Produk verbyview
The ANKO 200 Lumen COB Emergency LED Night Light is a versatile, cordless, and portable lighting solution designed for various applications. It features COB (Chip-on-Board) LED technology for bright, efficient illumination and offers multiple mounting options including magnetic attachment and adhesive stickers. This light is ideal for use in wardrobes, camping, kitchens, garages, attics, and for night reading, providing reliable light during power outages or in areas without direct power access.
Sleutel kenmerke
- 200 Lumen COB LED: Provides bright and wide illumination.
- Koordloos en draagbaar: Battery-operated for flexible placement and easy transport.
- Veelvuldige montage-opsies: Includes strong magnets for metal surfaces and adhesive stickers for other flat surfaces.
- Eenvoudige skakelaarwerking: Easy to turn on and off.
- Duursame ontwerp: Suitable for various indoor environments.
Veiligheidsinligting
- Moenie die toestel aan uiterste temperature of direkte sonlig blootstel nie.
- Moenie die toestel in water of ander vloeistowwe dompel nie.
- Gebruik slegs die gespesifiseerde batterytipe en verseker die korrekte polariteit tydens installasie.
- Hou buite bereik van kinders.
- Moenie probeer om die toestel uitmekaar te haal of te wysig nie. Dit sal die waarborg ongeldig maak.
- Verwyder batterye as die toestel nie vir 'n lang tydperk gebruik gaan word om lekkasie te voorkom.
Pakketinhoud
- 1 x ANKO 200 Lumen COB Emergency LED Night Light
- Adhesive Stickers (pre-attached or separate, depending on model variant)
- Gebruikershandleiding (hierdie dokument)
- Let wel: Batterye is gewoonlik nie ingesluit nie en moet afsonderlik aangekoop word.
Opstelling
Battery installasie
- Locate the battery compartment cover on the back of the light.
- Skuif of knip die deksel los om die kompartement oop te maak.
- Insert the required number of AAA batteries (typically 3x AAA, check device markings) according to the polarity indicators (+/-) inside the compartment.
- Maak die batterykompartement se deksel stewig toe.
Monteer Opsies
The ANKO LED Night Light offers two primary mounting methods:
Magnetiese montering
- The light has built-in magnets on its back.
- Simply attach the light to any ferrous metal surface, such as a refrigerator, metal cabinet, or tool chest.
- Ensure the surface is clean and dry for optimal magnetic adhesion.
Adhesive Sticker Mounting
- If using the adhesive stickers, ensure the desired mounting surface is clean, dry, and smooth.
- Peel off the protective backing from the adhesive sticker(s) on the back of the light.
- Press the light firmly onto the chosen surface for at least 30 seconds.
- Allow the adhesive to set for a few hours (e.g., 24 hours) before applying significant pressure or repositioning.
Bedryfsinstruksies
Skakel aan/af
The ANKO LED Night Light is operated by a simple toggle switch, typically located on the side or front of the unit.
- Om die lig aan te skakel ON, slide the switch to the "ON" position.
- Om die lig aan te skakel AF, slide the switch to the "OFF" position.
Gebruik Scenario's
- Wardrobes/Closets: Mount inside for easy visibility of clothes and items.
- Kitchen Cabinets: Provide extra light under cabinets or inside pantries.
- Garages/Attics: Illuminate dark corners or work areas where wired lighting is unavailable.
- Camping/Outdoor (sheltered): Use as a portable light source in tents or temporary shelters.
- Noodbeligting: Keep readily available for power outages.
- Night Reading: Attach to a headboard or nearby surface for focused light.
Onderhoud
Skoonmaak
- Wipe the exterior of the light with a soft, dry cloth.
- Moenie skuurmiddels, oplosmiddels of harde chemikalieë gebruik nie, aangesien dit die oppervlak kan beskadig.
- Ensure the light is off and batteries are removed before cleaning.
Battery vervanging
When the light dims or stops functioning, it is time to replace the batteries.
- Skakel die lig AF.
- Open the battery compartment as described in the "Battery Installation" section.
- Verwyder die ou batterye en gooi dit weg volgens plaaslike regulasies.
- Insert new AAA batteries, ensuring correct polarity.
- Maak die batterykompartement stewig toe.
Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Lig skakel nie aan nie. | Batterye is leeg of verkeerd geïnstalleer. | Vervang batterye met nuwes, en verseker die korrekte polariteit. |
| Lig is dof. | Batterye is laag. | Vervang batterye. |
| Lig val van die monteringsoppervlak af. | Surface is not clean, smooth, or suitable for adhesive/magnet. | Clean the surface thoroughly. For adhesive, ensure it's smooth and allow setting time. For magnetic, ensure it's a strong ferrous metal. |
| Switch feels loose or unresponsive. | Probleem met interne meganisme. | Contact customer support. Do not attempt to repair. |
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Model | B079MDCYM7 |
| Ligbron | COB LED |
| Lumen Uitset | 200 Lumen |
| Kragbron | Battery (e.g., 3x AAA, not included) |
| Monteer Opsies | Magnetic, Adhesive Sticker |
| Afmetings | (Specific dimensions not provided in input, placeholder) |
| Gewig | (Specific weight not provided in input, placeholder) |
Waarborg en Ondersteuning
ANKO products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official ANKO webwebwerf. Bewaar u aankoopbewys as bewys van aankoop.
If you encounter any issues or have questions regarding your ANKO LED Night Light, please contact our customer support team:
- E-pos: support@anko.com (Bvample email, actual contact info may vary)
- Telefoon: 1-800-XXX-XXXX (Bvample phone, actual contact info may vary)
- Webwebwerf: www.anko.com (Bvample website, actual contact info may vary)
Please have your model number (B079MDCYM7) and purchase date ready when contacting support.
Important Notes on Media
Produkbeelde: No useful product images were provided in the source data. The image link provided was a "No image available" placeholder. Therefore, no product images could be embedded in this manual.
Produkvideo's: No official product videos from the seller were found in the provided data. Therefore, no videos could be embedded in this manual.
