AFX LIGHT 10-6008 DJ LED Panel With Remote Control User Manual

PRODUCT OVERVIEW

CONTROLLER FRONT PANEL

CONTROLLER REAR PANEL

WIRELESS REMOTE CONTROLLER

PANEL

CONNECTORS

POWER INPUT

DMX CHANNELS

CONTROL PANEL FUNCTIONS IN “ACT” MODE

SP0-SP9               ST-1- ST-08Strobe from slow to fastST-9:Sound                 FC-0 – FC-8Basic colour              FR-0- FR-99FG-0- FG-99FB-0- FB-99Any co- lour                CC-0 – CC-9Colour change from slow to fastSANTEWhite

VIDEO LIST

UNPACKING INSTRUCTIONS

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present and have been received in good condition. Notify the freight company immediately and retain packing material for inspection if any parts appear to be damaged from shipping or the carton itself shows signs of mishandling. Keep the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.

CONTENTS OF THE CARTON

• 4 pcs LED panels
• 1 pc control unit
• 1 pc. user manual
• 1 pc. wireless BT controller

EXPLANATION OF SYMBOLS ON THE SILKSCREEN

The triangle containing a lightning symbol is used to indicate whenever your health is at risk (due to electrocution, for example).
An exclamation mark in a triangle indicates particular risks in handling or operating the appliance.
Class I protection: Connect only to an earthed mains outlet
The unit complies with UK standards
For indoor use only
Minimum distance between the appliance and other objects
Do not stare into the light beam
  CAUTION
DO NOT OPEN THE HOUSING SHOCK HAZARD

Please read this manual carefully before operating this product.

SAFETY RECOMMENDATIONS

• Please read these instructions carefully, they include important information about the installation, usage and maintenance of this product.
• The appliance is part of class I and must exclusively connected to an earthed mains outlet.
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are nonflammable materials close to the unit while operating.
• The max. ambient temperature (Ta) is 40°C. Don’t operate the fixture at higher temperatures.
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction.
  Please contact the nearest authorized technical assistance center. Always use the same type of spare parts.
• Make sure the power cord is never crimped or damaged.
• Avoid direct eye exposure to the light source while it is on as sensitive persons may suffer an epileptic shock (especially meant for epileptics)!.
• The light source of this fixture is not replaceable. When the light source reaches its end of life, the whole fixture needs to be replaced. The product is not intended for household and domestic use.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
• The lenses, housing or ultraviolet filter must be replaced if they are visibly damaged.

DISCONNECT DEVICE

The power outlet must be installed near the equipment and be easily accessible.

FRONT PANEL DESCRIPTION OF THE CONTROL UNIT

1. Bluetooth signal sensor
2.  MIC for sound-controlled operation
3. POWER led: lights up when the unit is on
4. SIGNAL led: lights up when the unit receives a signal
5. Control panel with LCD display and control buttons
6. SD card input: plug the supplied SD card that contains all pictures and videos

REAR PANEL DESCRIPTION OF THE CONTROL UNIT

1. Audio output via 3.5mm Jack: connect the output to an active box, etc. to listen to the sound of the videos on the SD card
2. POWER OUT: DC and signal output. Link this cable to the first LED panel
3. DC output only
4. DMX OUT: 3-pin XLR connector that sends the DMX signal to another unit in master-slave mode
5. POWER IN: Connect the supplied mains adaptor to this input and the other end into an appropriate mains outlet with earth connection
6. DMX IN: 3-pin XLR connector for connection to a DMX controller
7. ON/OFF switch

OPERATING INSTRUCTIONS

CONTROL PANEL (5)
The control panel allows to make the settings. It has a small LCD screen and four buttons, which are described hereafter.
Button Function
<MENU>: Scrolls through the first level of options, or exits from the current menu or function
<UP>: Navigates upward through the menu list or increases the numeric value when in a function
<DOWN>: Navigates downward through the menu list or decreases the numeric value when in a function
<ENTER>: Enables the currently displayed menu or sets the currently selected value in to the cur-rent function

MENU STRUCTURE

SOUND ACTIVATED/AUTOMATIC MODE

Set the control panel to Text scrolling, strobe, color change, fade speed or sound active and you can adjust the font colour in the digital menu.

MASTER/SLAVE MODE
Connect the control units via the DMX IN and OUT connectors. All units will follow the master unit.

DMX CONTROL
Connect the control unit to a DMX console and set up the DMX address.
OPERATION OF WIRELESS BT CONTROLLER

TOP PANEL DESCRIPTION

1. Bluetooth signal indicator
2. Power signal indicator
3. ON/OFF button
4. LCD display
5. Control panel

CONNECTORS

1. DMX input
2. DMX output
3. Charger input

OPERATION
Use the 4 buttons to operate the wireless remote controller.

MENU MAP 

DMX WIRELESS CONTROL
The Controller can be connected to a DMX controller to send wireless signals to an unlimited number of DJ-LEDPANELs.
Select the desired function on the DMX controller and the wireless BT controller will send the signal to the units.

SPECIFICATIONS OF THE WIRELESS BT CONTROLLER

USB charge voltage : 5V? 1000mA
Built-in Lithium battery : 3.7V? 1000mA
Working current : 5V? 100mA
Weight : 0.2kg
Dimensions: 110 x 88 x 30mm

SPECIFICATIONS

Input voltage : 100-240V~ 50/60Hz mains adaptor
Output voltage : 2 x 5V 40A
Consumption : 400W
Total dimensions : 2320 x 40 x 1140mm
Total net weight : 32kg
Dimensions of a panel : 580 x 40 x 1140mm
Dimensions of the flight case : 1363 x 371 x 786 mm
Weight of empty flight case : 40kg
Dimensions controller : 315 x 142 x 163mm
Weight of the controller : 2.9kg
Total weight : 75kg
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed.

AFXLIGHTPRO

Download the manualin other languages

Assembled in PRC
Designed by LOTRONIC S.A.
Rue F. Englert 17
Bt 2 · 1480 Tubize
Belgium · info@lotronic.net

Documents / Resources

AFX LIGHT 10-6008 DJ LED Panel With Remote Control [pdf] User Manual 10-6008 DJ LED Panel With Remote Control, 10-6008, DJ LED Panel With Remote Control, Panel With Remote Control, Remote Control

References

• User Manual