PaiPaitek PC 558V / PC 558

Contents

Paipaitek Automatic Anti-Meowing Cat Collar User Manual

Models: PC 558V, PC 558

1. Product Overview

The Paipaitek Automatic Anti-Meowing Cat Collar is designed to help train cats to reduce excessive meowing through humane and effective methods. It features sound, vibration, and in some models, static shock, to gently remind your cat to moderate their vocalizations. The collar is rechargeable, waterproof, and suitable for various cat breeds.

Key Features:

  • Humane Training Modes: Utilizes sound, vibration, or a combination of both. Model PC 558 also includes an optional static shock.
  • Adjustable Sensitivity: 5 levels of sensitivity to detect meowing.
  • Automatic Operation: Activates automatically upon detecting meowing, no remote control needed for the PC 558V/PC 558 models.
  • Rechargeable Battery: Long-lasting lithium polymer battery.
  • Waterproof Design: IPX5 (PC 558) or IP67 (PC 558V) rated for durability.
  • Reflective Collar: Adjustable nylon collar with reflective elements for visibility.
  • Compact and Lightweight: Device weighs approximately 1oz (28g) with dimensions of 2.3in (L) x 1.3in (W) x 1in (H).

2. Package Contents

Please check the package to ensure all items are present:

  • Nylon Collar
  • Anti-Meowing Device (Collar Receiver)
  • USB Charging Cable
  • Test Light
  • Conductive Silicone Caps
  • Contact Points (short and long)
  • User Manual
  • Anti-Abrasion Buckle (for some models)
Package Contents of Paipaitek Anti-Meowing Collar
Figure 2.1: Package Contents

3. Setup

3.1 Charging the Device

  1. Connect the USB charging cable to the charging port on the device.
  2. Plug the other end of the USB cable into a power adapter, power bank, or computer USB port.
  3. The device typically charges fully in approximately 3 hours.
  4. A full charge can provide up to 45 days of standby time (PC 558V) or 15-60 days of use depending on the model and usage frequency.
Device size and 45-day battery life indication
Figure 3.1: Device dimensions and battery life

3.2 Attaching Contact Points and Silicone Caps

  1. Select the appropriate length of contact points (short or long) based on your cat's fur length. The contact points should make good contact with the skin.
  2. Screw the chosen contact points onto the device.
  3. Place the conductive silicone caps over the contact points for added comfort and to prevent irritation.
Collar device with contact points and silicone covers
Figure 3.2: Device with contact points and silicone caps

3.3 Fitting the Collar

  1. Thread the nylon collar through the loops on the device.
  2. Place the collar around your cat's neck, ensuring the device is positioned centrally on the throat.
  3. Adjust the collar snugly, but not too tight. You should be able to fit two fingers comfortably between the collar and your cat's neck.
  4. Ensure the contact points are touching your cat's skin. If the fur is too thick, you may need to trim a small area to ensure proper contact.
  5. The collar length is adjustable from 8 to 23 inches (20-58 cm).
Cat collar fit and adjustability
Figure 3.3: Proper collar fit

4. Operating Instructions

The Paipaitek Automatic Anti-Meowing Cat Collar is designed to operate automatically once configured.

4.1 Working Principle

The collar recognizes meowing sounds from your cat. Upon detection, it emits a warning beep or vibration (and static shock for PC 558) to remind the cat. Through repeated training, your cat will associate excessive meowing with the corrective stimulus and learn to reduce it.

4.2 Sound Mode Selection (for PC 558V / PC 558)

This setting adjusts the collar's sensitivity to the duration of your cat's meowing. Press the 'S' button on the left side of the device to cycle through modes:

  • Sound Mode 1: For short meows (approx. 0.6-1 second duration).
  • Sound Mode 2: For long meows (approx. 0.8-2 seconds duration).
Sound Mode 1 and 2 settings for cat meowing duration
Figure 4.1: Sound Mode Settings

4.3 Function Mode Selection (for PC 558V / PC 558)

This setting determines the type of corrective stimulus. Press the button on the right side of the device to switch between modes:

  • Function Mode 1 (PC 558V): Vibration only.
  • Function Mode 2 (PC 558V): Sound + Vibration.
  • Function Mode (PC 558): Beep + Vibration or Beep + Vibration + Static Shock.
Function Mode 1 (Vibration) and 2 (Sound + Vibration) settings
Figure 4.2: Function Mode Settings (PC 558V example)

4.4 Automatic Protection Function

To ensure your cat's safety and prevent over-correction, the collar has an automatic protection feature:

  • If the device activates 5 times within a 30-second period, it will automatically stop working for 1 minute.
  • During this 1-minute protection period, the device will not respond to meowing.
  • After 1 minute, the device will resume normal operation.

