NEXPEAK A203

Contents

NEXPEAK A203 OBD2 On-board Computer User Manual

Model: A203 | Brand: NEXPEAK

1. Introduction

The NEXPEAK A203 OBD mini car trip computer is a compact and powerful instrument designed to enhance your driving experience. It is particularly suitable for vehicles that lack a built-in tachometer, engine temperature gauge, or fuel consumption display functions. The A203 provides real-time monitoring of various vehicle parameters, offering convenience and improved safety for car owners.

This product is a car OBD multi-function instrument with a stylish and compact shape. It is designed for installation through the plug and play OBD port without cutting the wire, making it easy and simple to install.

2. Product Overview

2.1. Key Features

  • Digital Display: Shows speed, water temperature, instantaneous fuel consumption, and hour fuel consumption.
  • Performance Testing: Includes vehicle acceleration and brake performance tests.
  • OBD2 Engine Diagnostic Functions: Provides data flow display, customizable display colors, fault code scanning, and fault code clearance.
  • Early Warning Function: Features water temperature warning, over-speed warning, shifting reminding, and vehicle fault early alarms for safer driving.
  • Fault Code Clearing: Allows car owners to scan and clear regular vehicle fault codes, reducing repair costs.

2.2. Package Contents

The NEXPEAK A203 package includes:

  • A203 Host Unit
  • OBD Data Cable
  • 3M Double-sided Adhesive (2 spare stickers)
  • Quick Installation Guide / User Manual
  • Certificate of Approval
NEXPEAK A203 package contents including the device, OBD cable, and adhesive pads.

Figure 2.2.1: NEXPEAK A203 Package Contents

2.3. Product Appearance

Front view of the NEXPEAK A203 OBD2 On-board Computer displaying speed, temperature, and voltage.

Figure 2.3.1: Front View of A203 Display

Side view of the NEXPEAK A203 showing dimensions: 77mm (3.03in) length, 55mm (2.17in) height, 20mm (0.79in) width.

Figure 2.3.2: A203 Dimensions

A203 display showing various functions: Coolant temperature, Engine Speed, Battery Voltage, Digital Speed, Fuel consumption, Brakes Test, Failure Diagnosis.

Figure 2.3.3: A203 Display Functions

2.4. Product Hardware

The A203 features a 32-bit ARM CORTEX-M3 CPU with 72MHz maximum operating frequency, supporting multiple high-speed automotive communication protocols.

3. Setup and Installation

3.1. Locating the OBD-II Port

Most vehicles have their OBD-II diagnostic port located under the dashboard, usually near the steering wheel (positions A or B). A small number of cars may have it in other locations (C, D, or E).

Diagram showing common OBD-II port locations in a car: A and B are under the dashboard near the steering wheel, C, D, and E are other less common locations.

Figure 3.1.1: Common OBD-II Port Locations

3.2. Connecting the Device

  1. Insert the OBD data cable into the OBD-II diagnostic port of your vehicle.
  2. Connect the other end of the cable to the mini USB port on the back of the A203 host unit.
  3. Once connected, the A203 will power on and display the NEXPEAK logo, followed by a "Connecting..." message.

Video 3.2.1: Demonstration of connecting the A203 device to a car's OBD-II port and initial power-up sequence.

3.3. Mounting the Device

The A203 can be placed directly on the dashboard or other suitable surfaces using the provided 3M double-sided adhesive. Ensure the surface is clean and dry before applying the adhesive for optimal adhesion.

NEXPEAK A203 mounted on a car dashboard, showing its compact size and clear display.

Figure 3.3.1: A203 Mounted on Dashboard

NEXPEAK A203 mounted on a car dashboard, showing its compact size and clear display.

Figure 3.3.2: A203 Mounted on Dashboard

NEXPEAK A203 mounted on a car dashboard, showing its compact size and clear display.

Figure 3.3.3: A203 Mounted on Dashboard

4. Operating Instructions

The A203 features a function key with three directions: left, right, and press down. This key is used for navigation and selection within the device's menus.

