PROSTORMER PTHT3038

Contents

PROSTORMER 2000W Electric Thermal Weeder Instruction Manual

Model: PTHT3038

1. Introduction

Thank you for purchasing the PROSTORMER 2000W Electric Thermal Weeder. This device is designed for efficient and environmentally friendly weed removal using high-temperature hot air, and can also be used for lighting charcoal. Please read this manual carefully before use to ensure safe and optimal operation.

PROSTORMER Electric Thermal Weeder with various uses shown
Figure 1: Product Overview
The PROSTORMER Electric Thermal Weeder is a versatile tool for weed control and charcoal ignition.

2. Safety Instructions

  • Always wear appropriate personal protective equipment, including safety glasses and gloves.
  • Ensure the power supply matches the device's specifications (230V/50Hz).
  • Do not touch the nozzle or grid outlet during or immediately after use, as they will be extremely hot.
  • Keep children and pets away from the working area.
  • Do not use the weeder near flammable materials or liquids.
  • Ensure adequate ventilation when operating indoors or in enclosed spaces.
  • Never point the hot air stream at people, animals, or delicate plants.
  • Unplug the device when not in use and before cleaning or maintenance.
  • Store the device in a cool, dry place, out of reach of children.
  • This device produces high heat; exercise extreme caution to prevent burns or fires.

3. Product Components and Diagram

Familiarize yourself with the parts of your PROSTORMER Electric Thermal Weeder:

Diagram of PROSTORMER Electric Thermal Weeder components with labels
Figure 2: Weeder Components Overview
This diagram illustrates the main parts of the thermal weeder, including the curved handle, aluminum arm rod, lock bar button, temperature and flow control gear, high temperature protection, ventilation slots, nozzle, and grid outlet.
  • Curved Handle: Ergonomically designed for comfortable grip.
  • Aluminum Arm Rod: Extends the reach of the weeder.
  • Lock Bar Button: Secures the arm rod in position.
  • Temperature and Flow Control Gear: Adjusts heat and airflow settings.
  • High Temperature Protection: Safety feature to prevent overheating.
  • Ventilation Slots: For air intake and heat dissipation.
  • Nozzle: Directs the hot air stream. Two types are included: a cone nozzle for general weeding and a flat nozzle for charcoal lighting.
  • Grid Outlet: The opening from which hot air is expelled.

4. Setup

  1. Assembly: If the handle and arm rod are detached for storage, connect them securely to the main unit. Ensure the lock bar button engages properly to prevent accidental detachment during use.
  2. Nozzle Attachment: Select the appropriate nozzle for your task.
    • For weed removal: Use the cone-shaped nozzle.
    • For charcoal lighting: Use the flat nozzle.
    Attach the chosen nozzle firmly to the grid outlet.
  3. Power Connection: Plug the weeder into a standard 230V/50Hz electrical outlet.

5. Operating Instructions

5.1. Weed Removal

The electric thermal weeder effectively destroys weeds by applying intense heat, causing the plant cells to burst and the weed to wither and die without chemicals.

Electric Thermal Weeder destroying weeds by heating on dry grass
Figure 3: Weed Removal in Action
The weeder uses hot air to destroy weeds, typically within 5 seconds, without the need for chemicals.
Electric Thermal Weeder removing weeds between paving stones
Figure 4: Weeding on Paved Surfaces
Effectively removes weeds from cracks and crevices in paving stones.
  1. Ensure the cone nozzle is attached.
  2. Turn on the device using the power switch. Allow a few moments for the device to reach its operating temperature (up to 650℃).
  3. Position the nozzle directly over the weed, holding it close to the plant for optimal heat transfer.
  4. Apply heat for approximately 5 seconds. You will observe the weed wilting or changing color, indicating that its cell structure has been damaged.
  5. Move to the next weed. For larger or more stubborn weeds, a slightly longer application may be necessary.
  6. After use, turn off the device and allow it to cool completely before storing.

5.2. Charcoal Lighting

The flat nozzle can be used to quickly and safely light charcoal for barbecues or other purposes.

Electric Thermal Weeder lighting charcoal in a grill
Figure 5: Charcoal Lighting
The flat nozzle is ideal for igniting charcoal quickly and efficiently.
  1. Ensure the flat nozzle is attached.
  2. Arrange charcoal in your grill or fire pit.
  3. Turn on the device and allow it to heat up.
  4. Direct the hot air stream from the flat nozzle onto the charcoal.
  5. Hold the nozzle in place until the charcoal begins to glow and ignite. Move the nozzle around to ensure even lighting.
  6. Once the charcoal is lit, turn off the device and allow it to cool before storing.

6. Maintenance and Storage

  • Cleaning: After each use, ensure the device is unplugged and completely cool. Wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the device in water.
  • Nozzle Care: Clean any debris from the nozzles. Ensure the grid outlet is clear of obstructions.
  • Storage: The weeder features a detachable handle for compact storage. Disassemble the handle and arm rod if desired. Store the device and its accessories in a dry, safe place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

Problem Possible Cause Solution
Device does not turn on. No power supply; faulty outlet; damaged power cord. Check power connection and outlet. Inspect power cord for damage. If damaged, do not use and contact support.
Insufficient heat output. Incorrect temperature setting; blocked ventilation slots. Ensure temperature control is set to maximum. Check and clear ventilation slots.
Device overheats and shuts off. Blocked ventilation; prolonged continuous use. Ensure ventilation slots are clear. Allow the device to cool down before resuming use.

8. Specifications

Attribute Value
Brand Name PROSTORMER (also listed as UwinVwin)
Model Number PTHT3038
Power Type AC Current
Power Source Electricity
Voltage/Frequency 230V/50Hz
Power Consumption 2000W
Minimum Temperature 60℃ (550L/min airflow)
Maximum Temperature 650℃ (550L/min airflow)
Feature Anti-Slip Handle
Cutting Type Filament (refers to the method of weed destruction, not a physical cutting filament)
Certification CE, EMC, GS
Battery Included No
High-concerned chemical None
Origin Mainland China

9. User Tips

  • For best results on weeds, apply heat until the leaves visibly wilt or change color. This indicates the cell walls have ruptured. The weed may not immediately turn brown but will die within a few days.
  • When lighting charcoal, ensure the flat nozzle is positioned close to the charcoal for quicker ignition.
  • Take short breaks during extended use to allow the device to cool slightly and prevent potential overheating.

10. Warranty and Support

This product is covered by a standard manufacturer's warranty. For warranty claims, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.