AF-CSC-60C Snack and Drink Vending Machine
“
Specifications:
- Product type: Snack & drink vending machine
- Product model: AF-CSC-60C(H5)
- Product dimensions: Height 1989mm x Length 1055mm x Width
794mm - Net weight: 256kg
- Rated power: 420W
- Working voltage: AC 110V, 60Hz
- Rated current: 6A
- Internal temperature:
- Product exterior color: Cabinet and door – Black, Panel –
Orange (customization available) - Total power consumption:
- Noise level: 70dB
- Water and dust resistance: The whole machine meets IP20
protection requirements - Base/legs (number/type): Castor wheel
- Software platform: Microcontroller, other platforms
customizable - Warranty: 1 year (whole machine)
- Certification standards: CQC certification (GB4706.1,
GB4706.72)
Product Usage Instructions:
1. Pre-use Instructions
1.1 Names of Parts:
Refer to the external structure diagram for identification of
various parts such as Door glass, Coin slot, Pick-up outlet, Castor
wheel, Antenna, Speaker outlet, 5-inch screen, Keyboard, Bill
acceptor, Nayax, Door lock, Coin return button, Coin change outlet,
Nameplate, Power cord box, and Refrigeration module.
1.2 Exploded View:
Understand the exploded view of the vending machine parts for
better insight into the assembly.
2. Technical Specifications:
Refer to the provided specifications for details on the product
type, model, dimensions, weight, power requirements, noise level,
and other relevant information.
3. Vending Machine Safety Notice:
- Use a dedicated power outlet with a ground connection to
prevent fire hazards. - Avoid damaging the power cord by not unplugging it by pulling
on the cord and keeping it away from water and areas where it may
be stepped on.
FAQ:
Q: What should I do if the vending machine stops working?
A: If the vending machine stops working, check the power supply,
ensure proper connections, and refer to the troubleshooting section
in the user manual for guidance.
“`
Vending Machine User Manual
Vending Machine User Manual
Model: AF-CSC-60C(H5)(AB05)
Thank you for purchasing our vending machine. Please read and understand the manual carefully to use the vending machine
correctly. Improper operation may cause accidents or hazards.
Contents
1. Safety warning 2. User instructions 3. Common faults explanation 4. Routine cleaning and
maintenance 5. Product warranty card 6. Quality certificate/packing list
Images are for reference only, please operate according to the actual machine! After reading the user manual, please keep it properly for future reference.
1
AFEN Vending Machine
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
1. Pre-use instructions
1.1 Names of parts
(1) External structure diagram
5 6
7 8 9 10 11 12
13
(2) Serial number
No.
Name
1
Door glass
2
Coin slot
3
pick-up outlet
4
Castor wheel
5
Antenna
6
Speaker outlet
7
5-inch screen
8
Keyboard
9
Bill acceptor
10
Nayax
11
Door lock
12
Coin return button
13
Coin change outlet
14
Nameplate
15
Power cord box
16
Refrigeration module
14 15 16
Images are for reference only, operate based on the actual machine.
2
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
1.2 Names of parts
(2) Exploded view
4
1
5
6 2
3
7
2
Images are for reference only, operate based on the actual machine.
(2) Serial number correspondence table
No.
1 2 3 4 5 6 7
Name
Main cabinet body
Pick-up bucket Base
Sub-cabinet body Main door Door glass
pick-up outlet
3
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
2.1 Technical specifications:
Product type
Snack & drink vending machine
Product model Product dimensions Net weight
AF-CSC-60C(H5)
Standard model: height 1989mm x length 1055mm x width 794mm
Standard model: 256kg
Rated power
420W
Working voltage
AC 110V, 60Hz
Rated current
6A
Internal temperature
4~25°C
Product exterior color
Cabinet and door: Black, Panel: Orange (customization available)
Total power consumption
0.42 kW.h/24h (ambient temperature 35°C, 75% humidity, no load, internal temperature 4°C, stable over 24 hours)
Noise
70dB
Water and dust resistance The whole machine meets IP20 protection requirements
Base/legs (number/type) Castor wheel
Software platform
Microcontroller, other platforms customizable
Warranty
Whole certification standards
1 year (whole machine)
machine and
CQC certification (GB4706.1,GB4706.72)
4
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
2.2 Vending machine safety notice
1. The machine typically uses AC 220-240V/50Hz and can operate within a voltage range of 187254V. Operating outside this range may prevent the machine from starting, damage the compressor, or cause abnormal compressor noises (determine the abnormal range based on local actual voltage).
