HomeSiren
38287.11.WH1 Hub 2 Wireless Control Panel
Wireless indoor siren that loudly notifies of an alarm during detector activation. It is installed indoors to warn of danger or deter intruders.
- Authentication to prevent forgery
- Jamming detection and communication channels encryption
- Tampering alarm
| Indicates armed/disarmed stateby means of a built-in LED | An external LED is connected to the siren, if necessary | Customizable sound level and alarm length during detector activation |
Principle of operation
The device notifies of detector activation with an audible alarm. Sound level and alarm length are set in the mobile application.
Features
Connector for external LED is available. It can be mounted outside your apartment or office to monitor the security system status.
Installation and set up
Ready to operate straight out the box: the battery is already installed, therefore there is no need to disassemble the siren. With one click, it can be connected to the hub in the mobile application. It can be mounted on the SmartBracket in just a few minutes.
Documents / Resources
 |
AJAX 38287.11.WH1 Hub 2 Wireless Control Panel [pdf] Instructions 38287.11.WH1, 38288.11.BL1, 38287.11.WH1 Hub 2 Wireless Control Panel, 38287.11.WH1, Hub 2 Wireless Control Panel, Wireless Control Panel, Control Panel |