4.1. Main Display Modes

After successful connection, the A203 will display real-time vehicle data. You can scroll left or right using the function key to switch between different display modes:

  • Speed (Km/h or Mph): Displays current vehicle speed.
  • RPM: Displays engine revolutions per minute.
  • Fuel Consumption (L-avg/100Km): Shows average fuel consumption.
  • Distance (Km): Displays trip distance.
  • Engine Coolant Temperature (°C or °F): Shows engine coolant temperature.
  • Battery Voltage (V): Displays vehicle battery voltage.
A203 display showing various data streams including DTCS STATUS, FREEZE DTCS, ENGINE LOAD, FUELTRIM, TACHO, AIRTEMPERATURE, BATTERYVOLTAGE, TRIP DISTANCE, SPEED, IGNITION, MAF RATE, THROTTLE POS, OXYGENSEN, FUEL CONSUMPTION, ENGINE RUNTIME, MIL DISTANCE, FRP REF MANIFO, FUEL LEVEL, WARM-UP COUNT, DISTANCE(DTCS), BAROMETRIC PRE.

Figure 4.1.1: A203 Displaying Data Streams

Four different display screens of the A203 showing speed, distance, temperature, and voltage, along with brake test and speedup test results.

Figure 4.1.2: A203 Plug-in and Display Modes

4.2. Menu Navigation

Long press the function key to enter the main menu. Use the function key to navigate:

  • Scroll Left/Right: To move between menu options.
  • Press Down: To select an option.
  • Long Press: To exit the current menu or return to the previous one.
A203 display showing the main menu with options: OBD diagnose, Driving test, Settings, Meter config, Product inf.

Figure 4.2.1: A203 Main Menu

4.3. OBD Diagnose

From the main menu, select "OBD diagnose" to access diagnostic functions:

  • Scan DTCs: Scans for Diagnostic Trouble Codes.
  • Erase DTCs: Clears detected fault codes.
  • Data Stream: Displays real-time vehicle data streams.
A203 display showing the OBD diagnose menu with options: Scan DTCs, Erase DTCs, Data Stream.

Figure 4.3.1: OBD Diagnose Menu

4.4. Driving Test

From the main menu, select "Driving test" to perform performance tests:

  • SpeedMax Set: Set a target speed for acceleration tests.
  • SpeedUp Test: Measures vehicle acceleration performance.
  • BrakeSpd Set: Set an initial braking speed for brake tests.
  • Brake Test: Measures braking distance and time.
A203 display showing the Driving test menu with options: SpeedMax Set, SpeedUp Test, BrakeSpd Set, Brake Test.

Figure 4.4.1: Driving Test Menu

5. Settings

From the main menu, select "Settings" to configure various parameters:

  • Engine Size: Set the engine displacement size for accurate fuel consumption calculations.
  • Fuel Type: Choose between petrol, diesel, or diesel 2.
  • OverSpeedSet: Set a speed limit for an audible and visual alarm.
  • CoolantAlarm: Set a high engine temperature threshold for an alarm.
  • Shift RPM: Set an RPM for shift reminding.
  • Shift MaxKPH: Set a speed limit to disable shift reminding.
  • SleepTimeSet: Configure the automatic sleep time after the car is turned off.
  • KPH Adjust %: Adjust the displayed speed to match the car's speedometer.
  • VLT Adjust %: Correct the displayed battery voltage.
  • LowVLT Alarm: Set a low voltage threshold for an alarm.
  • Digit Cor: Choose from seven display colors.
  • KPH Zero Set: Configure the speed display to show zero when below a certain speed in idle mode.
  • Fuel Adjust %: Adjust fuel consumption data for accuracy.
  • Sum Distance: Displays total distance.
  • Unit of SPD: Change speed unit (Km/h or Mph).
  • Unit of CWT: Change coolant temperature unit (°C or °F).
  • Unit of Fuel: Change fuel unit (L/100Km or MPG).
  • Default Set: Restore A203 data to initial factory settings.
A203 display showing the Settings menu with options: Engine Size, Fuel Type, OverSpeedSet, CoolantAlarm, Shift RPM, Shift MaxKPH, SleepTimeSet, KPH Adjust %, VLT Adjust %, LowVLT Alarm, Digit Cor, KPH Zero Set, Fuel Adjust %, Sum Distance, Unit of SPD, Unit of CWT, Unit of Fuel, Default Set.