2. Use a dedicated power outlet with a ground connection. Under no circumstances should you cut or disassemble this threeprong plug (ground connection). When the machine is installed, the plug should be easily accessible for convenient insertion and removal. Note! The power plug shall maintain firm contact with the outlet to prevent fire hazards.
3. Do not damage the power cord
a. Do not unplug by pulling on the power cord; always grip the plug firmly and pull directly from the outlet.
b. Do not place the power cord in areas where it may be stepped on or where there is water.
c. Ensure the machine is kept away from the wall; be careful not to roll over or damage the power cord.
4. Do not use the machine if the power cord is damaged or the plug is worn. If the power cord is damaged or worn, it shall be replaced at a service center designated by the manufacturer.
5. Unplug the power cord in the following situations: When cleaning and maintaining or replacing machine parts, unplug the power cord to prevent electric shock.
6. Unauthorized disassembly of the machine is strictly prohibited. Do not damage the refrigeration system’s tubing; maintenance shall be performed by qualified personnel.
7. The pick-up door is heavy; support it with one hand while using the other to retrieve items to prevent pinching. Children shall use the machine under adult supervision (one item per purchase).
8. Operating ambient temperature: -10°C to 35°C.
9. Individuals with physical or intellectual disabilities (including children) shall use this equipment under the supervision or guidance of professional operators.
10. Minors are prohibited from using this equipment unaccompanied.
11. This equipment should only be installed in areas where it can be supervised by operational staff.
12. Only operational staff are allowed to service this equipment and access the server.
13. If the power cord is damaged, it shall be replaced by the manufacturer or professional operators to avoid hazards.
5
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
14. Vending machines are widely used for selling pre-packaged food.
15. Install this equipment in a dry, well-ventilated area.
16. The equipment shall be placed on a level surface.
17. Please be cautious when the lifting device’s motor is operating to prevent hand injuries. Always turn off the power before maintenance and cleaning. Do not attempt to disassemble or repair the motor unless you are a professional or under professional supervision.
18. The equipment’s application scenarios are as follows:
– The equipment can be placed in shopping malls and office buildings. – The equipment can be deployed in hotels, motels, and residential areas.
19. Warning notices:
– Do not obstruct the equipment’s casing and built-in ventilation ports. – Do not use mechanical devices or other methods to accelerate the defrosting process, except as recommended by the manufacturer. – Do not damage the refrigerant circuit. This warning applies only to appliances with refrigerant circuits that are accessible to users. – Do not use electrical appliances in food storage areas unless they are of a type recommended by the manufacturer. – When securing the equipment, ensure the power cord is not trapped or damaged. – Do not place multiple portable outlets or power sources behind the equipment.
20. How to prevent the refrigeration system from freezing?
– Regularly check if the antifreeze level is below the minimum and refill if necessary. – Inspect the ventilation net or evaporator for stains, which could reduce airflow and heat exchange. If necessary, clean promptly.
21. What to do in the event of freezing?
– Turn off the main power switch of the machine and wait for the internal temperature to cool below room temperature. – Check for any ice blockages in the cold water pipes and resolve them promptly. – Turn on the machine’s main power switch, start the machine, check if the water in the tank is flowing, and observe if the machine is operating normally.
22. Do not store explosive materials such as aerosol cans containing flammable propellants in this appliance.
23. The safety of stored food depends on the temperature and duration of storage; maintenance personnel shall regularly replace and dispose of it
24. Asset disposal warning!
There is a risk of injury or suffocation. – Disconnect the appliance from the mains power supply. – Cut off the main power cable and discard it.
6
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
– Remove the door to prevent children and pets from being trapped.
– The refrigerant circuit and insulation material of this appliance are ozonefriendly.
