Juniper-LOGO

Juniper NETWORKS Deploying Apstra Virtual Appliance on Nutanix Platform

Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform -product

Deploying the Apstra Virtual Appliance on Nutanix
This guide explains how to deploy the Apstra VM Image for Linux KVM image and install it on Nutanix.

Download the Image

  1. Download the 6.0 Apstra VM Image for Linux KVM (QCOW2) from the Software Downloads page.
  2. Select the 6.0 version from the VERSION drop-down window.
    'N Example filename for the 6.0 version is aos_server_6.0.0-189.qcow2.gz.
  3. Extract the disk image and then move it to the location where you want to install it.

Upload the Image

  1. Log into the Nutanix Prism Central console.
  2. Navigate to the Image Configuration screen, or similar screen, depending on the version of Nutanix.
    Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (2)
  3. Click Upload Image, specify the name of the image, select the image type as DISK, and then upload the qcow2 file that you extraced earlier.Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (3)

Deploy the VM

  1. In the Prism Central console, navigate to the VM section. Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (4)
  2. Click Create VM to start the wizard, and then enter the name of the VM in the Name edit box. Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (5) Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (6)Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (7)
  3. Select Legacy BIOS in the Boot Configuration section. Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (8)
  4. Specify the number of vCPU(s) and cores per vCPU, and memory details.
    Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (9)
  5. Add a NIC to the VM by clicking Add New NIC in the Network Adapters (NIC) section. Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (10)
  6. Select the available subnet name from the drop-down window. Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (11)
  7. Save the VM settings and power it on.

Juniper-NETWORKS Deploying-Apstra -Virtual-Appliance-on-Nutanix-Platform  (1)Now you can configure your Apstra server.

Juniper Networks, die Juniper Networks-logo, Juniper en Junos is geregistreerde handelsmerke van Juniper Networks, Inc. in die Verenigde State en ander lande. Alle ander handelsmerke, diensmerke, geregistreerde handelsmerke of geregistreerde diensmerke is die eiendom van hul onderskeie eienaars. Juniper Networks aanvaar geen verantwoordelikheid vir enige onakkuraathede in hierdie dokument nie. Juniper Networks behou die reg voor om hierdie publikasie sonder kennisgewing te verander, te wysig, oor te dra of andersins te hersien. Kopiereg © 2025 Juniper Networks, Inc. Alle regte voorbehou.

Dokumente / Hulpbronne

Juniper NETWORKS Deploying Apstra Virtual Appliance on Nutanix Platform [pdf] Gebruikersgids
Deploying Apstra Virtual Appliance on Nutanix, Deploying Apstra Virtual Appliance on Nutanix Platform, Apstra Virtual Appliance on Nutanix Platform, Appliance on Nutanix Platform, Nutanix Platform

Verwysings

Los 'n opmerking

Jou e-posadres sal nie gepubliseer word nie. Vereiste velde is gemerk *