AIAIAI TMA-2 S11 Wireless Upgrade Kit
Specifications
- Model: VW#!#$% &” ())! )*+ .XY##)#)#) #,&
- Color: E/76(C
OVERVIEW
Product Usage Instructions
GETTING STARTED – W+ LINK
- Power On S11:
Push in the joystick until the LED turns on. - Power On X03:
Hold the control button until the LED turns on. - Pairing complete:
S11 and X03 will pair automatically. The LEDs will be constant white to confirm successful pairing.
Remark: S11 supports 2.4G receive only,
Transmitter supports 2.4G transmit only
GETTING STARTED – BLUETOOTH
- Switch to Bluetooth Mode:
Double tap the joystick on S11, and the LED will turn blue. - Connect to Bluetooth:
Find “AIAIAI S11” in your phone or computer device’s Bluetooth settings and click “Pair”.
Pairing mode
- S11+X03: From off, hold the joystick/button for 4 seconds, until the LED starts blinking fast.
Check battery level
- S11:Turn off S11. LED shows level for 1sec.
- X03:Press the button once.
- RED: <10 hours/ Green: 10+ hours
WARRANTY
- S11 and X03 are covered by a 2 year limited warranty. Become a member to get your 3 year extended warranty.
Regulatory Info
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
ALAIAT US Agent Address 946 Yale St., #39F Los Angeles, CA 90012
This guide covers the essential setup and controls for the S11 speaker units and X03 transmitter.
Frequently Asked Questions
How do I replace the batteries?
To replace the batteries, refer to the user manual for detailed instructions on accessing the battery compartment and inserting new batteries following the correct polarity.
Is the product waterproof?
No, this product is not waterproof. Avoid exposing it to water or moisture to prevent damage.
Can I use this product with other accessories?
Yes, you can enhance your experience by using compatible accessories designed for this product. Ensure they are compatible before attaching them.
Documents / Resources
 |
AIAIAI TMA-2 S11 Wireless Upgrade Kit [pdf] User Guide 2AKSOX0301, 2AKSOX0301, x0301, TMA-2 S11 Wireless Upgrade Kit, TMA-2 S11, Wireless Upgrade Kit, Upgrade Kit, Kit |