– The insulation foam material contains flammable gases. For information on how to properly dispose of this appliance, please contact municipal authorities.
– Do not damage the parts near the heat exchanger of the cooling unit.
7
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
2.3 Preparation for use and placement environment
1. Upon receiving the machine, first check whether the packaging is intact. If damaged, consult the logistics provider and call our company directly.
2. Before use, remove all packaging components, such as wooden boards, protective films, foam, and zip ties.
3. Place the machine at your business location. It must be dry, well-ventilated, away from heat sources, sheltered from rain, protected from low temperatures, safe from water splashes, and situated on a solid and stable ground, elevated 20cm from the wall.
4. After placing the machine, let it sit for over 30 minutes before turning on the power to ensure it operates correctly. To initiate cooling, the machine should remain idle for 4-5 hours; otherwise, it may affect the compressor. At room temperature, the machine consumes 60W, with a maximum cooling power of 420W.
5. Products for sale shall be compatible with the corresponding spiral vending tracks.
Keep away from heat
Maintain a distance of 20cm or more.
The gaps at the back and sides of the machine shall be 20 centimeters or more.
Avoid contact with water.
Be cautious of low temperatures.
Must be grounded!
War
ning The vending machine’s power supply shall be grounded!
A machine that is not grounded cannot be used! Otherwise, there is a serious safety hazard!
8
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
2.4 Safety precautions
1. The machine operates on a power supply of 110 VAC, 60Hz. Please note that operating the machine without required voltage may result in startup issues, compressor burnout, or abnormal noise.
2. Shall use a reliable, grounded three-prong outlet to avoid the risk of electric shock. After the machine is installed, the plug should be easily accessible.
110V 60Hz
Must be grounded.
3. Do not damage the power cord. a. Always grip the plug firmly (do not pull directly on the power cord) and pull it straight out from the outlet. b. Ensure the machine does not rest on the power cord, nor should the power cord be stepped on. c. When moving the machine away from the wall, be careful not to crush or damage the power cord. d. If the power cord is damaged or the plug is worn, do not continue to use the machine to avoid hazards. It shall be replaced by professionals from the manufacturer or maintenance department.
4. When cleaning, repairing, or replacing parts, unplug the power cord to prevent electrocution.
5. Unauthorized disassembly or modification of the machine is strictly prohibited; repairs shall be carried out by professional personnel.
6. Push the pick-up door with one hand while reaching into the pick-up box with the other hand to retrieve items. The door of the pick-up bucket is quite heavy. Be careful not to trap your hand. When children need to use it, adult assistance is required.
9
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
2.5 Antenna installation
1. Take out the antenna from the accessory pack and insert it into the rubber antenna plug (cut a notch from the center hole to the edge with a blade), as shown, and rotate it clockwise onto the antenna mount on the right side of the cabinet.
2. After tightening the antenna, attach the antenna base to the antenna support plate on the right side of the vending machine cabinet to ensure the machine receives communication signals effectively.
3. Insert the rubber antenna plug into the antenna hole to prevent dust from entering the machine and to provide good support for the antenna.
Cut the rubber antenna plug
Tighten it clockwise
Remove the antenna base
Rubber antenna plug
Antenna support plate
10
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
2.6 Adjusting the height of the vending tray
1. Cut the cable ties, pull out the vending tray, and remove the terminals at the back of the tray.
2. Use a screwdriver to remove the screws from the vending track slides. Adjust the slides to the appropriate height and secure with screws (note: both sides of the slides shall be at the same height).
Vending track slides The distance between two adjacent thread holes is 2cm.
Fixed threads
3. Reconnect the vending tray’s wire terminals, organize and secure the vending tray’s wiring, and push the tray back into the main cabinet.
11
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
2.7 Restocking/loading
1. When a slot in the vending machine is empty, restock the products promptly. Products shall be placed correctly according to the names set on the platform. When opening the door: Insert the key into the lock, turn clockwise, and the lock core will pop out. Hold the lock core and turn counterclockwise about 7 times to open the small door.
2. Products to be restocked in the empty slots should be correctly filled according to the names set on the platform.
3. Precautions for transporting goods
Bagged products shall be inserted at the bottom of the vending tray and tilted towards the vending slot.
