1. Introduction
Thank you for choosing the ISDT PD60 Smart Balance Charger. This compact and efficient charger is designed for a variety of RC battery types, providing reliable and balanced charging for your remote control vehicles and drones. Please read this manual thoroughly before use to ensure safe and optimal operation.
2. Safety Information
- Always use the charger in a well-ventilated area, away from flammable materials.
- Never leave the charger unattended while in use.
- Ensure the correct battery type and charging parameters (voltage, current) are selected before charging. Incorrect settings can damage batteries or cause fire.
- Do not charge damaged or swollen batteries.
- Keep the charger away from moisture, heat, and direct sunlight.
- This product is not a toy. Keep out of reach of children. Recommended age for use is 14+ years.
3. Package Contents
- ISDT PD60 Smart Balance Charger
- XT60-F to XT30-M Adapter Cable (may vary by package)

4. Product Overview
The ISDT PD60 features a compact design with intuitive controls and clear indicators for easy operation.

Components:
- Battery Type Indicators: Lipo, LiHV, LiFe, NiMH/Cd.
- Current Selection Buttons: 1A, 2A, 3A, 6A.
- Battery Level Indicators: 20%, 40%, 60%, 80%, 100%.
- Warning Indicator: Alerts to potential issues.
- Balance Port (2S-4S): For connecting battery balance leads.
- XT30 Output: Main power output connector (1-17.4V).
- Type-C Input Port: For power input (5-20V, 3.0A).


5. Specifications
| Feature | Specification |
|---|---|
| Model Number | PD60 |
| Input Voltage | 5-20V (Type-C) |
| Max Input Power | 60W |
| Max Input Current | 3.0A |
| Output Voltage | 1-17.4V |
| Charge Current | 1A / 2A / 3A / 6A (Selectable) |
| Battery Types Supported | Lipo, LiHV, LiFe, NiMH/Cd |
| Balance Cells | 2S-4S |
| Dimensions | 56 x 85 x 21mm |
| Weight | 81.3g |
| Material | Composite Material |
| Recommended Age | 14+ years |
6. Setup
- Power Connection: Connect a compatible Type-C power source (e.g., a USB PD 2.0/3.0 or Quick Charge 2.0/3.0 adapter) to the Type-C input port on the charger. The charger will power on.
- Battery Connection:
- Connect the main power lead of your battery (e.g., XT30) to the XT30 output port on the charger.
- Connect the balance lead of your battery to the appropriate 2S-4S balance port. Ensure the balance lead is inserted correctly according to the cell count of your battery.
7. Operating Instructions
- Select Battery Type: Press the 'Type' button (or corresponding button) to cycle through the battery types (Lipo, LiHV, LiFe, NiMH/Cd) until the correct type for your battery is illuminated.
- Select Charge Current: Press the 'Current' button (or corresponding button) to select the desired charging current (1A, 2A, 3A, 6A). Always refer to your battery's specifications for the recommended charging current.
- Start Charging: Once the battery type and charge current are correctly selected, the charger will automatically begin charging. The battery level indicators will show the charging progress.
- Charging Complete: The charger will stop automatically when the battery is fully charged. Disconnect the battery from the charger.
8. Maintenance
- Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Store the charger in a cool, dry place when not in use.
- Regularly inspect cables and connectors for any signs of wear or damage. Replace if necessary.
9. Troubleshooting
- Charger not powering on: Ensure the Type-C power source is connected correctly and provides sufficient power (5-20V, 3.0A). Try a different power adapter or cable.
- Battery not charging: Check that the battery's main power lead and balance lead are securely connected. Verify that the correct battery type and current are selected. Ensure the battery is not severely over-discharged or damaged.
- Warning indicator illuminated: Disconnect the battery and power source immediately. Check for any short circuits, incorrect connections, or battery faults. Consult the manual for specific warning codes if available (not detailed in current information).
10. User Tips
- For optimal battery life, avoid charging at the maximum current if your battery's specifications recommend a lower rate (e.g., 1C charge rate).
- Always balance charge your LiPo/LiHV/LiFe batteries to ensure cell voltage consistency and safety. The PD60 is a balance charger, so ensure the balance lead is always connected.
- Consider using a power bank with USB PD output for portable charging in the field.
11. Frequently Asked Questions (FAQ)
- Q: Is it possible to charge only with the balancer port?
- A: No, for proper and safe charging, both the main power lead (XT30) and the balance lead (2S-4S port) of the battery must be connected to the charger. The balance port is crucial for monitoring individual cell voltages and ensuring balanced charging, while the main lead provides the primary charging current.
12. Warranty and Support
For warranty claims, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your proof of purchase for any warranty-related requests.