RADIOMASTER Pocket Hall Gimbal Transmitter User Manual

1. Inleiding

This manual provides essential information for the safe and efficient operation of your RADIOMASTER Pocket Hall Gimbal Transmitter. Please read this manual thoroughly before use to ensure proper setup and functionality.

2. Veiligheidsinligting

Verwys altyd na die instruksiehandleiding voor gebruik.

• Ensure batteries are correctly installed and charged before operation.
• Operate the transmitter in a safe environment, away from obstacles and people.
• Moenie die toestel aan water of uiterste temperature blootstel nie.
• Hou buite bereik van kinders.
• Kontroleer gereeld vir enige skade of los verbindings.

3. Wat is in die boks

Nadat u die boks uitgepak het, maak seker dat alle komponente teenwoordig is:

• 1 x RADIOMASTER Pocket Radio
• 1 x Custom Carry Pouch
• 1 x USB-C-kabel
• 1 x skermbeskermer
• 1 x Plakker
• (Optional: 4 x Low Tension Springs - if included in your package)

Image: All items included in the RADIOMASTER Pocket package, including the radio, carry pouch, USB-C cable, screen protector, and sticker sheet.

4. Produk verbyview

The RADIOMASTER Pocket is a compact and lightweight remote control transmitter designed for various RC applications. It features Hall Gimbals for precise control and runs on EdgeTX firmware.

4.1 Voorkant View

Beeld: Voorkant view of the RADIOMASTER Pocket transmitter in charcoal, showing the gimbals, LCD screen, and control buttons.

Image: The RADIOMASTER Pocket transmitter showcasing its built-in LED lights, which visualize inputs and enhance visibility.

4.2 Agter View

Beeld: Agter view of the RADIOMASTER Pocket transmitter, highlighting the battery compartments and external module bay.

4.3 Sleutelkenmerke

• Hall Effect Gimbals: Provide smooth centering and precise response.
• Removable Stick Ends: For convenient storage and transport.
• Foldable Antenna: Keeps the antenna protected and out of the way when not in use.
• Verligte LCD-skerm: Offers a clear display of settings and telemetry.
• Ingeboude LED-ligte: Visualize inputs and add a stylish element.
• External Module Bay: Compatible with RadioMaster Nano-size modules and TBS Nano Crossfire/Nano Tracer.
• 18650 Battery Compatibility: Uses two 18650 batteries for extended operation (batteries not included).

Image: Visual representation of the removable stick ends, foldable antenna, and Hall Gimbal features.

Beeld: Gedetailleerd view of trim buttons, 18650 battery compartments, built-in LED lights, and the external Nano module bay.

4.4 Control Layout Diagram

Image: An annotated diagram illustrating the various buttons, switches, ports, and gimbal adjustment points on the transmitter.

• Left Gimbal: Controls throttle and yaw (Mode 2).
• Right Gimbal: Controls pitch and roll (Mode 2).
• Switches (SA, SB, SC, SD, SE, SF): Programmable 2-position and 3-position switches.
• Buttons (RTN, PAGE>, PAGE<, TELE, SYS, MDL): Navigation and system control buttons.
• Snyknoppies: For fine-tuning channel adjustments.
• USB-C-poort: Vir laai en dataverbinding.
• DSC Trainer Port: For trainer functionality.
• 3.5 mm koptelefoonaansluiting: Vir oudio-uitvoer.
• External Module Bay: For adding compatible external modules.

5. Opstelling

5.1 Battery installasie

1. Open the battery compartments on the rear of the transmitter.
2. Insert two 18650 Li-ion batteries, ensuring correct polarity.
3. Maak die batterykompartemente veilig toe.

5.2 Aanvanklike aanskakeling

1. Ensure the antenna is in the upright position.
2. Druk en hou die aan/af-knoppie in totdat die skerm verlig.
3. The transmitter will boot into the EdgeTX firmware.

5.3 Gimbal Adjustment

The gimbals can be adjusted for tension and self-centering. Refer to the diagram in Section 4.4 for adjustment screw locations.

• A (I-R): Turn clockwise to disable self-centering (throttle), counter-clockwise to enable self-centering.
• B (Throttle Tension): Turn clockwise to increase stick tension, counter-clockwise to decrease tension.
• C (Up-Down Tension): Turn clockwise to increase vertical stick tension, counter-clockwise to decrease tension.
• D (Left-Right Tension): Turn clockwise to increase horizontal stick tension, counter-clockwise to decrease tension.

6. Bedryfsinstruksies

6.1 EdgeTX Firmware

The RADIOMASTER Pocket comes pre-installed with EdgeTX firmware, offering extensive customization and functionality. For detailed instructions on navigating EdgeTX menus, model setup, and binding procedures, please refer to the official EdgeTX documentation available online.

6.2 Using the External Module Bay

The external module bay allows for compatibility with various Nano-size modules, such as TBS Nano Crossfire or Nano Tracer. To install a module:

1. Maak seker dat die sender afgeskakel is.
2. Carefully insert the Nano module into the external module bay on the rear of the transmitter.
3. Power on the transmitter and configure the module settings within EdgeTX.

6.3 Laai

Connect the included USB-C cable to the USB-C port on the transmitter and to a suitable USB power source (e.g., computer, wall adapter). The charging indicator will show the charging status.

7. Onderhoud

• Keep the transmitter clean and free from dust and debris.
• Berg in 'n koel, droë plek wanneer dit nie gebruik word nie.
• Avoid dropping or subjecting the transmitter to harsh impacts.
• Periodically check all switches and gimbals for smooth operation.
• Ensure the foldable antenna mechanism operates freely.

8. Probleemoplossing

• Transmitter does not power on:
  • Check if 18650 batteries are correctly installed and fully charged.
  • Maak seker dat die aan/uit-knoppie voldoende gedruk en gehou word.
• No signal to receiver:
  • Verify the binding procedure between the transmitter and receiver.
  • Check the external module (if used) for proper installation and configuration.
  • Ensure the antenna is fully extended.
• Gimbals or switches not responding:
  • Check settings within EdgeTX firmware.
  • Inspect for any physical obstructions or damage.
• Firmware issues (e.g., "No Drivers or Firmware" message):
  • Connect the transmitter to a computer via USB-C.
  • Visit the official RADIOMASTER or EdgeTX website for firmware update instructions and necessary drivers.
  • Follow the provided guides carefully to re-flash or update the firmware.

9. Spesifikasies

Image: Technical drawing showing the dimensions of the RADIOMASTER Pocket transmitter.

10. Amptelike Produkvideo

Kyk na hierdie amptelike video vir 'n visuele oorsigview of the RADIOMASTER Pocket Hall Gimbal Transmitter's features and design.

11. Waarborg en Ondersteuning

For warranty information, technical support, or further assistance, please visit the official RADIOMASTER webwebwerf of kontak hul kliëntediens direk. Bewaar u bewys van aankoop vir waarborgeise.

Official RADIOMASTER Store: RADIOMASTER Store on Amazon