The size of the items shall not exceed the gap between the
springs.
Since the vending tray is tilted after loading, do not lift the springs as it may cause the products to drop automatically.
.
Items shall not be wider than the vending slot.
Do not touch the tray above.
After loading the items. Check and confirm that the items are correct, lock the vending cabinet, and store the key securely.
When the vending slot is malfunctioning and the angles are inconsistent, do not pull on the springs. After retesting the vending slot, allow the springs to reset.
12
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
2.8 Replacing the springs
1. Identifying the left-hand and right-hand springs
Note: 1. The first two images are for left-hand springs. 2. The latter two images are for right-hand springs.
Spring terminal
2. Disassembly and installation of springs (for left-hand springs disassembly and installation; for right-hand springs, rotate in the opposite direction)
Disassembly 1. Pull the spring outward and rotate it so that the notch faces upward. 2. Hold the spring and rotate it counterclockwise so that the spring’s terminal aligns with the notch. 3. Pull out the spring.
Pull the spring outward and rotate it
Hold the spring and rotate it
Notch position
Pull out the spring
Installation 1. Insert the spring into the plastic slot. 2. Hold the spring terminal to position it into the notch. 3. Hold the spring and rotate clockwise to secure it into the plastic slot.
Insert into the plastic slot
Terminal enters the notch
Hold the spring and rotate it
13
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
2.9 Installing the SIM card
Removal 1. Press to release the data card, causing it to pop out; 2. Pull the data card downwards.
Insertion 1. Align the data card with the slot; 2. Insert the data card upwards.
Signal instructions No signal
Signal
presence
14
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
3.1 Changing the base anchors
Castor wheel removal 1. Insert the forklift under the equipment; 2. Raise the forklift to suspend the equipment; 3. Use a wrench to turn the castor wheel counterclockwise until it is fully removed.
Installing the base anchors 1. Align the screw with the thread; 2. Use a wrench to turn the base anchor clockwise until it is securely installed.
Forklift 1. Lower the forklift to set the base anchors on the ground; 2. Withdraw the forklift.
15
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
2 Common troubleshooting
1. No power
No.
Possible causes
Solution
1 Power input not connected
Correctly connect the power input cable
2
Ground fault circuit interrupter is in Check if the ground fault circuit interrupter is
the “Off” position
in the “On” position
3 Blown fuse
Please contact customer service
4 Power switch not turned on
Turn on the power switch
2. Not refrigeration
No.
Possible causes
Solution
1 Refrigeration switch not turned on Turn on the refrigeration switch
If the machine has been used for a 2 long time, the refrigerant may be Please contact customer service
insufficient
3. Unable to reach set temperature
No.
Possible causes
Solution
1 Condenser dust
Clean with a non-metallic brush
2 Insufficient cooling time for goods Pre-cooling items before selling
Due to direct sunlight or other heat
3 sources around the machine, the Change the machine placement environment
ambient temperature is too high
Ensure there is more than a 20cm gap at the
4 Poor ventilation of the machine
back and sides of the machine and that it is
well-ventilated
4. Speaker’s sound is low or no sound
No.
Possible causes
Solution
1
Volume set too low or sound turned off
Reset the volume
2 Poor audio cable connection
Reconnect the audio cable properly
3
Poor speaker or audio amplifier circuit
Please contact customer service
16
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
5. Light strip does not work
No.
Possible causes
1 Light strip plug interface is poor.
2 Light strip damaged
Solution
Reconnect the light strip connectors securely. Please contact customer service
6. Not connected to the Internet
No.
Possible causes
Solution
1 SIM card not detected
1. Check if the machine has a card inserted; 2. Check if the surface of the SIM card is dirty
Data usage has exceeded the limit,
2
especially the first update of backstage data, which consumes a
Reactivate the data card
large amount of data.
