Monster Keyboard and Mouse Adapter
“
Specifications:
- Product Name: AIMZENIX-MONSTER Keyboard and Mouse Adapter
- Platform Compatibility: PS5, PS4, PS3, Xbox One, Xbox Series
X/S, Xbox 360, Nintendo Switch - Connection Interface: Type-C, USB 1, USB 2, Ethernet Port,
3.5mm Audio Port
Product Usage Instructions:
1. Firmware Update and App Installation:
Before using the AIMZENIX-MONSTER adapter, ensure to download
the latest version of the GEEKVICE app and update the firmware of
the device to the latest version. This is crucial for optimal
functionality. Firmware and app updates can be done through the
GEEKVICE app.
2. Connecting MONSTER to PS5:
Connection Steps:
- Plug the MONSTER adapter into your PS5 console using the
provided Type-C data cable. The indicator light should flash
white. - Connect an Ethernet cable from your router to the Ethernet port
of the MONSTER adapter. - Connect your keyboard and mouse to the respective interfaces on
the MONSTER adapter. - If you are using high-power peripherals, consider connecting an
additional power supply to the MONSTER adapter.
3. PS5 Remote Play Binding:
Binding Steps:
- Switch the MONSTER adapter to PS5 mode using the GEEKVICE
app. - Open Remote Play settings on your PS5 console: Settings ->
System -> Remote Play -> Enable Remote Play. - Generate an eight-digit pairing code and enter it in the
GEEKVICE app to complete the pairing process.
4. Connecting MONSTER to PS4/PS3:
Connection Steps:
- Connect the MONSTER adapter to your PS4/PS3 console using the
provided Type-C data cable. - If needed, connect an additional power supply for high-power
peripherals.
FAQ:
Q: What do the indicator lights on the MONSTER adapter
signify?
A: The indicator lights on the MONSTER adapter
indicate different connection statuses:
- Solid Green Light: Successful connection to PC, Xbox (One, X/S,
360) - Solid Red Light: Successful connection to Nintendo Switch
- Solid Purple Light: Successful connection to PS4
- Flashing White Light: Failed connection to PC, Xbox, Nintendo
Switch - Flashing Purple Light: Failed connection to PS5
“`
Product Details
EQUIPMENT LAYOUT
TYPE-C 1
Game Console
Ethernet Port
TYPE-C 2
Connect router when Playing PS5 Extra Power
3.5mm Audio Port
AIMZENIX-MONSTER
Keyboard and Mouse Adapter USB 1 Keyboard/Mouse
USB3
Original Controller
Power Button
& Indicator
USB 2
Keyboard/Mouse
AIMZENIX-MONSTER
Keyboard and Mouse Adapter
platform compatibility
WHAT’S IN TEH BOX
F PlayStation A F PlayStation B
F PlayStation ·
F Xbox On2 F Xbox Series X/C F Xbox 36. F Nintendo Switch
F M S ON TER Console Adapter * F Micro-USB data cable *
F Type-C Data Cable *t
F CAT5e Network Cable * F G OT Adapter *
F Quick Start Guide *1
User Manual
MONSTER indicator color code
F Solid Green Light = Successful Connection to PC, XBOX (One, X/S, 360i F Solid Red Light = Successful Connection to Nintendo Switcy
F Solid Blue Light = Successful Connection to PS4, PS·
F Solid Purple Light = Successful Connection to PSA F Flashing White Light = Failed Connection to PC, XBOX(One, X/S, 360), Nintendo Switch,
PS4, PS·
F Flashing Purple Light = Failed Connection to PS5
Usage Guidelines
F Please download the latest version of the GEEKVICE app and update the firmware of M S ON TER to the latest version. A version mismatch may impede functionality
F Firmware and APP version updates can be completed through the app.
