1. Product Overview
This manual provides instructions for the REWARD Men Quartz Watch, Model RD81009M. This timepiece combines a sophisticated design with practical features, including a chronograph, 24-hour display, and luminous hands.
Figure 1: REWARD Men Quartz Watch (Example: Gold/Green variant)
Video 1: Product Overview and Design Highlights
2. Components and Functions
Familiarize yourself with the watch's components and their functions:
Figure 2: Watch Function Diagram
- Crown (Middle Button): Used for setting time and date.
- Start/Pause Button (Top Right): Activates and pauses the chronograph.
- Reset Button (Bottom Right): Resets the chronograph.
- Minute Dial: Displays elapsed minutes for the chronograph.
- 24-Hour Dial: Indicates the time in a 24-hour format.
- Seconds Dial: Displays elapsed seconds for the chronograph.
- Calendar Window: Shows the current date.
- Luminous Hands: Glow in the dark for visibility in low light conditions.
- Bezel: Rotatable ring around the watch face, often used for timing or tracking.
Figure 3: Luminous Hands for easy reading in the dark
3. Setup Instructions
3.1 Setting the Time
- Pull the crown (middle button) out to the second click position.
- Rotate the crown to adjust the hour and minute hands to the correct time.
- Push the crown back in to the normal position.
3.2 Setting the Date
- Pull the crown (middle button) out to the first click position.
- Rotate the crown clockwise or counter-clockwise (depending on the movement) to set the correct date in the calendar window.
- Push the crown back in to the normal position.
- Note: Avoid setting the date between 9 PM and 3 AM, as this may interfere with the automatic date change mechanism.
4. Operating Instructions
4.1 Using the Chronograph Function
- To start the chronograph, press the Start/Pause button (top right). The seconds, minutes, and 24-hour dials will begin to move.
- To pause the chronograph, press the Start/Pause button again.
- To resume timing, press the Start/Pause button once more.
- To reset the chronograph, ensure it is paused, then press the Reset button (bottom right). All chronograph hands will return to their zero positions.
4.2 Reading the 24-Hour Dial
The small dial typically located at the 3 o'clock position indicates the time in a 24-hour format, helping to distinguish between AM and PM.
5. Maintenance
5.1 Water Resistance Guide
Your REWARD watch has a water resistance rating of 3 ATM (3 Bar), meaning it is resistant to splashes and brief immersion in water. It is not suitable for swimming, showering, or diving.
Figure 4: Watch Water Resistance Guide
5.2 General Care
- Clean the watch regularly with a soft, dry cloth to remove dust and dirt.
- Avoid exposing the watch to extreme temperatures, direct sunlight for prolonged periods, or strong magnetic fields.
- Do not expose the watch to harsh chemicals, solvents, or detergents, as these can damage the case, strap, or seals.
- If the watch comes into contact with saltwater, rinse it gently with fresh water and dry thoroughly.
- Replace the battery approximately every 2 years to ensure accurate timekeeping. It is recommended to have this done by a professional watch repair service.
6. Troubleshooting
- Watch not running: Check if the crown is pushed in completely. If it is, the battery may need replacement.
- Date not changing: Ensure the time is set correctly, especially the AM/PM cycle. Avoid setting the date between 9 PM and 3 AM.
- Chronograph hands not resetting to zero: If the chronograph hands do not return to their zero position after pressing the reset button, consult a professional watch repair service.
- Condensation inside the watch: This indicates a loss of water resistance. Avoid further contact with water and seek professional repair immediately.
7. Specifications
| Feature | Specification |
|---|---|
| Brand Name | REWARD |
| Model Number | RD81009M |
| Movement | Quartz |
| Item Type | Quartz Wristwatches |
| Case Material | Alloy |
| Case Size | 44 mm |
| Case Thickness | 12 mm |
| Case Shape | Round |
| Band Material Type | Stainless Steel |
| Band Length | 220 mm |
| Band Width | 24 mm |
| Clasp Type | Push Button Hidden Clasp |
| Dial Window Material Type | Hardlex (Curved) |
| Display Type | Analog, Arabic Numeral Markers |
| Features | Auto Date, Chronograph, Luminous Hands |
| Water Resistance Depth | 3 Bar (30 meters / 3 ATM) |
| Watch Weight | 136 g |
| Battery Included | Yes |
| Battery Life | Approx. 2 Years |
| Origin | Mainland China |
| Certifications | CE, FCC, RoHS |
8. User Tips
- Regular Cleaning: Wipe your watch regularly with a soft, lint-free cloth to maintain its appearance.
- Avoid Impacts: While durable, avoid dropping your watch or subjecting it to strong impacts to prevent damage to the movement or crystal.
- Professional Service: For battery replacement or any internal repairs, it is always best to consult a professional watchmaker to ensure proper sealing and function.
- Strap Adjustment: If the stainless steel strap needs adjustment, it is recommended to have it done by a jeweler to avoid scratching the watch or damaging the links.
9. Warranty and Support
Your REWARD watch is designed for durability and precision. For any issues not covered in the troubleshooting section, please contact the seller or an authorized service center.
Keep your purchase records for any warranty claims. The watch is certified with CE, FCC, and RoHS standards.