3 The card has been deactivated
Recharge the data card
4 The card is locked 5 No signal
Contact the backstage to unlock Note: The data card can only be used in the machine it is bound to. If the SIM card is repeatedly used in phones or other devices, it may get locked, and the machine may not work properly
1. Ensure the antenna is installed correctly and placed on top of the machine 2. Test with a SIM card from a different carrier
6 Unable to connect to the server
Contact the backstage to activate backstage services
Due to various reasons, there may be no
7
No mobile network signal coverage in the operational area
mobile network signal coverage in the operating area. In such cases, change the machine’s location or connect to a WiFi signal
(can be connected via an Ethernet cable).
17
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
3 Routine cleaning and maintenance
Cleaning inspection time and content
Content
Cycle Machine body
Cleaning inspection time
When replenishing goods
Once a month
Every six months
Control cabinet partition
Vending slot
Cleaning
Evaporator
Condenser
Transport channel
Check
Panel
Ground fault circuit interrupter
Set installation status
Regularly check and clean
1. When restocking, wipe the exterior of the vending machine with a dry cloth. If there are heavy stains, wipe with a damp cloth or a diluted solution of neutral detergent. Do not use organic solvents or alkaline liquids for cleaning, as these may cause the panel to crack. Do not use paint solvents or banana oil and other chemical reagents to avoid accidents (use wind essence instead).
2. When cleaning the inside of the machine cabinet, turn off the main power switch to safely clean the slots and delivery channels. Cleaning tools should only include soft cloths, cotton swabs, soft brushes, and other non-metal tools. For models with an evaporator, it should be cleaned monthly. If necessary, rinse with clean water. Remove the baffle and clean dust from the radiator gaps with cleaning tools.
3. The vending machine’s ground fault circuit interrupter should be tested monthly. Press the test button on the ground fault circuit breaker, which will automatically switch to the “Off” position. If the test is normal, turn off the switch and reconnect the power after 3 minutes.
4. If there are oil stains or foreign objects on the machine, clean them thoroughly to avoid affecting the machine’s normal operation.
Cleaning the evaporator
Unscrew the screws
Remove the cover plate and tin foil
Cleaning the condenser
Unscrew the screws
Power
Test
indicator light
Plug switch
Cooling system cleaning area
(image needs to be updated with a new model)
18
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
4 Product warranty card
Product warranty card
Warranty terms:
The warranty covers products manufactured by our company and damaged during normal use. Customers enjoy free after-sales service within the warranty period (one year, starting from the date on the purchase invoice). However, damage caused by human actions or irresistible external forces (such as earthquakes, floods, fires, lightning, etc.) is not covered under the warranty. Specific exclusions include products without a serial number or with altered serial numbers (model); products disassembled, repaired, or attempted to be repaired by unauthorized personnel; products damaged due to accidents, misuse, or any form of irresistible natural factors; and products damaged by the customer during transportation.
Maintenance record form
No.
Maintenance date Description of fault Repair personnel
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
19
www.afenvend.com www.afenvend.com www.afenvend.com
www.afenvend.com
sales@afenvending.com
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
5 Software instructions
Common functions: 1. Set target temperature 2. Set temperature control mode 3. Set temperature control timing 4. Set defogging switch for glass 5. Set LED strip switch 6. Set product channel pricing 7. Set product channel inventory 8. Set product channel capacity 9. One-touch loading operation 10. Clear product channel faults 11. Pre-loaded change coins 12. Empty the paper money change area
For software instructions content, please scan the QR code above to view and download.
20
wwww.awfewn.avfeenndv.ceonmd.cowmww.afenvend.comsalwews@wa.afefennvveennddin.cgo.cmom
www.afenvend.com
sales@afenvending.com
Vending Machine User Manual
Certificate of Quality
Inspector:
Packing List Vending Machine: 4G Antenna: Manual: Key: Fuse: WiFi Antenna: Other:
21
wwww.awfewn.avfeenndv.ceonmd.cowmww.afenvend.comsalwews@wa.afefennvveennddin.cgo.cmom
Documents / Resources
 |
AFEN AF-CSC-60C Snack and Drink Vending Machine [pdf] User Manual AF-CSC-60C H5, AB05, AF-CSC-60C Snack and Drink Vending Machine, AF-CSC-60C, Snack and Drink Vending Machine, Drink Vending Machine, Vending Machine |