AtomStack F03-0329-0AA1 Swift

Spesifikasies

• Produk Naam: AtomStack Swift
• Modelnommer: F03-0329-0AA1
• Weergawe: B
• Kragtoevoer: DC 24V
• Poorte: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
• Status aanwyser: Solid blue when working

Produkgebruiksinstruksies

Onderdele lys:

• X-as samestelling
• Left Y-axis assembly (with motor)
• Regter Y-as samestelling
• Kragadapter
• Llave fija (Fixed wrench)

Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.

How to Install Swift:

1. Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
2. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
3. If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.

Onderdele lys

Getting to Know AtomStack Swift

How to install Swift

1. Place the five assemblies as shown in the diagram.
   Let wel: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left.
2. Align and connect the five assemblies, then secure them using six M5×8 screws.
3. Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
   (Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
4. Install the laser module and tighten the thumb knob.Let wel:
   If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
5. Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.

Fokusmetode:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.

Wenk:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.

• If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
• Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
• Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.

ATOMSTACK Official Recommended Software

Mobile App Download Method：

Rekenaarsagteware aflaaimetode:
AtomStack Studio aflaai skakel: https://atomstack.com/pages/atomstack-studio-software

1. Official Download Link
   https://atomstack.com/pages/atomstack-studio-software
2. Skandeer om af te laai

Sagteware Hulpbronne

LightBurn
Unofficial software. Requires a separate purchase

Lightburn Sagteware Aflaai Metode: Aflaai skakel: https://lightburnsoftware.com/pages/download-trial

1. Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
2. Maak die LightBurn-sagteware oop, kies: Toestelle – Invoer
3. Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
   The machine will beep once to confirm the connection.

Let wel: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800

Gebruikersgids

Kontak ons

Scan the QR code for more information:

• Unboxing & First Use
• Use with the AtomStack APP
• Probleemoplossing
• Onderhoud

Kliëntediens:

• For the detailed warranty policy, please visit our official webwebwerf: www.atomstack.com
• Vir tegniese ondersteuning en diens, e-pos asseblief: support@atomstack.com

Vervaardiger:
Shenzhen AtomStack Technologies Co., Ltd.

Poskode: 518172

Adres:
17de Vloer, Gebou 3A, Fase II, Intelligent Park, No. 76, Baohelaan, Baolongstraat, Longgang-distrik, Shenzhen, Guangdong, China.

Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.

Gereelde vrae

Wat moet ek doen as ek probleme ondervind tydens installasie?

If you face any difficulties during installation, refer to the video tutorial available on the official webwebwerf of kontak kliëntediens vir bystand.

Dokumente / Hulpbronne

ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdfGebruikershandleiding F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift

Verwysings

• Gebruikershandleiding