ANDELI Cold Welding Mask

Contents

ANDELI Cold Welding Mask Instruction Manual

Model: Cold Welding Mask

Brand: ANDELI

1. Product Overview

The ANDELI Cold Welding Mask is designed to provide protection and enhanced visibility during cold welding operations, specifically compatible with ANDELI TIG-250GPLC and TIG-250GPA cold welding machines. This mask features an auto-darkening filter and integrated LED lights to improve visibility in various working conditions.

ANDELI Cold Welding Mask front view

Figure 1: Front view of the ANDELI Cold Welding Mask.

2. Setup and Connection

This product is designed for straightforward setup and does not typically require complex installation or professional expertise. Ensure all components are present and undamaged before proceeding.

2.1 Components

  • Cold Welding Mask with integrated auto-darkening filter and LED lights
  • Connection cable
  • Headgear assembly

2.2 Attaching the Headgear

If not pre-assembled, attach the headgear to the welding mask. Ensure it is securely fastened and adjustable for a comfortable and stable fit on your head.

Interior view of the mask showing the headgear and filter assembly

Figure 2: Interior view of the mask with adjustable headgear.

2.3 Connecting to Welding Machine

The Cold Welding Mask is designed to connect directly to compatible ANDELI cold welding machines, specifically models TIG-250GPLC and TIG-250GPA. Locate the designated port on your welding machine and connect the mask's cable securely. The mask draws power and synchronizes with the welding machine for its auto-darkening function and LED lights.

Cold welding mask connected to a welding machine

Figure 3: Cold Welding Mask connected to a compatible welding machine.

3. Operating Instructions

Once connected to a compatible welding machine, the mask is ready for use. The auto-darkening filter will automatically adjust to protect your eyes from intense light during welding, and the integrated LED lights provide additional illumination for the workpiece.

3.1 Auto-Darkening Function

The mask's primary function is to protect your eyes. The auto-darkening filter will sense the arc strike and darken almost instantaneously to a pre-set shade level, returning to a lighter shade when the welding process stops. This allows for continuous visibility without needing to lift the mask.

3.2 LED Illumination

The mask is equipped with LED lights to enhance visibility of the workpiece, especially in dimly lit environments. These lights are powered via the connection to the welding machine.

Close-up front view of the mask's auto-darkening filter and LED lights

Figure 4: Close-up of the mask's auto-darkening filter and LED lights.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your welding mask.

  • Cleaning the Filter: Gently wipe the auto-darkening filter and outer lens with a soft, clean cloth. Avoid abrasive materials or harsh chemicals that could scratch or damage the surface.
  • Cleaning the Mask Body: The PP helmet material can be cleaned with a damp cloth and mild soap. Rinse thoroughly and dry completely before storage.
  • Cable Inspection: Regularly check the connection cable for any signs of wear, cuts, or damage. Replace if necessary to ensure proper function and safety.
  • Storage: Store the mask in a dry, clean environment away from direct sunlight, extreme temperatures, and corrosive substances.

5. Troubleshooting

5.1 LEDs Barely Light Up

Some users have reported that the integrated LED lights provide low illumination. While the seller indicates brightness may depend on the welding machine, this has been a consistent observation. Ensure the mask is correctly connected to a compatible ANDELI TIG-250GPLC or TIG-250GPA machine. If the issue persists, consider using external lighting if additional illumination is critical for your work.

5.2 Mask Not Darkening

If the auto-darkening filter fails to darken upon arc strike:

  1. Check the cable connection to the welding machine to ensure it is secure.
  2. Verify that the welding machine is powered on and functioning correctly.
  3. Inspect the sensors on the mask for any obstructions or dirt. Clean gently if necessary.
  4. If the issue persists, contact customer service.

6. Specifications

FeatureSpecification
Helmet MaterialPP (Polypropylene)
CompatibilityANDELI TIG-250GPLC, TIG-250GPA Cold Welding Machines
OriginMainland China
CertificationNONE
Package Weight1.0 kg
Package Dimensions (L x W x H)25 cm x 25 cm x 30 cm

7. User Tips

  • Inspect Upon Arrival: Although products are packaged for protection, always inspect the mask and its components immediately upon receipt for any signs of damage during transit.
  • Check Material and Fit: Ensure the mask's material meets your expectations and that the headgear provides a comfortable and secure fit for prolonged use.
  • LED Brightness: Be aware that the integrated LED lights may offer limited illumination. If bright task lighting is crucial, plan for supplementary external light sources.
  • Compatibility Confirmation: This mask is specifically designed for ANDELI TIG-250GPLC and TIG-250GPA cold welding machines. Confirm compatibility with your equipment before use.

8. Warranty and Support

For detailed information regarding warranty terms and conditions, please refer to the official product documentation or contact the seller directly. If you encounter any issues or have questions that are not addressed in this manual, please consult customer service for assistance.

An additional user manual in PDF format is available for download: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.