Inleiding
This manual provides essential information for the proper use and care of your Draper 01095 Magnetic Parts Tray. Designed for efficiency and organization, this tray helps prevent the loss of small ferrous metal parts during various tasks.
The Draper 01095 Magnetic Parts Tray is constructed from high-grade stainless steel and features two strong magnets embedded in its base. These magnets securely hold small metal components such as screws, nuts, bolts, and washers, ensuring they remain in place even if the tray is accidentally knocked or placed on an uneven surface. Its robust construction makes it suitable for use in workshops, garages, and for various DIY projects.
This image displays the Draper 01095 Magnetic Parts Tray. It is a rectangular tray made of polished stainless steel, designed to hold small metal components. The interior of the tray features two circular indentations, indicating the location of the strong magnets embedded in the base, which securely hold ferrous parts in place.
Opstelling
The Draper 01095 Magnetic Parts Tray requires no assembly. It is ready for immediate use upon removal from its packaging.
- Uitpak: Carefully remove the magnetic parts tray from its packaging. Inspect the tray for any signs of damage during transit.
- Plasing: Place the tray on a stable, flat surface where you will be working. The magnetic base allows it to adhere to ferrous metal surfaces, such as toolboxes, engine blocks, or metal workbenches, providing additional stability and preventing accidental spills.
Bedryf
Using the Draper 01095 Magnetic Parts Tray is straightforward:
- Collecting Parts: As you disassemble items or work with small components, place all ferrous metal parts (e.g., screws, nuts, washers, small tools) directly into the tray. The strong magnets in the base will hold them securely.
- Preventing Loss: The magnetic retention ensures that parts do not roll away, get lost, or fall into hard-to-reach areas, significantly improving organization and efficiency during tasks.
- Veelsydigheid: The tray can be used horizontally on a workbench or vertically on a metal surface, depending on your needs, without fear of parts falling out.
Onderhoud
Proper maintenance will ensure the longevity and continued effectiveness of your magnetic parts tray:
- Skoonmaak: Vee die skinkbord skoon met adamp cloth after each use to remove dirt, grease, or metal shavings. For stubborn grime, a mild soap solution can be used. Ensure the tray is thoroughly dried immediately after cleaning to prevent water spots or corrosion.
- Droog: Always dry the tray completely before storage to prevent rust, especially in humid environments.
- Berging: Store the tray in a dry place away from corrosive chemicals or extreme temperatures.
- Vermy harde chemikalieë: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the stainless steel finish.
Probleemoplossing
Most issues with the magnetic parts tray are minor and easily resolved:
- Parts Not Sticking:
- Ensure the parts you are trying to hold are made of ferrous metal (e.g., steel, iron). Non-ferrous metals (e.g., aluminum, brass, copper) will not be attracted by the magnets.
- Check if there is excessive dirt, grease, or debris on the tray's surface or the parts themselves, which might reduce magnetic adhesion. Clean the tray as per the maintenance instructions.
- Tray Sliding on Surface:
- Ensure the surface the tray is placed on is clean, flat, and made of a suitable ferrous metal.
- Verify that the magnets on the base of the tray are intact and not obstructed.
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Vervaardiger | Draper |
| Deelnommer | 01095 |
| Modelnommer | 1095 |
| Materiaal | Vlekvrye staal |
| Magnete | 2 strong magnets in base |
| Item gewig | 1.11 pond |
| Aantal stukke | 1 |
Waarborg inligting
Specific warranty details for the Draper 01095 Magnetic Parts Tray are not provided in this manual. Please refer to the product packaging or the official Draper Tools webwebwerf vir die mees onlangse waarborginligting.
Ondersteuning
For further assistance or inquiries regarding your Draper 01095 Magnetic Parts Tray, please contact Draper Tools customer support through their official website or the contact information provided on the product packaging. This manual does not contain direct support contact details.
