MAIDeSITe Dual Motor Standing Desk User Manual

Produk verbyview

The MAIDeSITe Dual Motor Standing Desk is an electric adjustable workstation designed for home and office use. It features a robust dual-motor system for smooth height adjustments, a spacious 48 x 24 inch walnut desktop, and a 3-tier design for enhanced stability and lifting capacity. This manual provides detailed instructions for assembly, operation, and maintenance to ensure optimal performance and longevity of your desk.

Image: The MAIDeSITe Dual Motor Standing Desk in a typical office setup, showcasing its spacious walnut desktop and integrated control panel.

Opstelling en samestelling

Follow these steps carefully to assemble your MAIDeSITe Dual Motor Standing Desk. It is recommended to have two people for assembly.

Monteringsvideogids

Stap-vir-stap montage-instruksies:

1. Step 1: Split the Crossbeam. Carefully separate the two halves of the crossbeam and remove the center rails.
2. Step 2: Table Legs Assembly. Attach the side bracket column legs to the crossbeam. Secure each leg with 4 M6*12 screws. A total of 8 M6*12 screws are used for this step.
3. Step 3: Attach the Feet. Secure the feet to the bottom of each table leg. Each foot requires 4 M6*14 screws, totaling 8 M6*14 screws for both feet.
4. Step 4: Insert Beams. Place the two center rails back into the assembled table legs, ensuring they are properly aligned.
5. Step 5: Join Together. Align the assembled frame with the holes on the underside of the desktop. Secure the center rails to the crossbeams with 8 M6*14 screws. Then, secure the side brackets to the worksurface with an additional 8 M6*14 screws.
6. Step 6: Handset and Core Assembly. Insert the power plug 90 degrees vertically into the corresponding socket on the controller. Connect the motor cables and the handset cable to the controller. Secure the handset to the underside of the desktop using 2 ST5*16 screws.

Bedryfsinstruksies

Your MAIDeSITe standing desk features a digital control panel with memory presets for convenient height adjustment.

Beheerpaneel funksies:

• Op/af pyle: Press and hold to adjust the desk height up or down. Release to stop at the desired height.
• Geheue-voorinstellings (1, 2, 3, 4): To save a height, adjust the desk to your desired position, then press the 'M' button followed by the desired number (1, 2, 3, or 4). To recall a saved height, simply press the corresponding number button.

Herstel werking:

It is important to perform a reset operation before using your desk for the first time or after a power interruption to ensure proper calibration.

1. Long press the down arrow key for 5 seconds and release it.
2. Long press the down arrow key again. The display will show "RST".
3. Continue to long press the down arrow key until a numerical height appears on the display. The reset is complete.

Onderhoud

Regular maintenance helps prolong the life and performance of your standing desk.

• Skoonmaak: Gebruik 'n sagte, damp cloth to wipe down the desktop and frame. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Kabelbestuur: Periodically check and organize cables to prevent tangling and ensure smooth operation.
• Skroefdigtheid: Met verloop van tyd kan skroewe loskom. Kontroleer en draai alle monteerskroewe gereeld vas om stabiliteit te handhaaf.
• Gewig kapasiteit: Do not exceed the maximum weight capacity of the desk (276 lbs) to prevent damage to the motors and frame.

Probleemoplossing

If you encounter issues with your MAIDeSITe standing desk, refer to the common problems and solutions below.

Spesifikasies

Waarborg en Ondersteuning

For specific warranty information and customer support, please refer to the documentation included with your product or contact MAIDeSITe directly through their official website or the retailer where the product was purchased. General customer support information may be available via the retailer's platform.

Vir verdere hulp kan u die MAIDeSITe Store on Amazon.