User Manual
CONNECT MONSTER to PS5 (1)
Connection diagram
2 Router (same as PS5 console LAN)
*TYPE-C 1
1 PS5 Console
*USB 1
TYPE-C 2 Extra Power
Solid Purple Light
= Successful Connection *USB 2
MORE USER GUIDE
APP Download
Compatible K&M List
CONNECT MONSTER to PS5 (2)
3 Switch to P5 mode and Click “Bind” on the card. select PS login for the first login, which
will redirect you to Sony’s official login page. Enter the account and password used on the
PS5 console, and after signing in, you will be redirected to a blank page. Click “Submit”.
3 Keyboard/Mouse
3 Keyboard/Mouse
settings on the ps5
Go to “Settings > Accessories > Controller > Communication Method > Use USB Cable”
MONSTER Connection Steps
1 Plug M S ON TER into your PS5 console using the Type-C data cable from the packaging.
The Indicator light on the M S ON TER flashes white.
2 Connect an Ethernet cable from the router that is on the same local network as your PS5 console to the Ethernet port of the M S ON TER. (Then wait for Remote Play pairing.)
3 Connect the keyboard/mouse to the keyboard/mouse interface.
(If you are using a high-power keyboard/mouse, it is recommended to connect an extra
power supply to M S ON TER.)
PS5 Remote Play Binding Steps
1 Connect to the GEEKVICE APP and switch the M S ON TER to PS5 Mode (make sure the light of the ethernet port is on, if not, please reseat it.)
2 Use the PS5 controller to open the PS5 Remote Play pairing:
“Settings -> System -> Remote Play -> Enable Remote Play”.
On the Associate Devices page, an eight-digit pairing code will be generated.
Please complete the following steps as soon as possible within the pairing validity period.
eight-digit pairing code
CONNECT MONSTER to PS4/PS3
Connection diagram
*TYPE-C 1
PS4/PS3 Console
1
TYPE-C 2
Extra Power
4 After submitting your account, enter the eight-digit pairing code from the PS5 console in
step 2, and then click “Save Config”. Wait 15-30 seconds until the purple indicator light turns
solid, indicating that M S ON TER has successfully connected to the PS5.
NOTES:ª
F After PS5 Remote Play is successfully bound, there is no need to re-bind. Please make sure
that the PS5 is logged in with the same account and is in the same local area network
F Make sure you have connected the network cable before entering the pairing code. If not, please get the pairing code again on the PS5.
APP SETTING steps:
F For connection steps, please refer to the APP connection instructions below F Make sure the application is configured for the corresponding game platform F For more detailed tutorials, please go to GEEKVICE APP SETTING STEPS page.
Connection troubleshooting:
If the connection is not successful and the purple light is flashing for PS5 with M S , ON TER you can try the following solutions¿
F Check if the Ethernet cable connected to the M S ON TER is the same network as the one
used by the PS5 console F Verify that the account logged into the PS5 console matches the account bound to the app F Double-check the accuracy of the eight-digit pairing code entered F Ensure that Remote Play is enabled on the PS5 console F Check if the Ethernet port on the M S ON TER has a solid light indicating a proper
F Try using a different Ethernet cable to connect the M S ON TER and the PS5 console.
CONNECT MONSTER to xBOX
Connection diagram
*TYPE-C 1
XONE/XSS/XSX/X360 Console
1
TYPE-C 2
Extra Power
*USB 1
Keyboard/Mouse
3
*USB3
2
Original Controller
Solid Blue Light
= Successful Connection
*USB 2
3
Keyboard/Mouse
*USB 1
Keyboard/Mouse
3
*USB3
2
Original Controller
Solid Green Light
= Successful Connection
*USB 2
3
Keyboard/Mouse
settings on the ps4 (PS3: Skip this setting)
Go to “Settings > Devices > Controllers > Communication Method > Use USB cable”
MONSTER Connection Steps
1 Plug M S ON TER into your PS4/PS3 console using the Type-C data cable from the packaging.
The Indicator light on the M S ON TER flashes white.
