1. Introduction
Thank you for choosing this professional moving head. You will find this to be a powerful and versatile device. Please read this user manual carefully before installing and operating the device to ensure your safety and proper function.
Inside the carton box, you should find:
- One power cable
- One user manual
- One unit of lights
- One DMX cable
- One Quick Lock
Please check carefully that there is no damage caused by transportation. Should there be any, please consult your dealer and do not install this device.
2. Safety Information
CAUTION!
- Keep this device away from rain and moisture!
- Unplug mains lead before opening the housing.
Every person involved with the installation, operation, and maintenance of this device has to:
- Be qualified.
- Follow carefully the instructions in this manual.
For added protection, install fixtures outside walkways, seating areas, or areas where unauthorized persons may come into contact with fixtures.
Before mounting the luminaire to any surface, ensure that the mounting area can withstand a minimum point load of 10 times the weight of the unit.
Clamp installations must always be secured using secondary safety accessories such as appropriate safety cables.
Never stand directly beneath the unit when installing, removing, or servicing the light fixture from the ceiling or when setting it up on a flat, level surface.
Make sure the fixture is at least 0.5m (1.5ft) away from any flammable objects (decorations, etc.).
Overhead installation requires extensive experience, including calculation of working load limits, in-depth knowledge of the installation materials used, and regular safety inspections of all installation materials and fixtures. If you lack these qualifications, do not attempt to install it yourself; improper installation may result in personal injury.
Be sure to complete all fitting and installation procedures before connecting the mains power cord to a suitable wall outlet.
3. Product Overview
The HYULIGHTS Spider Beam Moving Head Light is designed for professional stage and DJ lighting, offering powerful and versatile beam effects.




4. Setup & Installation
4.1. Mounting Points
The LED moving head provides a unique mounting bracket assembly that integrates the bottom of the base, the included 'omega bracket', and the safety cable rigging point in one unit. Refer to the illustration below for proper mounting.

4.2. DMX-512 Control Connection
Connect the supplied XLR cable to the 3-pin XLR female output of the controller and the other end to the 3-pin XLR male input of the moving head. You can chain multiple moving heads together via a serial link. The required cable should be a two-conductor shielded cable with XLR input and output connectors. Refer to the picture below for connection details.