4.5 Security Features

The collar incorporates features to prevent false triggers:

  • Meowing will not trigger the device if there is significant ambient noise.
  • Occasional, brief meows may not trigger the device.
  • Meowing detected from half a meter (approximately 20 inches) or further away will not trigger the device.

5. Maintenance

5.1 Cleaning

  • Regularly inspect the device and collar for dirt or debris.
  • Wipe the device with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
  • The nylon collar can be hand-washed with mild soap and water. Ensure it is completely dry before reattaching the device.
  • Clean the contact points periodically to ensure good conductivity.

5.2 Waterproofing

The device is designed to be water-resistant:

  • PC 558: IPX5 waterproof rating (protected against low-pressure water jets from any direction).
  • PC 558V: IP67 waterproof rating (protected from immersion in water up to 1 meter for 30 minutes).

While waterproof, it is recommended to avoid prolonged submersion and ensure the charging port is dry before charging.

IP67 Waterproof feature of the collar device
Figure 5.1: IP67 Waterproofing

6. Troubleshooting

If the collar is not functioning as expected, please refer to the following common issues and solutions:

ProblemPossible CauseSolution
Collar does not respond to meowing.
  • Incorrect sensitivity setting.
  • Loose fit, contact points not touching skin.
  • Low battery.
  • Excessive ambient noise.
  • Cat meowing too far from the device.
  • Device in automatic protection mode.
  • Adjust sensitivity levels (5 levels available).
  • Ensure collar is snug and contact points touch skin. Trim fur if necessary.
  • Charge the device fully.
  • Test in a quieter environment.
  • Ensure the cat is within close proximity (less than 0.5m) to the device when meowing.
  • Wait 1 minute for the device to exit protection mode.
Collar triggers too frequently or for non-meowing sounds.
  • Sensitivity set too high.
  • External vibrations or loud noises.
  • Lower the sensitivity setting.
  • Ensure the cat is not in an overly noisy environment.
Cat shows signs of discomfort or skin irritation.
  • Collar too tight.
  • Contact points rubbing.
  • Prolonged wear.
  • Loosen the collar slightly.
  • Ensure silicone caps are properly installed.
  • Do not leave the collar on for more than 12 hours a day. Reposition the collar daily.
Battery drains quickly.
  • Frequent activation.
  • Aging battery.
  • Reduce meowing frequency through training.
  • Ensure full charge. If battery life significantly degrades, contact support.

7. Specifications

FeaturePC 558VPC 558
ModelPC 558VPC 558
MaterialABS+PC
RechargeableYes
Waterproof LevelIP67IPX5
Function ModesBeep+Vibration, VibrationBeep+Vibration or Beep+Vibration+Static Shock
Adjustable Sensitivity5 Levels
Collar TypeAdjustable Reflective Nylon CollarAdjustable Blue Reflective Nylon Collar
Collar Length8-23 inches (20-58 cm)
Battery CompositionLithium Polymer
Battery Life (Device)Up to 45 daysUp to 60 days (2 hours charge)
Product CertificationsCE, ROHS, FCC
Device WeightApprox. 1 oz (28g)
Device Dimensions (L x W x H)Approx. 2.3in x 1.3in x 1in (5.8cm x 3.3cm x 2.5cm)

8. User Tips

  • Proper Fit is Crucial: Ensure the collar is snug enough for the contact points to consistently touch your cat's skin. A loose collar is a common reason for the device not activating.
  • Test Sensitivity: Experiment with different sensitivity levels to find the optimal setting for your cat's meowing volume and environment. Start with a lower setting and gradually increase if needed.
  • Observe and Adjust: Pay attention to how your cat responds to the collar. If the device is not triggering, check the fit and sensitivity. If it's over-triggering, lower the sensitivity.
  • Short Training Sessions: Introduce the collar gradually. Do not leave it on for extended periods initially.
  • Positive Reinforcement: Combine collar use with positive reinforcement when your cat is quiet or exhibits desired behavior.

9. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly through your purchase platform. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.