2 Connect to the GEEKVICE APP and switch the M S ON TER to Universal Mode
3 Use the micro-USB data cable from the packaging to connect the PS4/PS3 original controller to the controller port of the M S ON TER. If the indicator light is solid , blue the connection is successful.
(It is recommended to turn off the controller before connecting it to the M S ON TER.)
4 Connect the keyboard/mouse to the keyboard/mouse interface.
(If you are using a high-power keyboard/mouse, it is recommended to connect an extra power supply to the M S ON TER.)
APP SETTING NOTEs:
F For connection steps, please refer to the APP connection instructions below F Switch the M S ON TER to Universal Mod F Make sure the application is configured for the corresponding game platform F For more detailed tutorials, please go to the GEEKVICE APP SETTING STEPS page.
Connection troubleshooting:
If the connection is not successful and the white light is blinking, you can try the following
solutions¿ F Check if you have selected the USB wired connection method in the PS4 console settings F Replug the data cable connecting the controller F Turn off the controller and then connect it to the converter
F Make sure the data cable connected to the PS4/PS3 console is plugged into the M S ON TER
data port, not the power port F Try using a different USB port on your console F Ensure that the PS4 controller is an original controller
F Try using a different data cable.
MONSTER Connection Steps
1 Plug M S ON TER into your XBOX console using the Type-C data cable from the packaging.
The Indicator light on the M S ON TER flashes white.
2 Connect to the GEEKVICE APP and switch the M S ON TER to Universal Mode
3 Use the USB data cable from the packaging to connect the XBOX original controller to the controller port of M S ON TER. If the indicator light is solid g , reen the connection is successful.
(It is recommended to turn off the controller before connecting it to M S ON TER.)
4 Connect the keyboard/mouse to the keyboard/mouse interface.
(If you are using a high-power keyboard/mouse, it is recommended to connect an extra power supply to M S ON TER.)
APP SETTING NOTEs:
F For connection steps, please refer to the APP connection instructions below F Switch the M S ON TER to Universal Mod F Make sure the application is configured for the corresponding game platform F For more detailed tutorials, please go to the GEEKVICE APP SETTING STEPS page.
Connection troubleshooting:
If the connection is not successful and the white light is blinking, you can try the following
solutions¿ F Ensure that the controller is the original controller of the corresponding game console. The
authorized controller is not supported F Replug the data cable connecting the controller F Turn off the controller and then connect it to the M S ON TER
F Make sure the data cable connected to the XBOX console is plugged into the AX600 data
port, not the power port F Try using a different USB port on your console
F Try using a different data cable.
CONNECT MONSTER to NS
CONNECT MONSTER to PC
Connection diagram
*TYPE-C 1
NS Console
1
TYPE-C 2
Extra Power
Connection diagram
*TYPE-C 1
PC
1
TYPE-C 2
Extra Power
*USB 1
Keyboard/Mouse
2
Solid Red Light
= Successful Connection
*USB 2
2
Keyboard/Mouse
*USB 1
Keyboard/Mouse
2
Solid Green Light
= Successful Connection
to X360 Launch Mode
*USB 2
2
Keyboard/Mouse
settings on the NS console
Go to Switch “System Settings > Controller and Sensors > Pro controller Wired Connection”, and adjust it to the “ON” state
MONSTER Connection Steps
1 Connection method 1: Plug M S ON TER into your NS console using the Type-C data cable and OTG adapter from the packaging. The Indicator light on the M S ON TER flashes white.
Connection method 2: If you’re in TV mode, plug M S ON TER into the N-Switch TV Dock with the Type-C data cable. The Indicator light on the M S ON TER flashes white.
2 Connect to the G IC EEKV E APP and switch the default mode in the device information to Switch Launch Mode. If the indicator light is solid , red the connection is successful.
3 Connect the keyboard/mouse to the keyboard/mouse interface.
(If you are using a high-power keyboard/mouse, it is recommended to connect an extra power supply to M S ON TER.)
