EMG SA Active Single Coil Guitar Pickup Set (Red) Instruction Manual

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your EMG SA Active Single Coil Guitar Pickup Set. The EMG SA pickups are designed to deliver a classic single-coil tone with enhanced midrange response and higher output, while eliminating unwanted noise.

Key features of the EMG SA Set include:

• Active Circuitry: Provides high output and low noise performance.
• Alnico V Bar Magnets: Contributes to bell-like harmonics, increased sustain, and a rich bottom end.
• Internal Shielding and Low Impedance Preamp: Ensures virtually noiseless operation without compromising true single-coil tone.
• Creamy Mid-Range Warmth: Ideal for clear, strong, and expressive blues tones.

2. Opstelling en installering

Proper installation is crucial for optimal performance. The EMG SA Set typically utilizes a solderless wiring system for ease of installation. Refer to the included wiring diagram for specific connections.

2.1. Gereedskap benodig

• Klein Phillips-skroewedraaier
• Wire cutters/strippers (if not using solderless connections exclusively)
• Soldering iron and solder (if modifying existing wiring or not using solderless connections)
• Multimeter (opsioneel, vir die kontrolering van verbindings)
• 9-volt battery

2.2. Voorinstallasiekontrole

Before beginning, ensure all components of your EMG SA Set are present and undamaged. This typically includes the three SA pickups, potentiometers, output jack, battery clip, and various connection cables.

Prentbeskrywing: A collection of EMG active pickup wiring components, including potentiometers, an output jack, a battery clip, various color-coded cables with connectors, and a 5-way switch. These components facilitate a solderless installation for EMG active pickups.

2.3. Mounting the Pickups

1. Carefully remove the existing pickups from your guitar.
2. Place the EMG SA pickups into the pickup routes on your guitar's pickguard or body.
3. Secure the pickups using the provided screws, adjusting the height as desired. Initial height can be set to approximately 1/8 inch (3mm) from the strings when fretted at the last fret.

Prentbeskrywing: Three red EMG SA active single coil guitar pickups are shown from an angled top-down perspective. Each pickup has the 'EMG' logo embossed on its cover. They are designed for electric guitars, offering a distinct aesthetic and active sound.

2.4. Bedradingsverbindings

The EMG SA Set uses a solderless wiring system. Connect the pickups to the potentiometers, output jack, and battery clip according to the provided wiring diagram. Ensure all connections are secure and properly seated.

• Connect the pickup output cables to the input terminals on the volume potentiometer.
• Connect the tone potentiometers to the volume potentiometer and output jack as indicated.
• Connect the battery clip to the designated power input on the wiring harness.
• Ensure the output jack is correctly wired for stereo operation, as active pickups require power from the ring terminal.

2.5. Battery Installasie

Active pickups require a 9-volt battery for operation. Install a fresh 9-volt battery into the battery clip. Secure the battery within the guitar's control cavity, ensuring it does not short against other components.

2.6. Aanvanklike toetsing

After installation, plug your guitar into an amplifier. Test each pickup position and adjust volume and tone controls to ensure proper functionality. Listen for any unwanted noise or signal dropouts.

3. Operating Your EMG SA Pickups

The EMG SA pickups are designed for straightforward operation. Once installed and powered, they provide a consistent, high-fidelity signal.

• Volume- en toonkontroles: Use your guitar's standard volume and tone potentiometers to shape your sound. Active pickups often provide a wider range of usable tone control.
• Pickup Selector: Utilize your guitar's pickup selector switch to choose between individual pickups or combinations, exploring the various tonal characteristics of the SA set.
• Kragverbruik: The pickups draw power from the 9-volt battery only when a cable is plugged into the output jack. Unplug your guitar when not in use to conserve battery life.

4. Onderhoud

Regular maintenance ensures the longevity and optimal performance of your EMG SA pickups.

• Skoonmaak: Wipe the pickup covers with a soft, dry cloth to remove dust and grime. Avoid using abrasive cleaners or solvents.
• Battery vervanging: The 9-volt battery typically lasts for hundreds of hours of playing time. Replace the battery when you notice a decrease in output, loss of clarity, or distortion. Always use a fresh, high-quality alkaline 9-volt battery.
• Verbindingskontrole: Periodically inspect all solderless connections to ensure they are secure. If you used soldered connections, check for any cold solder joints.
• Optelhoogteverstelling: Experiment with pickup height to fine-tune your tone and output. Raising the pickups increases output and bass response, while lowering them reduces output and can enhance clarity.

5. Probleemoplossing

If you encounter issues with your EMG SA pickups, consult the following troubleshooting guide:

5.1. No Sound or Weak Output

• Gaan battery na: The most common cause. Replace with a fresh 9-volt battery.
• Kontroleer kabel: Ensure your guitar cable is fully inserted into the output jack and is functioning correctly.
• Verifieer verbindings: Re-check all solderless connections for proper seating. If soldered, inspect for loose wires or cold solder joints.
• Uitgangskabel: Ensure the output jack is correctly wired and not faulty.

5.2. Unwanted Noise or Hum

EMG active pickups are designed to be virtually noiseless. If you experience noise:

• Eksterne inmenging: Move away from sources of electromagnetic interference (e.g., computer monitors, fluorescent lights, power transformers).
• Grondkwessies: While active pickups are less susceptible to traditional grounding hum, ensure all components are properly grounded according to the wiring diagram.
• Faulty Cable/Amplewendiger: Test with a different guitar cable and ampverligter om eksterne toerustingprobleme uit te sluit.

5.3. Poor or Inconsistent Tone

• Batteryvlak: A low battery can affect tone and dynamics. Replace the battery.
• Pickup Height: Adjust pickup height to find the optimal balance of output and tone.
• Ampverligter instellings: Verseker jou amplifier's EQ and gain settings are appropriate for the desired tone.
• String Condition: Old or corroded strings can significantly impact tone.

6. Spesifikasies

7. Waarborg en Ondersteuning

For warranty information and technical support, please refer to the documentation included with your product or visit the official EMG webwebwerf. Jy kan ook bykomende hulpbronne en kontakbesonderhede vind by die EMG Store on Amazon.