NETVIP 300Mbps WiFi Repeater User Manual

1. Inleiding

The NETVIP 300Mbps WiFi Repeater is designed to extend the coverage of your existing wireless network, eliminating Wi-Fi dead zones and providing a strong, reliable connection throughout your home or office. This device supports both Repeater Mode for extending an existing Wi-Fi signal and AP (Access Point) Mode for creating a new Wi-Fi network from a wired connection. It is compatible with all standard Wi-Fi routers (IEEE 802.11n/g/b) and features a convenient WPS function for easy setup.

Figure 1.1: NETVIP WiFi Repeater plugged into a wall outlet, showing its compact design and indicator lights.

2. Pakketinhoud

• 1 x NETVIP WiFi Repeater
• 1 x RJ45-netwerkkabel
• 1 x Gebruikershandleiding

3. Opstelling

3.1 Fisiese installasie

Plug the NETVIP WiFi Repeater into a standard electrical outlet in the area where you want to extend your Wi-Fi coverage. Ensure the device is within range of your existing router's Wi-Fi signal for optimal performance in Repeater Mode.

Figure 3.1: The NETVIP WiFi Repeater being plugged into a wall socket, ready for operation.

3.2 WPS One-Touch Setup (Repeater Mode)

The WPS (Wi-Fi Protected Setup) function allows for a quick and easy connection to your existing router without manual configuration.

1. Plug the Repeater into a power outlet. Wait for the power indicator light to stabilize.
2. Druk die WPS-knoppie op jou gasheerrouter.
3. Within 2 minutes, press the WPS button on the NETVIP WiFi Repeater. The WPS indicator light on the repeater will flash.
4. Wait for 1-2 minutes for the connection to establish. The signal strength indicator lights on the repeater will illuminate, indicating a successful connection.

Figure 3.2: Visual guide for WPS one-touch connection, illustrating the steps to connect the repeater to your router.

3.3 Handmatige opstelling via Web Koppelvlak

If your router does not support WPS, or for advanced configuration, you can set up the repeater via its web koppelvlak.

1. Plug the Repeater into a power outlet.
2. Connect your computer or mobile device to the repeater's default Wi-Fi network (e.g., "Wireless-N" or "NETVIP_XXXX"). No password is required initially.
3. Maak oop a web blaaier en voer die standaard IP-adres in (gewoonlik 192.168.10.1) or the default web address (check the included manual for specifics, often ap.opstelling or repeater.setup).
4. Meld aan met die standaard gebruikersnaam en wagwoord (gewoonlik admin/admin).
5. Follow the on-screen wizard to select your desired mode (Repeater or AP).
6. For Repeater Mode: Select your existing Wi-Fi network from the list, enter its password, and optionally change the repeater's SSID (network name) and password.
7. For AP Mode: Connect an Ethernet cable from your main router to the repeater's RJ45 port. Then, configure a new Wi-Fi network name (SSID) and password for the repeater.
8. Save the settings and wait for the repeater to restart. Your devices can now connect to the extended or new Wi-Fi network.

Figure 3.3: Explanation of Repeater Mode (extending existing Wi-Fi) and AP Mode (creating new Wi-Fi from wired connection).

4. Bedryf die Toestel

4.1 LED-aanwysers

The repeater features several LED indicators to show its status:

• Krag LED: Indicates if the device is powered on.
• WPS LED: Flashes during WPS setup, solid when WPS connection is active.
• Wi-Fi/Signal LED: Indicates Wi-Fi activity and signal strength. Multiple lights usually mean a stronger signal.
• LAN LED: Dui aktiwiteit op die Ethernet-poort aan.

4.2 Koppel toestelle

Once the repeater is set up, you can connect your wireless devices (smartphones, tablets, laptops, smart TVs, gaming consoles, etc.) to the extended Wi-Fi network. The network name (SSID) will be either the same as your main router (if you chose to keep it) or a new one you configured during setup.

Figure 4.1: The repeater supports connection for up to 20 devices, including phones, pads, laptops, smart bulbs, smart plugs, and smart cameras.

4.3 Optimale Plasing

For best performance, place the repeater halfway between your router and the area where you need improved Wi-Fi coverage. Avoid placing it near large metal objects, concrete walls, or other electronic devices that may cause interference.

Figure 4.2: Illustration of how the repeater extends Wi-Fi coverage throughout a multi-story home, showing signal amplifikasie gebiede.

5. Onderhoud

5.1 Skoonmaak

To maintain optimal performance, periodically clean the exterior of the repeater with a soft, dry cloth. Do not use liquid cleaners or aerosols.

5.2 Herstel van die toestel

If the device is not functioning correctly or you wish to revert to factory settings, you can perform a factory reset. Locate the small "Reset" button (often recessed) on the device. Use a paperclip or a thin object to press and hold the button for approximately 5-10 seconds until the indicator lights flash, then release. The device will restart with factory default settings.

6. Probleemoplossing

7. Spesifikasies

• Handelsmerk: NETVIP
• Model: B0CTLS6ZBT
• Draadlose kommunikasiestandaard: 802.11n
• Data-oordragtempo: 300 Megabits per Second
• Frekwensieband: 2.4 GHz
• Spesiale kenmerke: WPS, AP Mode, Fast Ethernet Port (RJ45)
• Kleur: Swart
• Item gewig: 170 gram
• Afmetings: Approximately 12.6 x 9.6 x 7.4 cm (Packaging)

8. Waarborg en Ondersteuning

NETVIP products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided on the product packaging or visit the official NETVIP webwebwerf. Bewaar asseblief u bewys van aankoop vir waarborgeise.

Vir verdere hulp kan u ook die kleinhandelaar kontak waar die produk gekoop is.