1. Introduction
The Jikong Active Balance BMS (Battery Management System) is an intelligent protection board designed for large-capacity series lithium battery packs. Developed by Chengdu Jikong Technology Co., Ltd., a high-tech enterprise specializing in lithium battery management systems, this BMS integrates advanced active balancing, wireless communication, functional safety, and capacity management technologies.
It provides comprehensive protection against overcharge, over-discharge, overcurrent, short circuit, and over-temperature, ensuring safer and more efficient battery operation. The system utilizes proprietary energy transfer active balancing technology to maintain battery consistency, improve battery range, and extend battery life.
2. Product Features
- Bidirectional Lossless Active Balancing: Improves battery efficiency by up to 95% through continuous energy transfer between cells.
- Wide Battery Compatibility: Supports Li-ion, LiFePO4, LTO, lithium cobaltate, and lithium manganate battery packs.
- Comprehensive Protection: Includes overcharge, over-discharge, overcurrent, short circuit, over-temperature, and drop-out protection.
- High-Precision Monitoring: Single cell battery voltage collection range of 1V-5V with an accuracy of ±3mV (some models ±5mV).
- Bluetooth Communication: Standard feature with a mobile APP (Android, iOS, HarmonyOS compatible) for real-time monitoring and parameter adjustment.
- Optional Communication Interfaces: Supports GPS, RS485, and CAN communication modules for advanced integration.
- Optional Display Screens: Compatible with various LCD displays (2.5-inch round, 2.5-inch flat, 3.2-inch, 4.3-inch) for visual battery status.
- High-Precision Coulomb Meter: Accurately calculates remaining battery charge and discharge based on current over time.
- System Stability: Independent watchdog design ensures real-time monitoring and prevents system crashes.

Figure 1: English APP Interface for Monitoring and Control
Video 1: Demonstration of the Jikong BMS APP in action, showing real-time data and control.

Figure 2: Active Balance Principle - Energy transfer between cells during charge and discharge.
3. Specifications
The Jikong Active Balance BMS is available in various models to suit different battery configurations and current requirements. Below is a general overview of common specifications. For detailed specifications of specific models (e.g., JK-BD6A20S-10P, JK-B2A24S-30P, etc.), please refer to the official PDF manual.
| Feature | Specification |
|---|---|
| Battery Range | 4S to 24S (model dependent) |
| Working Voltage Range | 7.5V-100V DC (model dependent) |
| Balanced Current | 0.4A, 0.6A, 1A, 2A (model dependent) |
| Continuous Discharge Current | 40A to 300A (model dependent) |
| Maximum Discharge Current | 60A to 600A (model dependent) |
| Overcurrent Protection | Adjustable, 10A to 300A (model dependent) |
| Individual Voltage Range | 1V-5V |
| Voltage Acquisition Accuracy | ±3mV to ±5mV |
| Operating Temperature | -30°C to 70°C |
| Communication | Bluetooth (standard), RS485/CAN/GPS (optional) |
| Display Interface | Support for various LCD displays (optional) |

Figure 3: Example of BMS Model Specifications
4. Installation & Wiring
Proper installation and wiring are crucial for the safe and effective operation of your BMS. Always ensure power is disconnected before making any connections.
4.1 General Wiring Principles
- Connect the main power cables (P-, B-, C-) according to the labels on the BMS board.
- Connect the balance wires (B1-, B1+, B2+, etc.) to each cell of your battery pack in the correct sequence.
- Ensure all connections are secure and free from short circuits.
- Connect temperature sensors to the designated ports on the BMS.
4.2 Wiring Diagrams
Refer to the following diagrams for specific battery configurations. These diagrams illustrate the connection of balance wires, main power cables, and temperature sensors.










4.3 Optional Module Connections
The BMS board features dedicated ports for optional modules such as RS485/CAN, GPS, and LCD displays. Ensure correct polarity and pin assignments when connecting these modules.

Figure 14: BMS Board Ports (Top View)

Figure 15: BMS Board Ports (Bottom View)
5. Operation
5.1 Bluetooth APP
The Jikong BMS features a mobile application for Android, iOS, and HarmonyOS devices. This app allows you to:
- View real-time battery status: voltage, current, temperature, and individual cell voltages.
- Monitor active balancing status.
- Adjust working parameters of the protection board.
- Control charge and discharge switches.
5.2 LCD Display (Optional)
If an optional LCD display is connected, you can monitor key battery parameters directly on the screen, including total voltage, current, state of charge (SOC), temperature, and individual cell voltages.



6. Maintenance
The Jikong Active Balance BMS is designed for low maintenance. The active balancing feature continuously works to keep cells in harmony, reducing the need for manual intervention.
- Regularly monitor battery parameters via the mobile APP or LCD display to ensure optimal performance.
- Ensure all wiring connections remain secure and free from corrosion.
- Keep the BMS board clean and free from dust and moisture.
7. Troubleshooting
- App Connectivity Issues: If the mobile app fails to connect (e.g., on MIUI phones), ensure Bluetooth is enabled and check your phone's privacy or app permissions. Try connecting with a different device if the issue persists.
- Bluetooth Password Reset: If you forget your Bluetooth password, please contact customer support for assistance.
- CAN/RS485 Communication: For inverter communication, ensure you have purchased the correct optional CAN or RS485 module and that it is properly connected and configured. Contact support if you need specific inverter compatibility information.
- BMS Not Turning On: Some BMS models may not have a physical on/off switch. They typically activate when a charging voltage of 5V or more above the current battery voltage is applied.
- Wiring Errors: Some models feature balancing wire resistance detection to help identify incorrect wiring. Always double-check your wiring against the provided diagrams.
8. User Tips
- Model Selection: Carefully check the specifications for each BMS version before placing an order to ensure it matches your battery pack's requirements (e.g., cell count, current rating).
- Compatibility: Note that a 4S to 8S BMS can also work with 3S Li-ion batteries. Similarly, 8S-17S, 8S-20S, and 8S-24S versions can work with 7S Li-ion batteries.
- Optional Features: If you require specific functions like CAN communication or GPS, ensure you explicitly order the corresponding modules and contact the seller for confirmation.
- LCD Display: Many users find the optional LCD display very useful for quickly checking battery status without needing the app.
- Reliability: The Jikong BMS is generally considered a reliable product by users, with many repeat purchases.
9. Optional Accessories
Enhance the functionality of your Jikong BMS with various optional accessories:
- Communication Modules: RS485 module, GPS module, Wi-Fi Module, USB-RS485-RJ45, RS485 conversion module, USB-TTL communication box, G102-4G Square, GPS module 4G handle.
- Display Screens: 2.5-inch LCD (round/flat), 3.2-inch LCD, 4.3-inch LCD, 7.0-inch LCD.
- Control Components: Illuminated switch button.
- Cables: 5A Balancer Cable, 15A Balancer Cable, Balancing wire.
- Other: Supercapacitor Module, 5A Parallel module, Alarm apparatus.

Figure 19: Overview of Jikong BMS Products and Accessories






10. Warranty & Support
For detailed guides, documents, and specific model information, please refer to the official PDF user manual available for download. If you have specific requirements for CAN or GPS functionality, or encounter any issues not covered in this manual, please contact the seller directly for support and customized solutions.
PDF Manual Reference: A comprehensive user manual in PDF format is available for download. This document contains detailed technical specifications, wiring diagrams, and troubleshooting steps for all models. View User Manual (PDF)