AGIma X6 Projector
Attention
Please read this manual carefully before use and keep it for future reference.
- The projector is non dustproof or waterproof.
- In order to reduce the risk of fire and electric shock, do not expose the projector to rain and fog.
- Please use the original power adapter. The projector should work under specified rated power supply.
- When projector is working, please do not look directly into the lens, the strong light will flash your eyes and cause slight pain. Children should use the projector under the supervision of adults.
- Do not cover the vents of projector. Heating will reduce the life of projector and cause danger.
- Regularly clean projector vents, or dust may cause cooling malfunction.
- Do not use the projector in greasy, damp, dusty or smoky environment. Oil or chemicals will cause malfunction.
- Please handle with care during daily use.
- Please cut off the power if the projector is out of use for long time.
- Non-professionals are forbidden to disassemble the projector for testing and maintenance.
Product Overview
- Lens
- IR Receiver
- IR Receiver
- Audio Output Port
- HDMI Port
- USB Port 1
- USB Port 2
- Power Input
- Foucs
- Power Button
- Source
- Menu
- Return
- Move Up
- Move Down
- Move Left
- Move Right
- OK
Notice
Projector Remote
- POWER: Press to power ON /Press twice to power OFF
- ASPECT RATIO: The zoom key increases and decreases the screen
- MENU: This key is the setting key and the menu key
- SCREEN FLIP: The flip button flips the screen
- SOURCE: source button can be pressed to bring out the source
- ARROWS/OK: Press to navigate and confrm selections in Settings and other menus
- HOME: Click to open or return to the home page.
- RETURN/EXIT: Press to exit the projector menu
- MUTE: Press to mute volume
- VOL+/VOL –: Press to adjust audio level
After the projector starts working, if you move the projector, the projector will perform automatic focus adjustment to get the best sharpness. You can also use motorised focus to assist with the correction
Install/Remove Battery Of Remote
Using the Remote Control
- Do not mix old and new batteries in the remote
- Do not use different types of battery
- lf you do not intend to use the unit for a long time, please remove batteries from the remote to avoid accident.
- Keep batteries away from children and pets.
- Never throw batteries into a fire.
- Do not drop, or impact the remote control as it void warranty immediately
- The remote control operate at a range of 5 to 6M effectively
- Do not expose the remote control sensor to a bright light.
Turn on/Turn off the projector
TURN ON
- Plug the projector into a power source. Indicator light: Red.
- Press the power button
.
Indicator light: White - The projector turned on after 5-10 seconds.
TURN OFF
- Turn off the power button
- Unplug the power adapter.
Note
Please turn off the projector before unplugging the power source, so as not to affect the life and operation of the projector.
Projection Distance and Size
Recommended Projection Distance: 2.75 -10 feet.
WIFI CONNECTION
- Go to Home page > Settings > Network Setting
- Activate the WiFi button
- Select your WiFi, then enter the password to connect to WiFi
NOTE:
lf you need screen mirroring, the speed of your home network is directlyrelated to the smoothness of video play. Please make sure that the networkis good to have a smoother playback.
Bluetooth Setting
- Go to Homepage > Settings > Advanced Settings >Bluetooth Setting
- Press the OK button on the remote control to enter the bluetooth connection interface.
- Choose correct Bluetooth device to connect.
AirPin PRO – iOS Cast (for iOS devices)
AirPin PRO is compatible with iPhones, iPads
Please make sure the projector and Android or iOS device are connected to the same WiFi
In addition to home WiFi, you can also have the projector connect to your mobile phone’s hotspot. This will also put your phone and projector on the same network. This can be used successfully with AirPin PRO
The following is the step-by-step guide to using AirPin PRO:
- Step 1. Connect the projector and the iOS or Android device to the same WiFi/Hotspot
- Step 2. Find and Open the ‘AirPin PRO’ App on the projector.
- Step 3. Operations on your Apple device: Turn on ‘Screen Mirroring’→Wait for searching→Connect the projector device
Tips: Manually resting the screen the video will stop playing, but the sound will continue to play. Do not manually rest the screen while playing video
If you can’t find AirPin PRO, please check the images below which can help you: Access Home→Apps→My Apps→AirPin PRO
Miracast – Android Cast (for Android devices)
- Step 1: As shown in the image below, activate the WiFi function on the projector, then activate the WiFi function on your Android device (phone or tablet).
Step 2: Open Miracast: HOME → APPS → My Apps → imirror. 
Once you have found imirror, click to access the imirror application, stay on the imirror page and start step 3 
- Step 3. Operations on your Android devices(phone or tablet) Turn on the ‘Screen CAST →for searching→Connect the projector
HDMI Function
- Step 1. Use an HDMl cable to connect to the projector’s HDMl port
- Step 2. Then plug the other end of the HDMl cable into the HDMl port on the laptop or computer
- Step 3. When the HDMl cable is successfully connected to the laptop, please click ‘yes’ and done.
You can also just press the signal button on the remote control to quickly find the HDMI option.
Manual Focus
Adjust focus ring to get the best image performance.
Points Keystone
- Go to Homepage > Settings > Basic Settings > Keystone
- Choose Four Corner Adjustment
- Press Direction Buttons to adjust the position, Press “OK” button to jump to the next corneradiustment, and when the circle in the center is a perfect circle, the screen ratio conforms tothe system settings.
Advanced Settings
Setting Items Reset Settings
- Go to Homepage > Settings > Advanced Settings > Reset Settings
- Press the OK button on the remote control and select
on the screen. - Please wait, the projector will enter the system restart
Factory Reset Settings
- Go to Homepage > Settings > Advanced Settings > Factory Reset Settings
- Press the OK button on the remote control and select on the screen.
- Please wait while the projector is restored to factory settings.
NOTE:
If you enter recovery mode, all your saved data and records will be deleted.
Attention:
Please do not look directly into the lens when projecting to prevent the strong light doing harm to your eyes. Kids should use the projector under the supervision of adults
Frequently Asked Questions
Q: How do I adjust the focus on the projector?
A: To adjust focus, use the manual focus ring for optimal image performance.
Q: How do I connect my iOS device for screen mirroring?
A: Follow these steps:
- Step 1. Connect the projector and iOS device to the same WiFi/Hotspot.
- Step 2. Open the ‘AirPin PRO’ App on the projector.
- Step 3. On your Apple device, turn on ‘Screen Mirroring’ and connect to the projector device.
Documents / Resources
 |
AGIma X6 Projector [pdf] Installation Guide AG1ma, X6, X6 Projector, X6, Projector |