APP SETTING steps:
F For connection steps, please go to the GEEKVICE APP SETTING STEPS page
F Make sure the application is configured for the corresponding game platform.
Connection troubleshooting:
If the connection is not successful and the white light is blinking, you can try the following
solutions¿ F Check if you have selected the Pro controller Wired Connection in the NS console settings F Make sure the Default model in the device information is switched to Switch Launch Mod F Replug the data cable connecting the controller F Turn off the controller and then connect it to the converter
F Make sure the data cable connected to the NS console is plugged into the M S ON TER data
port, not the power port F Try using a different USB port on your console
F Try using a different data cable.
GEEKVICE APP SETTING STEPS1
APP connection steps
1 Install the mobile app: You can scan the QR code below or search for “GEEKVICE” in the
Google/APP Store and install it. (Make sure the app is the latest version)
settings on the PC
It is recommended to start platforms that support gamepads on PC first, such as STEAM, EA, or the game controller test page.
MONSTER Connection Steps
1 Plug M S ON TER into your PC using the Type-C data cable from the packaging.
The Indicator light on the M S ON TER flashes white.
2 Connect to G IC EEKV E APP. It is recommended to switch the default mode in the device
information to X360 Launch Mode (this mode supports the “FLEX MAPPING” function). If the indicator light is solid green, the connection is successful.
You can also choose PS4 mode b( lue gli ht) and SWITCH mode r( ed gli ht)
3 Connect the keyboard/mouse to the keyboard/mouse interface.
(If you are using a high-power K&M, it is recommended to connect an extra power supply to
M S ON TER.)
APP SETTING steps:
F For connection steps, please go to GEEKVICE APP SETTING STEPS page
F Make sure the application is configured for the corresponding game platform.
NOTES:
Since your keyboard and mouse are connected to the PC through M S , ON TER the computer will
recognize them as a gamepad, which means you can’t control them like a traditional keyboard and mouse. You can switch between Controller Mode and Keyboard and Mouse Mode through the FLEX MAP function. For detailed settings, please go to the official website to view the
video tutorial.
Connection troubleshooting:
If the connection is not successful and the white light is blinking, you can try the following
solutions¿ F Replug and restart the computer F Update the USB driver F Change the USB port F Connect the M S ON TER to the docking station
F If you have changed the default mode to Switch or PS4 mode in the app, make sure to open
the testing website or Steam platform to recognize it as a controller for successful
connection.
GEEKVICE APP SETTING STEPS2
APP Connection troubleshooting:
1( ) Check whether the indicator light of converter is on normally
2( ) Check whether Bluetooth permission and location permission are enabled
(3) Since the device needs to be connected through app scanning, if you have already connected the device’s Bluetooth in the phone’s Bluetooth settings, please cancel the pairing and use the app to scan and connect again.
APP Download
2 When you install the app for the first time, the app will request Bluetooth and location
AX200
permissions. Please select Allow authorization for all permissions to avoid connection
failures.
Turn on Bluetooth
Make sure both options are turned on
3 Add a M S ON TER connection via the G IC EEKV E app:
MONSTER
1. Turn on Bluetooth and find the connected device;
t Click “Unpair”
Firmware Update
After successfully connecting, please make sure your device firmware is up to date. If a version upgrade is available, you’ll see a prompt for ‘New Firmware’. Click it to complete the upgrade.
Click “Add”
2. Waiting for connection
· Connection succeeded
Click “New Firmware” t Click “Upgrade”
· First stage upgrade B Second stage upgrade
Scan the QR code to view the detailed
APP video tutorial
Documents / Resources
 |
AIMZENIX Monster Keyboard and Mouse Adapter [pdf] User Manual 202506, Monster Keyboard and Mouse Adapter, Monster, Keyboard and Mouse Adapter, Mouse Adapter, Adapter |