1. Inleiding
The ANKO 20 Amp GFCI (Ground Fault Circuit Interrupter) Outlet is designed to provide enhanced electrical safety by quickly detecting and interrupting ground faults. This device is UL Listed, tamper-resistant, and weather-resistant, making it suitable for both indoor and outdoor applications. This manual provides essential information for the safe and correct installation, operation, and maintenance of your GFCI outlet.
2. Wat is in die boks
- GFCI-uitlaat 20 Amp
- Decor Wall Plate
- Monteer skroewe
- Installasie-instruksies (hierdie handleiding)
3. Sleutel kenmerke
- UL gelys: Certified for safety and performance.
- Tamper-Resistant (TR): Prevents insertion of foreign objects into the receptacle openings, enhancing child safety.
- Weather-Resistant (WR): Constructed with advanced UV stabilized engineering for superior corrosion, temperature, and UV resistance, ideal for outdoor and indoor use.
- Selftoetsfunksie: Automatically conducts an internal test every 40 seconds to confirm proper ground fault protection.
- LED-aanwyser: Provides visual feedback on power and protection status (Green for working, Red for End-of-Life).
- High-Impact Resistant Thermoplastic: Ensures durability and strength.
- Back and Side Wire Options: Offers flexible wiring connections.
Image: Key features of the ANKO GFCI Outlet, including UL listing, tamper and weather resistance, and self-test capability.
4. Veiligheidsinligting
WARNING: Risk of Electric Shock or Electrocution. Installation requires electrical knowledge. If you are unsure about any part of these instructions, consult a qualified electrician.
- Always turn off power at the circuit breaker or fuse box before installing or servicing the outlet.
- Use only copper wire. Do not use with aluminum wire.
- Maak seker dat alle draadverbindings stewig en behoorlik geïsoleer is.
- Do not install in wet locations unless protected by a weatherproof enclosure.
- A GFCI outlet is designed to protect against ground faults, not against electrical overload or short circuits.
Image: Explanation of GFCI functionality, highlighting its role in preventing serious injury by interrupting ground faults and detailing the LED indicator's meaning.
5. Installasiehandleiding
5.1. Gereedskap benodig
- Skroewedraaier (Phillips en Flathead)
- Draadstroppers
- Elektriese band (opsioneel)
- Voltage Toetser
5.2. Bedradingsinstruksies
- Skakel krag af: Vind die stroombreker of sekering wat die uitlaat wat jy vervang of installeer, beheer. Skakel dit AF. Verifieer dat die krag af is met 'n volumemeter.tage toetser.
- Identifiseer Drade: Carefully pull the existing outlet from the wall box (if replacing). Identify the LINE wires (incoming power from the breaker) and LOAD wires (outgoing power to other outlets downstream). The GFCI outlet has clearly marked LINE and LOAD terminals.
- Stroop Drade: Strip approximately 1/2 inch of insulation from the ends of the wires.
- Koppel drade:
- Connect the bare copper or green insulated GROUND wire to the GREEN grounding screw terminal.
- Connect the incoming LINE (hot/black) wire to the BRASS LINE terminal.
- Connect the incoming LINE (neutral/white) wire to the SILVER LINE terminal.
- If you have downstream outlets to protect, connect the outgoing LOAD (hot/black) wire to the BRASS LOAD terminal.
- If you have downstream outlets to protect, connect the outgoing LOAD (neutral/white) wire to the SILVER LOAD terminal.
Note: If there are no downstream outlets to protect, cap off the LOAD terminals with electrical tape or wire nuts.
- Veilige verbindings: Ensure all wires are securely fastened to their respective terminals. The ANKO GFCI supports both back-wire (inserting stripped wire into hole and tightening screw) and side-wire (wrapping wire around screw) connections.
- Monteer uitlaat: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box with the provided screws. Attach the wall plate.
Beeld: Gedetailleerd view of the GFCI outlet's terminals, indicating connections for Grounding, Line (incoming power), and Load (outgoing power to protected circuits).
