Aideepen Adjustable Mist Module Instructions

Aideepen Logo

Specification

Features:

  1. Three-level mist output adjustment: Meets diverse environmental needs with flexible misting effects for enhanced adaptability.
  2. High-efficiency atomization: Micro-pore atomization plate with a resonant frequency of 108-110KHz delivers fine, uniform mist.
  3. Low-power design: Rated power 1.5-2W for effective energy savings, ideal for prolonged stable operation.
  4. Compact and lightweight structure: Small footprint for easy integration into various devices.
  5. Convenient operation: Simple four-step installation; activates upon water contact for effortless use.

Module Specifications:

Name: Single-nozzle adjustable mist output
Material: 1.2MM FR-4
Power Interface: Type-C
Rated Voltage: DC5V (Power Supply)
Rated Current: 300mA
Power: 1.5-2W
Atomization Frequency: 108kHz ± 2kHz
Mainboard Dimensions: 35mm x 19mm (Board Thickness: 1.2mm)
Atomization Plate Parameters:
Name: Micro-Pore Atomization Plate
Drive Voltage: 5V
Resonance Frequency: 108-110kHz ± 5kHz
Rated Power: 2W
Pore Size: 4-5μm
Number of Holes: 800
Silicone Sleeve Outer Diameter: 20mm
Rubber Ring Thickness: 3mm
Steel Plate Diameter: 16mm
Wire Length: 100mm
Wire Terminal: PH2.0
Plastic Holder Cotton Swab: 100mm x 8mm

Usage Instructions:

  1. First install the atomizer plate support cotton swab
  2. Connect the atomizer plate to the module’s atomizer port
  3. Then connect the power supply to the module’s power port
  4. Press the power switch
  5. Atomizer plate sprays mist upon contact with water

Precautions:

  1. Never puncture the atomizer plate; do not bend or pull the solder joints
  2. Never power on without connecting the atomizer plate
  3. Never use a fast charger.
  4. Never modify the module.
  5. Keep the module away from water.
  6. Position the full steel plate (raised side) downward for contact; the cotton swab absorbs water.
  7. Use rated power input.

Product List:

Set 1: 1X Humidifier Module
Set 2: 1X Humidifier Module
1X Atomization Plate
1X Holder
1X Cotton Swab

Picture

Single module

Aideepen Adjustable Mist Module

Module + Fogging pads + Cotton swabs + Black holder

Aideepen Adjustable Mist Module - Fig

Module Size

Aideepen Adjustable Mist Module - Fig 1

Humidifier module parameter
Name: Adjustable fog volume single spray Material: 1.2MMFR-4
Power interface: TYPE-C
Rated voltage: DC5V (power supply)
Rated current: 300MA Atomization frequency :108KHZ+2KHZ
Power: 1.52W
Motherboard size: 35mm*19mm (board thickness 1.2mm)

Aideepen Adjustable Mist Module - Fig 2

Three adjustable fog levels

Aideepen Adjustable Mist Module - Fig 3

Adjustable mist volume
Three speeds can be selected

Aideepen Adjustable Mist Module - Fig 4

Large mist spray humidifier
Three-speedistvolume | Fogging line 10CM 2.0 terminals /Ttomismxon test
Botanical Moisturising Pet Cleaning

Aideepen Adjustable Mist Module - Fig 5

Interface Description:

Aideepen Adjustable Mist Module - Power

Aideepen Adjustable Mist Module - Power 1

Aideepen Logo

Documents / Resources

PDF thumbnailAdjustable Mist Module
Instructions · Adjustable mist module, humidifier module, mist maker

References

Ask a Question

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Ask a Question

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.