1. Product Overview
This MEKEDE special cable is an optional accessory designed to facilitate the connection of an Android car multimedia system to the existing wiring harness of various vehicle models. It ensures proper power supply, audio signal transmission, and control integration for a seamless in-car entertainment experience. Please ensure you select the correct cable variant for your specific car model and multimedia unit.

2. Setup and Installation
Before beginning installation, ensure your vehicle's ignition is off and the battery is disconnected to prevent electrical damage. This cable is intended for use with Android car multimedia systems featuring a 16-pin port.
2.1 Compatibility Check
It is crucial to verify that your car multimedia unit has the compatible 16-pin interface. Using an incorrect cable or interface may lead to malfunction or damage.

2.2 General Installation Steps
- Identify Vehicle Harness: Locate the existing wiring harness in your vehicle's dashboard where the car multimedia unit will be installed.
- Match Connectors: Connect the vehicle-specific end of the MEKEDE special cable to your car's wiring harness. Ensure a secure and snug fit.
- Connect to Multimedia Unit: Plug the 16-pin connector of the special cable into the corresponding 16-pin port on the back of your Android car multimedia unit.
- Auxiliary Connections: Connect any additional wires for specific functions such as steering wheel controls, reverse camera, or external amplifiers, referring to the wiring diagram (Figure 3) and your car's specific wiring instructions.
- Secure Wiring: Route and secure all cables to prevent pinching or interference.
- Reconnect Battery: Once all connections are made and secured, reconnect your vehicle's battery.
- Test Functionality: Turn on the ignition and test all functions of the multimedia unit (power, audio, radio, steering wheel controls, etc.).
2.3 Wiring Diagram (P1 Connector)
The following diagram illustrates the pin assignments for the P1 connector, commonly found on MEKEDE special cables. This is essential for understanding the function of each wire and for troubleshooting.

| Pin | Function |
|---|---|
| A1 | GND (Ground) |
| A2 | B+ (Battery Positive) |
| A3 | ACC Key Switch |
| A4 | ILL small lights detecting |
| A5 | Reverse detecting line |
| A6 | Steering wheel control study -2 |
| A7 | Steering wheel control study -1 |
| A8 | ANT power (Antenna Power) |
| A9 | Speaker Front Right FR+ |
| A10 | Speaker Rear Left RL- |
| A11 | Speaker Front Right FR- |
| A12 | Speaker Rear Left RL+ |
| A13 | Speaker Front Left FL- |
| A14 | Speaker Rear Right RR+ |
| A15 | Speaker Front Left FL+ |
| A16 | Speaker Rear Right RR- |
3. Operating Instructions
As an accessory cable, this product does not have operational controls. Its function is to provide the necessary electrical and signal connections between your car's wiring system and the Android multimedia unit. Once correctly installed, the cable enables the multimedia unit to function as intended by receiving power, audio signals, and control inputs from the vehicle.
Ensure all connections are firm and free from strain to maintain consistent performance.
4. Maintenance
These special cables are designed for durability and require minimal maintenance. Follow these guidelines to ensure longevity:
- Keep Dry: Avoid exposing the cables and connectors to moisture or liquids.
- Avoid Physical Stress: Do not bend, crimp, or pull the cables excessively. Ensure they are routed without sharp turns or pressure points.
- Regular Inspection: Periodically check visible parts of the cable for any signs of wear, fraying, or damage. If damage is found, replace the cable immediately to prevent electrical issues.
- Clean Connections: If disconnecting and reconnecting, ensure the connector pins are clean and free of dust or debris.
5. Troubleshooting
If you encounter issues after installing the special cable, consider the following troubleshooting steps:
- No Power to Multimedia Unit:
- Verify that the special cable is correctly connected to both the car's power harness and the multimedia unit's 16-pin port.
- Check the vehicle's fuses related to the car stereo system.
- Ensure the car battery is properly reconnected and charged.
- No Sound:
- Confirm that all speaker wires (FL+, FL-, FR+, FR-, RL+, RL-, RR+, RR-) are correctly connected according to the P1 wiring diagram (Figure 3).
- Check the multimedia unit's audio settings.
- Steering Wheel Controls Not Working:
- Ensure the 'Steering wheel control study -1' and 'Steering wheel control study -2' wires (A7, A6) are correctly connected and configured in the multimedia unit's settings.
- Reverse Camera Not Activating:
- Check the connection of the 'Reverse detecting line' (A5) to the vehicle's reverse signal.
- Intermittent Connection:
- Inspect all connections for looseness or corrosion.
- Ensure the cable is not pinched or damaged.
6. Specifications
| Feature | Detail |
|---|---|
| Brand Name | MEKEDE |
| Item Type | Optional accessories Special cable car multimedia |
| Interface | USB (for compatible head units) |
| Voltage | 12 V |
| Item Weight | 0.08 kg |
| Special Features | Support Can-Bus (for compatible head units) |
| Certification | CE |
| Material | Good quality materials |
| Origin | Mainland China |
| Package Dimensions (approx.) | Length: 5 cm, Width: 5 cm, Height: 5 cm |
7. Warranty and Support
7.1 Warranty Information
This MEKEDE special cable comes with a 3-month limited warranty for defective items from the date of receipt. This warranty does not cover items damaged or misused after receipt. Defective items must be reported and returned within the warranty period, preferably in their original packaging, along with your order number and a description of the defect. Items with an expired warranty will not be repaired or replaced.
7.2 Customer Support
For any questions or support needs, please contact MEKEDE AUTO Official Store directly. Provide your order details and a clear description of your issue for prompt assistance.
8. User Tips
- Double-Check Compatibility: Always confirm that the specific cable variant you purchase is compatible with both your car's model year and your Android multimedia head unit's connector type (especially the 16-pin port).
- Professional Installation Recommended: If you are unsure about car wiring, consider professional installation to avoid damage to your vehicle or the multimedia system.
- Organize Wires: Use cable ties or electrical tape to neatly bundle and secure wires behind the dashboard, preventing rattles and ensuring a clean installation.