Taidacent ZL-RC01B

Contents

Taidacent 1CH 12V Bluetooth-compatible Relay Switch Module

Model: ZL-RC01B

1. Introduction

The Taidacent ZL-RC01B is a single-channel Bluetooth Low Energy (BLE) controlled relay module designed for remote switching applications. It features a 4.1BLE communication module, allowing control via a mobile application on both Android and Apple smartphones. This module simplifies the integration of remote control capabilities into various projects, offering a convenient and password-free connection process.

Taidacent 1CH 12V Bluetooth Relay Module Top View
Figure 1: Top view of the Taidacent ZL-RC01B module, showing the Bluetooth chip and relay.

2. Safety Information

  • Ensure the input voltage (6-24V) is within the specified range to prevent damage to the module.
  • Disconnect power before making any wiring connections to avoid electrical shock.
  • Do not exceed the maximum electrical parameter of 10A for the relay switch.
  • Keep the module away from moisture, extreme temperatures, and corrosive environments.
  • This product is intended for use by individuals familiar with basic electronics and wiring.

3. Package Contents

Upon receiving your package, please verify that all items are present and undamaged:

  • 1x Taidacent 1CH 12V Bluetooth-compatible Relay Switch Module (ZL-RC01B)
  • (Note: Additional accessories such as power supply, wires, or mobile device are not included unless specified by the seller.)

4. Specifications

Feature Detail
Model Number TD12VRELAY (ZL-RC01B)
Input Voltage (Module Power Supply) 6-24V DC
Bluetooth Version 4.0 BLE
Switch Channel 1 channel
Switch Electrical Parameter 10A
Dimensions 61mm x 62mm
Origin Mainland China

5. Product Overview

The ZL-RC01B module consists of a Bluetooth communication chip, a relay, and a terminal block for connections. Understanding these components is crucial for proper setup and operation.

Taidacent 1CH 12V Bluetooth Relay Module Close-up Top View
Figure 2: Close-up top view of the module, showing the Bluetooth chip (blue), relay (yellow), and power/control circuitry.

5.1 Terminal Block Connections

The module features a 5-pin terminal block for power input and relay connections. The relay interfaces are mechanical communication, meaning they provide a switch closure/opening without voltage output. You will connect your load to these terminals.

Taidacent 1CH 12V Bluetooth Relay Module Angled View with Terminal Block
Figure 3: Angled view highlighting the 5-pin terminal block and the relay.

The relay interfaces are defined (from left to right on the terminal block) as: NO (Normally Open), A/B (Common), NC (Normally Closed).

  • Relay OFF state: The A/B (Common) terminal is connected to the NO (Normally Open) terminal.
  • Relay ON state: The A/B (Common) terminal is connected to the NC (Normally Closed) terminal.
Taidacent 1CH 12V Bluetooth Relay Module Bottom View
Figure 4: Bottom view of the module, showing solder points and board layout.

6. Setup and Installation

6.1 Power Connection

  1. Identify the power input terminals on the module. These are typically marked as '+' and '-' or 'VCC' and 'GND'.
  2. Connect a DC power supply (6-24V) to the module's power input terminals. Ensure correct polarity.
  3. Do NOT apply power until all other connections are made.

6.2 Load Connection

  1. Determine whether your application requires the relay to be Normally Open (NO) or Normally Closed (NC) when the module is powered but the relay is OFF.
  2. Connect one side of your load (e.g., light, motor) to the A/B (Common) terminal.
  3. Connect the other side of your load to either the NO or NC terminal, depending on your desired default state.
  4. Ensure the load's current draw does not exceed 10A.

6.3 Mobile Application Installation

  1. Search for the official control application (e.g., 'BLE Relay' or similar, specific app name not provided in product description) on your Android or Apple app store.
  2. Download and install the application.
  3. For Android devices, ensure your phone's hardware supports Bluetooth 4.0 and the system version is 4.3 or higher.

7. Operating Instructions

  1. Ensure the Taidacent ZL-RC01B module is powered on and correctly wired to your load.
  2. Enable Bluetooth on your mobile phone.
  3. Open the installed control application on your phone.
  4. The application should automatically search for and display available BLE relay modules.
  5. Select the ZL-RC01B module from the list to connect. No matching password is required.
  6. Once connected, use the controls within the application to switch the relay ON or OFF.
  7. Observe the status of your connected load to confirm the relay operation.

8. Maintenance

  • Keep the module clean and free from dust and debris.
  • Periodically check wiring connections for tightness and signs of wear.
  • Avoid exposing the module to direct sunlight or high temperatures for extended periods.
  • If the module is not in use for a long time, disconnect it from the power supply.

9. Troubleshooting

Problem Possible Cause Solution
Module not powering on Incorrect power supply voltage or polarity; faulty power supply. Verify power supply is 6-24V DC and connected with correct polarity. Test power supply.
Cannot connect via Bluetooth Bluetooth not enabled on phone; phone not compatible (Android < 4.3 or no BT 4.0 hardware); module out of range; app not functioning correctly. Ensure phone Bluetooth is on. Check phone compatibility. Move closer to the module. Restart the app or phone.
Relay not switching load Incorrect load wiring; load exceeding 10A; faulty load. Review load wiring (NO, A/B, NC connections). Ensure load current is within limits. Test the load independently.
Intermittent connection Interference; module too far from phone. Reduce distance between phone and module. Minimize other wireless interference sources.

10. Warranty and Support

This product is covered by the standard manufacturer's warranty against defects in materials and workmanship. For technical support, troubleshooting assistance, or warranty claims, please contact your point of purchase or the manufacturer directly. Please have your product model number (ZL-RC01B) and purchase details ready when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.