AHD 1080P Backup Camera System with 7 Inch DVR Dual Split Screen Monitor Instructions
AHD 1080P Backup Camera System with 7 Inch DVR Dual Split Screen Monitor

Function keys

 

Function keys

Key introductions

  1. AHD channel switch button
  2. Compound confirmation key
    a. Short press confirm menu function, picture mode video cameras, videomode began to stop function, theplayback mode playback function; b.Long press to switch video, photo, playback modes;
  3. Menu button
  4. Reduce, key menu page up button;
  5. Plus, menu page down keys
  6. Power key

The remote control function

Remote control

  1. POWER : Switch for power supply
  2. VIDEO : V1 / 2 selecting
  3. VOL +: Increase button / select channel
  4. MENU : ( brightness , colors , contrast ) button
  5. MODE : Selecting results of display
  6. VOL – : Reduces button / select channel

Function parameters

Screen dimensions : 7 inch
Resolution : 1024 ( W ) X RGB X 60(H)
Brightness : 500 cd/m2 Screen Angle : the Angle of view ( IPS )
System : PAL/NTSC
Power : DC 12V-35V
Consumption : 6W
Video : two way video input

Menu

Menu}
Menu
Menu

  1. connect black line to the 12v-14v negative power –
  2. connect red line to the 12V-14V ACC. 3.connect yellow line to the 12V-14V positive power +
  3. connect green line to the positive of the reverse light +

Note: If you connect blue cable,when you put rear gear,the screen will automatically switch to V2 image. If you do not need this function,you leave blue cable disconnected,and covered by insulating tape.

Documents / Resources

AHD 1080P Backup Camera System with 7 Inch DVR Dual Split Screen Monitor [pdf] Instructions
1080P Backup Camera System with 7 Inch DVR Dual Split Screen Monitor, 1080P Backup Camera System

Leave a comment

Your email address will not be published.