Figure 5.1.1: A203 Settings Menu

6. Specifications

AttributeValue
Brand NameNEXPEAK
Model NameA203
Item TypeCode Readers & Scan Tools
Special FeaturesEngine Code Reader
Software UpdateYes
LanguageEnglish
Software VersionLatest
Hardware VersionOBDII OBD2 On board Computer
OriginMainland China
CertificationCE
Battery IncludedNo
Wireless SupportNo
High-concerned chemicalNone
Operating Voltage10-18V DC
Operating Current<80mA
Sleep Current<15mA
Operating Temperature-20~85℃
Product Volume73mm×90mm×60mm (approx. 2.87in x 3.54in x 2.36in)

7. Compatibility and Troubleshooting

7.1. Compatible Vehicles

The NEXPEAK A203 supports almost all cars in the market from 2000 to 2016 models that use OBD2 protocols. It is designed for standard OBD-II protocol compliant petrol and diesel vehicles.

7.2. Incompatible Vehicles

The A203 device is NOT compatible with the following vehicles or protocols:

  • J1850 Protocols: J1850 PWM, J1850 VPM (e.g., some Ford, Renault, Ssangyong, LADA, Chevrolet models).
  • European cars: Manufactured before 2004.
  • American cars: Manufactured before 2004 (e.g., Dodge, Jeep, Ford GM Chrysler).
  • French cars: (e.g., DS, Peugeot, Citroen, Renault).
  • Japanese cars: Manufactured before 2008 (e.g., Suzuki, Mazda, Toyota, Honda).
  • Korean cars: Some models manufactured before 2007 (e.g., KIA, Hyundai).
  • Chinese Cars: Manufactured before 2008.
  • Specific Vehicle Types: Oil and electricity mixing cars, diesel-powered cars, Pick-up trucks, SUVs, ORVs.
  • Known Incompatible Models: A detailed list of specific models is provided in Figure 7.2.1.
Table listing OBD2 incompatible vehicles by region and specific models, including European, American, French, Japanese, Korean, and Chinese cars, as well as certain special cars.

Figure 7.2.1: List of Incompatible Vehicles

7.3. Troubleshooting Tips

  • Initial Connection Issues: If the device does not work or causes dashboard warning lights upon first connection, try restarting the car. If issues persist, reset all settings on the A203.
  • Incorrect Parameter Readings: If some parameters are not showing correctly, reset all settings. This often resolves display inaccuracies.
  • Dashboard Lights/Fault Alarms: In some cars, abnormal dashboard lights or fault alarms may occur. Refer to the compatibility solutions in the manual or consult customer service. In some cases, twisting off excess pins on the OBD connector may resolve the issue.
  • "Piping Sound" on Startup: This is a normal operation sound during device startup and operation.

8. User Tips

  • For optimal performance, especially with older vehicles, it is recommended to verify your car's OBD protocol before purchasing.
  • If you experience any issues with parameter display or alarms, try resetting the device to factory defaults through the settings menu.
  • The compact size of the A203 allows for flexible placement on the dashboard, improving visibility without obstructing the driver's view.
  • The device is particularly useful for monitoring critical parameters like coolant temperature and battery voltage, which might not be prominently displayed on older car dashboards.

9. Warranty and Support

9.1. Warranty

The NEXPEAK A203 comes with a 1-year warranty. Please note that disassembling the machine is not covered under warranty.

9.2. Quality Problems

If there is any product quality problem, you can send it back to us in its original condition. We will repair or exchange a new one for you.

9.3. Transportation Problems

If the product is damaged during transit, please contact us before opening any dispute or leaving any negative feedback. We will do our best to fix the problem with good business manner.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.