Belangrike veiligheidsinligting
Lees asseblief alle instruksies sorgvuldig deur voor installasie en gebruik. Bewaar hierdie handleiding vir toekomstige verwysing.
- Elektriese veiligheid: This mirror is an electrical appliance. Installation should be performed by a qualified electrician if hardwiring is chosen. Ensure power is disconnected at the circuit breaker before any installation or maintenance.
- Waterdigte gradering: The mirror has an IP54 waterproof rating, making it suitable for wet bathroom environments. However, avoid direct water spray onto electrical components.
- Gehard glas: The mirror is crafted with durable tempered glass. In the event of breakage, it is designed not to shatter into sharp pieces, enhancing safety.
- Montering: The mirror is designed for horizontal hanging only. Ensure the mounting surface is structurally sound to support the mirror's weight (approximately 31.7 pounds).
Pakketinhoud
Verifieer dat alle komponente teenwoordig en onbeskadig is tydens uitpak:
- BYECOLD Smart Bathroom Mirror
- Mounting Hardware (screws, anchors, Z-brackets)
- Full-size Installation Template
- Gebruikershandleiding
Opstelling en installasie
1. Monteer die spieël
The BYECOLD Smart Bathroom Mirror is designed for horizontal wall mounting. Use the provided full-size template to mark drilling locations accurately.
Figure 1: Mirror Dimensions (47"L x 23.6"W)
Figure 2: Installation Methods (Plug-in or Hardwired)
2. Elektriese aansluiting
There are two primary methods for connecting power to your mirror:
- Inprop: Connect the mirror's standard three-prong plug into a suitable wall outlet.
- Gehard: For a seamless appearance, the plug can be cut off, and the mirror's wires can be directly connected to your wall switch's wiring. This method should only be performed by a professional electrician.
For visual guidance on installation, please refer to the following video:
Video 1: Installasie en Funksie Oorview (Source: MAVISEVER)
Video 2: Smart Mirror Features and Bathroom Integration (Source: youryoke)
Bedryfsinstruksies
1. Power and Lighting Control
The mirror features a smart touch button on its surface for various functions:
- Enkelklik: Activates or deactivates the built-in LED lights.
- Verstelbare beligting: Toggle between two color temperatures (3000K Warm Light / 6000K Daylight) by adjusting the button located at the back of the mirror.
Figure 3: Touch Sensor Controls
Figure 4: Two Color Temperature Switchable (3000K Warm Light and 6000K Daylight)
2. Smart Features (Weather Display & Anti-Fog)
- Weervertoning: Double-click the smart touch button to display real-time weather updates, forecasts, time, date, and indoor temperature via the WiseMirror App.
- Anti-mis funksie: A long press of the smart touch button activates the defogging feature. This function ensures a clear view and is energy-efficient, typically defogging the mirror completely within 5-10 minutes. It automatically shuts off after two hours.
Figuur 5: oorview of Smart Features
Figure 6: Smart Wi-Fi Connection Display Details
Figure 7: Heated Defogging Function
Wi-Fi konneksie
Connecting to the WiseMirror App
To utilize the smart features, connect your mirror to the WiseMirror App. The mirror only supports a 2.4GHz Wi-Fi network. Ensure your router is configured to provide a 2.4GHz signal or that your device is connected to the 2.4GHz band during setup.
- Download the WiseMirror App from your device's app store (available for Android and iOS).
- Follow the in-app instructions to pair your smart mirror.
- Ensure your smartphone is connected to a 2.4GHz Wi-Fi network during the pairing process.
Figure 8: WiseMirror App Connection
Onderhoud
To ensure the longevity and optimal performance of your BYECOLD Smart Bathroom Mirror, follow these maintenance guidelines:
- Maak die spieëloppervlak skoon: Gebruik 'n sagte, pluisvrye lap en 'n nie-skurende glasskoonmaker. Spuit die skoonmaker op die lap, nie direk op die spieël nie, om te verhoed dat vloeistof in die elektriese komponente insypel.
- Maak die raam skoon: If applicable, wipe the frame with a soft, damp lap. Vermy harde chemikalieë wat die afwerking kan beskadig.
- Elektriese komponente: Do not attempt to clean or repair internal electrical components. If issues arise, refer to the Troubleshooting section or contact customer service.
- LED-strokies: The LED strips are designed for durability. Avoid excessive pressure or impact on the lighted areas.
Probleemoplossing
If you encounter any issues with your BYECOLD Smart Bathroom Mirror, please consult the following common troubleshooting steps:
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Spieëlligte skakel nie aan nie. | No power, loose connection, faulty touch sensor. | Check power supply. Ensure the mirror is properly plugged in or hardwired. Try a single click on the touch sensor. |
| Weather display not working or inaccurate. | Wi-Fi connectivity issues, incorrect app settings, 5GHz network connection. | Ensure your Wi-Fi is 2.4GHz. Reconnect the mirror to the WiseMirror App. Verify app settings and location services. |
| Anti-fog function not clearing the entire mirror. | Ontwerpbeperking. | The defogging area is typically a central portion of the mirror, not the entire surface. This is normal operation. |
| Indoor temperature reading is inaccurate. | Sensor proximity to LED lights. | The sensor may be affected by heat from the LED lights. This can cause readings to be higher than the actual room temperature when the lights are on. |
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Handelsmerk | BYECOLD |
| Model | BYECOLD 48x24 Smart Bathroom Mirror |
| Afmetings | 47"L x 23.6"B |
| Montage tipe | Wall Mount (Horizontal Hang Only) |
| Raammateriaal | Raamloos |
| Materiaal | Aluminium, Gehard Glas |
| Spesiale kenmerke | Fogless, Lighted, Touch Sensor, Wi-Fi Enabled Weather Forecast |
| Beligting | LED Backlit, Adjustable Color Temperature (3000K / 6000K) |
| Waterdigte gradering | IP54 |
| Wi-Fi-versoenbaarheid | Slegs 2.4GHz netwerk |
| Item gewig | 31.7 pond |
Waarborg en Kliëntediens
BYECOLD is committed to providing high-quality products and excellent customer support.
- 30-Day Replacement Guarantee: If your product is defective within 30 days of purchase, it is eligible for a free replacement.
- 45-dae geld-terug-waarborg: If you are not satisfied with your purchase within 45 days, you may return it for a full refund.
- 2-Year Repair Warranty: The mirror is covered by a 2-year warranty for repairs against manufacturing defects.
- 24-uur kliëntediens: For any assistance, inquiries, or warranty claims, please do not hesitate to contact our customer service team.
Contact information can typically be found on the product packaging or the official BYECOLD webwebwerf.