Image: Visual guide for wiring the GFCI outlet, illustrating connections for both single-cable and multiple-cable setups, including protection for downstream outlets.
5.3. Initial Test
- Herstel krag: Skakel die krag weer AAN by die stroombreker of sekeringboks.
- Press RESET: The GFCI outlet should now have power. Press the RESET button. The LED indicator should turn GREEN.
- Press TEST: Press the TEST button. The GFCI should trip, and the LED indicator should turn OFF or RED.
- Press RESET Again: Press the RESET button again. The GFCI should reset, and the LED indicator should turn GREEN.
If the GFCI does not reset or the LED does not turn green, check your wiring connections and ensure the power is on. If issues persist, consult a qualified electrician.
6. Bedryfsinstruksies
6.1. TEST and RESET Buttons
- TOETS-knoppie (swart): Used to manually trip the GFCI to verify its protection function. When pressed, the GFCI should trip, cutting off power to the receptacles.
- RESET-knoppie (rooi): Used to restore power to the GFCI after it has tripped (either manually or due to a ground fault).
6.2. LED-aanwyser
- Vaste groen: The GFCI is functioning correctly and providing ground fault protection.
- Off or Red: The GFCI has tripped, or there is no power to the outlet.
- Flashing Red (End-of-Life): The GFCI has reached the end of its useful life and can no longer provide ground fault protection. It must be replaced immediately.
6.3. Self-Test Function
The ANKO GFCI outlet automatically performs a self-test every 40 seconds. During this test, the red light may blink once. This is normal operation and indicates the GFCI is continually monitoring its ability to protect against ground faults.
7. Onderhoud
- Maandelikse toetsing: It is recommended to test your GFCI outlet monthly to ensure proper operation. Follow the "Initial Test" steps outlined in Section 5.3.
- Skoonmaak: Clean the surface of the outlet and wall plate with a soft, damp lap. Moenie skuur skoonmaakmiddels of oplosmiddels gebruik nie.
- Inspeksie: Periodically inspect the outlet for any signs of damage, such as cracks, discoloration, or loose connections.
8. Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| GFCI will not reset (LED is off or red) | No power to the outlet Grondfout bespeur Onbehoorlike bedrading Einde van die Lewe | Kontroleer stroombreker/sekering Unplug all devices, press RESET. If it holds, plug devices back one by one to find faulty one. Verify LINE/LOAD connections are correct. Replace the GFCI outlet. |
| GFCI skakel gereeld af | Faulty appliance/device Moisture in circuit Oorlaaide kring | Test devices on another outlet. Discontinue use of faulty device. Ensure outlet is protected from moisture, especially in outdoor/damp liggings. Reduce the number of devices on the circuit. |
| No power to downstream outlets | GFCI het gestruikel Improper LOAD wiring GFCI not first in circuit | Press RESET button. Verify LOAD wires are correctly connected to the GFCI's LOAD terminals. Ensure the GFCI is the first outlet in the circuit to protect downstream outlets. |
9. Spesifikasies
- Modelnommer: ANKPS-301
- Gradering: 20 Amp, 125 Volt, 60 Hz
- Materiaal: High-Impact Resistant Thermoplastic (Polycarbonate - PC)
- Kleur: Wit
- Produk afmetings: 4.6 inches (L) x 2.7 inches (W) x 0.04 inches (D) (Faceplate); 4.06 inches (L) x 1.69 inches (W) (Outlet Body)
- Sertifiserings: UL Listed YGB-095WR
- Kenmerke: Tamper-Resistant (TR), Weather-Resistant (WR), LED Indicator, Self-Test
Image: Dimensional specifications of the ANKO GFCI outlet and its accompanying wall plate.
10. Waarborg en Ondersteuning
Specific warranty details for the ANKO GFCI Outlet are not provided in this manual. For warranty information, technical support, or any product-related inquiries, please contact ANKO customer service directly or refer to the product packaging and official ANKO webwebwerf.
Dit word aanbeveel om u aankoopbewys vir waarborgdoeleindes te bewaar.
