Light Fixture Instruction
Product Profile & Packing
1.1 Profile
3 Bar Lights Kit ( UK Plug, US Plug, EU Plug For Your Choice )
A1=150cm/59inch
A4=35cm/13.8inch
A2=50cm/19.6inch
A3=30cm/11.8inch
A5=27.6cm/10.87inch
A6=25cm/9.8inch or 55cm/21.7inch
4 Bar Lights Kit ( UK Plug, US Plug, EU Plug For Your Choice )
B1=150cm/59inch
B2=50cm/19.6inch
B3=30cm/11.8inch
B4=35cm/13.8inch
B5=27.6cm/10.87inch
B6=25cm/9.8inch or 55cm/21.7inch
6 Bar Lights Kit ( UK Plug, US Plug, EU Plug For Your Choice )
C1=150cm/59inch
C2=50cm/19.6inch
C3=30cm/11.8inch
C4=30cm/11.8inch
C5=C7=15cm/5.9inch or 50cm/19.6inch or 150cm/59inch
C6=27.6cm/10.87inch 
8 Bar Lights Kit ( UK Plug, US Plug, EU Plug For Your Choice )
D1=120cm/47.2inch
D2=106cm/41.7inch
D3=50cm/19.6inch
D4=30cm/11.8inch
D5=30cm/11.8inch
D6=D8=15cm/5.9inch or 50cm/19.6inch or 150cm/59inch
D7=27.6cm/10.87inch 
Note: The connection ways of all puck lights kits in above pictures shown are one of the connection methods. There are various ways to connect light fixture. Refer to Step1: Connection Of Bar Lights Kit, the detailed connection method is explained below.
1.2 Packing List
| NO | Part Name | Specifications | 3 Bar Lights Kit |
4 Bar Lights Kit |
6 Bar Lights Kit |
8 Bar Lights KE |
| A | Adapter | L=150cm/59inch, Optional Plugs: US Plug UK Plug, EU Plug. Input: AC 100-240V 50/60HZ 12V 1A | 1 | 1 | ||
| B | Adapter | L=150cm/59inch, Optional Plugs: US Plug, UK Plug, EU Plug. Input: AC 100-240V 50/60HZ 12V 1.5A | 1 | |||
| C | Rug Cord | L=120cm/ 47.2inch, Optional Plugs: US Plug, UK Rug, EU Plug. | 1 | |||
| D | Adapter | L=100cm/39.4inch, Input: AC 100-240V 50/60HZ 12V 3A |
1 | |||
| r E |
Conversion Connection Cord | L=35cm/13.77inch | 1 | 1 | ||
| F | Short Connection Cords | L=15cm/5.9inch | 2 | 3 | 4 | 6 |
| K | CordsLong Connection | L=50cm/19.6inch | 2 | 3 | 5 | 7 |
| L | Extension Cords | L=150cm/59inch | 2 | 2 | ||
| G | On/Off Switch | L=50cm/19.6inch | 1 | 1 | 1 | 1 |
| H | 2 Way Splitter | L=30cm/11.8inch | 1 | 1 | ||
| I | LED Bar Lights | L=27.6cm/10.87inch | 3 | 4 | 6 | 8 |
| M | Conversion Connector | Black Connector | 1 | 1 | ||
| 1 | Dimmer | L=30cm/11.8inch, Black | 1 | 1 | 1 | 1 |
| P | Screws | ST3.5x10mm, Phillips Self-tapping Screw |
6 | 8 | 12 | 16 |
| Q | Cable Clips | Black Plastic | 9 | 8 | 8 | 10 |
| S | Metal Clips | Stainless Steel | 6 | 12 | 12 | 16 |
| T | wo Sided Stickers | Rectangle，Dimension: 50x20mm | 4 | 6 | 18 | 24 |
Specification for the LED light
Size: L=27.6cm/10.87inch C=2.5cm/0.98inch D=0.8cm/0.31inch
Power: 3W
Voltage: DC 12V
Beam angle: 120deg
Installation
Warning: Please read the instruction carefully and turn electricity off before beginning installation.
- To avoid equipment damage or other accidents caused by short circuit, please ensure that the connectors are fully inserted when connecting the wires.
- Please install the Adapter( A/B/D) in a well-ventilated place where the ambient temperature is appropriate.
- If you find some issues after installation, please try to fix them according to the below Fault Analysis & Solution. If the issues still won’t be solved, please contact the seller for support.
Step1: Connection Of LED Bar Lights Kit
Connection Of 3 LED Bar Lights Kit
Connection Of 4 LED Bar Lights Kit 
Connection Of 6 LED Bar Lights Kit
Way I: 6 bar lights ( I ) are divided into two sides for connection. 
Way II: 6 bar lights ( I )are connected in series. 
Connection Of 8 LED Bar Lights Kit
Way I: 8 bar lights ( I ) are divided into two sides for connection.
Way II: 8 bar lights ( I ) are connected in series. 
Note:
- The adapter ( D ) can be connected directly with the 2 way splitter ( H ) or conversion connection cord ( E ) without the component dimmer ( J ) & on/off switch ( G ).
- The 2 way splitter( H )doesn’t need to connect with bar lig
Step 2: Two Installation Ways Of LED Bar Lights 
1.Installation Ways I: Mounted With Screws ( P )
Use the screws to lock metal clips ( S ), then put the bar light into metal clips ( S ).
2.Installation Ways II: Install with Two Sided Stickers ( T )
Clean the surface and then stick on the bar light with the stickers ( T ).
Step3: Fix the Connection Cords
Use the cable clips ( Q ) to fix the connection cords in somewhere you need.
Step4: Usage Of Dimmer
Adjust the brightness & turn on/off of the bar lights with the knob on the dimmer.
Fault Analysis & Solutions
| Fault Phenomenon | Fault Analysis | Solutions |
| All lights are not on | 1. Remove the on/off switch ( G ), it is the issue of the on/off switch ( G ) if all the lights can turn on. 2. Remove the dimmer ( J ), it is the issue of the dimmer if all the lights can turn on. 3. Remove the dimmer ( J ) & on/off switch ( G ), then get the adapter connected with the 2 way splitter( H ) or conversion connection cord ( E ) directly. If all the lights still don’t work, it is the issue of the adapter. |
1.Replace the on/off switch 2.Replace the dimmer 3.Replace the adapter |
| Individual light is not on | 4.only install one defective bar light ( I ) for the troubleshooting. If it still doesn’t work, it is the defective bar light. | 4.Replace the bar light |
Documents / Resources
 |
AIBOO A1 LED Under Counter Light Rigid Bar Kit [pdf] Instructions A1 LED Under Counter Light Rigid Bar Kit, A1, LED Under Counter Light Rigid Bar Kit, Counter Light Rigid Bar Kit, Light Rigid Bar Kit, Rigid Bar Kit, Bar Kit |