1. Introduction
The GEYA THC Astronomical Timer Switch is an advanced digital timer designed for automatic control of electrical utilities. It features an astronomical mode that adjusts ON/OFF times based on sunrise and sunset, eliminating the need for external light sensors or manual adjustments due to seasonal changes. This device is suitable for various applications requiring precise time-based control, such as lighting systems.
The timer switch is equipped with a built-in lithium battery for power failure memory and offers a perpetual calendar function for up to 40 years. It supports 8 ON/OFF programs and can be mounted on a DIN rail for easy integration into electrical panels.
2. Safety Information
WARNING: Installation and maintenance should only be performed by qualified personnel. Disconnect power before installation or servicing to prevent electric shock or equipment damage. Ensure all wiring complies with local and national electrical codes.
- Do not expose the device to moisture or extreme temperatures.
- Ensure proper grounding to prevent electrical hazards.
- Verify voltage and current ratings before connecting to a load.
3. Product Overview
The GEYA THC Astronomical Timer Switch comes in various models (THC-15B, THC-20B, THC-30B) with different current ratings. All models feature an LCD display and intuitive buttons for programming.

Figure 1: GEYA THC Astronomical Timer Switch Models (THC-15B, THC-20B, THC-30B)

Figure 2: Key Features Summary
3.1 Components and Display

Figure 3: Detailed View of Display and Buttons
The timer features an LCD screen displaying current time, date, and operational status. Control buttons include:
- P (Program): Enters program setting mode.
- RESET: Resets the device. Important: Press the RESET BUTTON to turn on the timer initially.
- MANUAL: For manual override.
- Arrow Keys (<, >, ^, v): For navigation and value adjustment.
4. Setup Instructions
4.1 Initial Power-On and Reset
Upon initial power-on or after a long period of inactivity, the product may be powered off. To activate the timer, use a pointed object (like a toothpick) to press the RESET button. The display should light up.
4.2 Setting Latitude and Date/Time
The astronomical function requires correct latitude and current date/time settings for accurate sunrise/sunset calculations.

Figure 4: Setting Latitude, Date, and ON/OFF Times
- Set Latitude:
When the product is just turned on, press the > key to enter north or south setting. Press the ^ key to change N-S. Press the > key again to enter latitude setting. Use the ^ and v keys to adjust the latitude value. - Set Date:
Press the P button to enter the date setting. Use the > key to set year, month, and day. Use the ^ and v keys to change the values. - Set Current Time:
After setting the date, press the P button again. Use the > key to set hour and minute. Use the ^ and v keys to change the values.
4.3 Setting ON/OFF Programs
The timer supports up to 8 ON/OFF programs. These can be set to follow or not follow the astronomical sunrise/sunset times.
- Setting ON Time:
Press the P button to enter the timing setting. The display will show "1 ON". Use the > key to set the hour/minute, and the ^ and v keys to change the values. - Setting OFF Time:
After setting the ON time, press the P button again. The display will show "1 OFF". Use the > key to set the hour/minute, and the ^ and v keys to change the values. - Repeat for additional ON/OFF programs (up to 8).
- After setting, press the EXIT key to save and exit.
Video 1: Demonstration of setting latitude and time on the GEYA THC Timer Switch.
5. Operating Instructions
Once programmed, the timer switch will automatically operate according to the set schedules. The astronomical function will adjust the ON/OFF times daily based on the calculated sunrise and sunset for the configured latitude.

Figure 5: Timing Function Cycle with Astronomical Adjustment
5.1 Manual Override
The MANUAL button allows for temporary override of the programmed schedule. Pressing it will cycle through different modes (e.g., ON, OFF, AUTO ON, AUTO OFF) depending on the current state and model. Refer to the display for the current mode.
6. Wiring Diagram
Proper wiring is essential for safe and correct operation. Refer to the diagram below for connection instructions. This diagram is for reference only; consult a qualified electrician if you are unsure about the wiring process.

Figure 6: Product Wiring Diagram
Note: The diagram illustrates a typical connection with a circuit breaker. Ensure the correct terminals (Line, Load, N, L, 1, 2, 3, 4, 5) are used as indicated on your specific model.
7. Maintenance
- Keep the device clean and free from dust.
- Do not use abrasive cleaners or solvents.
- The built-in lithium battery provides power failure memory. If the device loses settings frequently, the battery may need replacement by a qualified technician.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on | No power supply; Device in standby mode | Check power connections. Press the RESET button with a pointed object to activate. |
| Astronomical function not working correctly | Incorrect latitude/date/time settings; Program not set to follow astronomical mode | Verify and correct latitude, date, and time settings (refer to Section 4.2). Ensure programs are configured to utilize the astronomical function. |
| Timer does not switch ON/OFF at programmed times | Incorrect program settings; Manual override active | Review and correct ON/OFF program settings (refer to Section 4.3). Check if the device is in manual mode and switch to AUTO if necessary. |
| Settings are lost after power outage | Built-in battery depleted or faulty | The internal battery may need replacement. Contact support for assistance. |
9. Specifications

Figure 7: Technical Parameters and Dimensions
| Parameter | Value |
|---|---|
| Product Name | THC Weekly Programmable Time Switch |
| Brand Name | GEYA |
| Model Number | Astronomical Timer Switch (THC-15B, THC-20B, THC-30B) |
| Theory | Digital |
| Use | Timer Switch |
| Rated Voltage | 220VAC, 110VAC |
| Rated Frequency | 50/60Hz |
| Rated Current | 16A / 20A / 30A (depending on model) |
| Switching Contact | 1 changeover switch (1NO+1NC for 16A/20A/25A, 1NO for 30A) |
| Display | LCD |
| Mounted | Din Rail |
| Working Temperature | -10 ~ 40°C |
| Power Reserve | 3 years (built-in lithium battery) |
| Timing Error | ≤ 1 seconds/day (25°C) |
| Switch Number | 8 ON / 8 OFF |
| Control Time Range | 1 Minute - 24 Hours |
| Battery Included | Yes |
| Certification | CE |
10. User Tips
- Initial Activation: Always remember to press the RESET button with a pointed object upon first use or after a power cycle to turn on the timer.
- Latitude Accuracy: Ensure your latitude setting is accurate for the best performance of the astronomical function. Incorrect latitude will lead to inaccurate sunrise/sunset times.
- Date and Time: Double-check the current year, month, day, hour, and minute settings. These are crucial for the perpetual calendar and astronomical calculations.
- Astronomical Mode: If you intend to use the sunrise/sunset feature, ensure your programs are set to follow this mode, not fixed ON/OFF times. Some users have noted that the 'AUTO' setting might appear as 'Auto off' or 'Auto on' instead of a general 'AUTO' mode.
- Summer/Winter Time: The timer is designed to adjust its own time in winter and summer depending on when the sun rises and sets, based on the latitude setting. You typically do not need to manually adjust for daylight saving if the latitude is set correctly.
11. Warranty and Support
For warranty information, technical support, or further assistance, please contact GEYA Official Store directly. You may refer to the contact details below:

Figure 8: GEYA Contact Information
GEYA Official Store
Website: www.geya.net
Email: cassie@cngeya.com
Phone: +86 13968799499