfaces. Regular maintenance will prolong the product’s lifespan.

Thank you very much for purchasing our AJAZZ AJ179PRO dual-mode gaming mouse. We hope it will bring you a new operating experience. To get more enhanced settings and functions, you can download the driver software from the official website.

Function description

1. Left click
2. Right click
3. Middle button (wheel button)
4. Forward key
5. Back key
6. DPI/PR switch key
   1. DPI switch key
      1. Six-level DPI key:
         • Default DPI: 800 (green). (The DPI value can be customized and adjusted in the driver software)
         • DPI indicator: 400 (red) / 800 (green) / 1200 (blue) / 1600 (cyan) / 2400 (yellow) / 3200 (purple)
      2. DPI lighting effect: Switch DPI. The DPI indicator light flashes 3 times corresponding to the color
7. Power switch
   1. ON position: turn it up to the ON position, the power is turned on;
   2. OFF position: turn it down to the OFF position, and the power is turned off.

(Note: In any mode, inserting the USB data cable is the wired mode and the mouse is charged

Indicator light/low power mode description

Mouse front indicator light

1. D. DPI indicator: Corresponding to the color of the DPI gear
2. Low power indicator: The indicator flashes (red light)
3. Charging indicator: The indicator is always on (red light)
   1. Pairing indicator: 2.4G mode pairing indicator (green light)
      1. Pairing indicator flashes slowly (green light): enter 2.4G reconnection state
      2. Pairing indicator flashes quickly (green light): enter 2.4G pairing state

Note: reconnection time 10s, pairing time 30s, timeout enters deep sleep

Low Power Mode

1. Low battery status: The mouse indicator light flashes (red light);
2. Charging status: The mouse indicator light is always on (red light);
3. Fully charged status: The mouse indicator light returns to normal lighting effect;
4. Battery voltage is below 3.4V: The mouse indicator light flashes at a frequency of 0.5hz (red light), prompting charging;
5. Battery voltage is below 3.2V-3.OV: The mouse automatically shuts down.

Sleep Mode

1. Power-saving sleep: After the mouse stops moving for 10 seconds, it enters power-saving sleep mode, and moving/pressing a button can wake up the mouse;
2. Deep sleep: After the mouse stops moving for 5 minutes, it enters deep sleep mode, and can only be woken up by pressing a button.

(Note: The deep sleep time can be customized in the driver software.)

4. Mode connection instructions

1. Wired mode: Wired mode switching method: No matter in any mode, after plugging in the TYPE-C cable, it will automatically switch to wired mode and start charging the mouse.
2. 2.4G wireless mode:
   1. 4G switching method: Flip the power switch at the bottom of the mouse upwards to switch to 2.4G mode.
   2. 4G pairing method: In 2.4G mode, press and hold (left button + middle wheel button + right button) at the same time for 5 seconds. Mouse flashes quickly (green light), you will enter pairing mode, and then plug in the 2.4G receiver.  If the pairing is successful, the mouse goes out.

(The 2.4G receiver is paired by default at the factory)

FCC STATEMENT

Warning Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit diferent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/IV technician for help.

FAQ

Q: Can the product be used without the AC adapter?
A: No, the product requires the AC adapter for power.

Q: How often should I clean the product?
A: It is recommended to clean the product after each use to maintain hygiene and performance.

Documents / Resources

AJAZZ NACODEX AJ139 PRO Dual Mode Mouse [pdf] User Manual AJ139 PRO, AJ139 PRO Dual Mode Mouse, Dual Mode Mouse, Mouse

References

• User Manual