5. Operating Modes
The device features various operating modes accessible via the LED display board and four switch buttons (MENU, UP, DOWN, ENTER).
5.1. Menu Function Overview
| Addr | A001-A512 | DMX 512 |
|---|---|---|
| CHnd | 43CH | 43 DMX Channels |
| 13CH | 13 DMX Channels | |
| SL 1 | DMX mode | |
| Mast | SL 2 | Slave mode |
| Auto | Auto mode | |
| Soun | Sound mode | |
| SHnd | SH 0 | Effect 0 (recommended) |
| SH 1 | Effect 1 | |
| SH 2 | Effect 2 | |
| SH 3 | Effect 3 | |
| Sped | 0-255 | Auto mode speed |
| SEnS | 0-100 | Sound Sensitivity Adjustment |
| bLAnd | bLAc | No DMX 512 signal |
| Auto | No DMX 512 signal Auto | |
| Soun | No DMX 512 signal Sound | |
| HLOd | No DMX 512 signal Keep the last DMX console state | |
| LEd | OFF | Screen goes off after 30 seconds |
| ON | The screen is always on | |
| dISP | no | show reverse |
| YES | show positive | |
| TiL1 | no | Y1 Motor rotates forward |
| YES | Y1 Motor reverse | |
| TiL2 | no | Y2 Motor rotates forward |
| YES | Y2 Motor reverse | |
| REST | YES | System reset |
| YES | reset |
5.2. DMX Channels (13 Channel Mode)
| Channels | Numerical value | Explanation |
|---|---|---|
| 1 | 0-255 | Y1 motor running |
| 2 | 0-255 | Y2 motor running |
| 3 | 0-255 | Motor speed |
| 4 | 0-255 | Total dimming |
| 5 | 0-255 | Red LED1-8 total dimming |
| 6 | 0-255 | Green LED1-8 total dimming |
| 7 | 0-255 | Blue LED1-8 total dimming |
| 8 | 0-255 | White LED1-8 total dimming |
| 9 | 0 | No strobe |
| 1-250 | Strobe | |
| 251-255 | No strobe | |
| 10 | 0 | Dimming channel function |
| 1-7 | Gradient effect | |
| 8-140 | Auto effect | |
| 141-255 | Sound Auto effect |
5.3. DMX Channels (43 Channel Mode)
| Channels | Numerical value | Explanation |
|---|---|---|
| 1 | 0-255 | Y1 motor running |
| 2 | 0-255 | Y1 Motor fine-tuning |
| 3 | 0-255 | Y2 motor running |
| 4 | 0-255 | Y2 Motor fine-tuning |
| 5 | 0-255 | Motor speed |
| 6 | 0-255 | Total dimming |
| 7 | 0-255 | Red 1 total dimming |
| 8 | 0-255 | Green 1 total dimming |
| 9 | 0-255 | Blue 1 total dimming |
| 10 | 0-255 | White 1 total dimming |
| 11 | 0-255 | Red 2 total dimming |
| 12 | 0-255 | Green 2 total dimming |
| 13 | 0-255 | Blue 2 total dimming |
| 14 | 0-255 | White 2 total dimming |
| 15 | 0-255 | Red 3 total dimming |
| 16 | 0-255 | Green 3 total dimming |
| 17 | 0-255 | Blue 3 total dimming |
| 18 | 0-255 | White 3 total dimming |
| 19 | 0-255 | Red 4 total dimming |
| 20 | 0-255 | Green 4 total dimming |
| 21 | 0-255 | Blue 4 total dimming |
| 22 | 0-255 | White 4 total dimming |
| 23 | 0-255 | Red 5 total dimming |
| 24 | 0-255 | Green 5 total dimming |
| 25 | 0-255 | Blue 5 total dimming |
| 26 | 0-255 | White 5 total dimming |
| 27 | 0-255 | Red 6 total dimming |
| 28 | 0-255 | Green 6 total dimming |
| 29 | 0-255 | Blue 6 total dimming |
| 30 | 0-255 | White 6 total dimming |
| 31 | 0-255 | Red 7 total dimming |
| 32 | 0-255 | Green 7 total dimming |
| 33 | 0-255 | Blue 7 total dimming |
| 34 | 0-255 | White 7 total dimming |
| 35 | 0-255 | Red 8 total dimming |
| 36 | 0-255 | Green 8 total dimming |
| 37 | 0-255 | Blue 8 total dimming |
| 38 | 0-255 | White 8 total dimming |
| 39 | 0 | No strobe |
| 1-250 | Strobe | |
| 251-255 | No strobe | |
| 40 | 0 | Dimming channel function |
| 1-7 | Gradient effect | |
| 8-140 | Auto effect | |
| 141-255 | Sound Auto effect | |
| 41 | 0-15 | Other channels |
| 15-128 | Auto effect | |
| 129-255 | Sound effect | |
| 42 | 0-255 | Control the speed and sensitivity of the 67 |
| 43 | 250-255 | Reset (stop for 3 seconds) |


6. Specifications
| Feature | Detail |
|---|---|
| Voltage | AC 110-250V / 50-60Hz |
| LED Source | 8 pcs * 15W high brightness LED (RGBW 4in1) |
| Color Mixing | RGBW, 16,700,000 kinds of colors |
| Rated Power | 150W |
| Display | LED display board with 4 switch buttons |
| DMX Channels | 13/43 DMX channels |
| Tilt | 180 degrees |
| Functions | Sound control, Auto, Master/Slave, DMX 512 |
| Strobe | 1 ~ 10 times/second |
| Dimmer | Electronic variable (0-100%) |
| Degree Protection | IP20 |
| Material | Metal/Aluminum |
| Net Weight (N.W) | 4.2KG |
| Gross Weight (G.W) | 5.2KG |
| Packing Size | 45cm * 28cm * 19cm |
7. Maintenance
Regular maintenance is crucial for the longevity and optimal performance of your Spider Beam Moving Head Light. Always disconnect the power before performing any maintenance.
- Cleaning: Periodically clean the lenses and exterior surfaces with a soft, lint-free cloth to ensure clear light output and proper heat dissipation. Avoid using harsh chemicals or abrasive materials.
- Inspection: Regularly check all cables, connections, and mounting hardware for any signs of wear, damage, or looseness. Tighten any loose screws or connections.
- Ventilation: Ensure that the ventilation openings are clear of dust and debris to prevent overheating.
- Professional Servicing: For any internal repairs or complex issues, it is recommended to seek assistance from qualified technicians.
8. Troubleshooting
If you encounter any issues with your Spider Beam Moving Head Light, please refer to the following basic troubleshooting steps:
- No Power: Check the power cable connection to both the device and the power outlet. Ensure the outlet is functioning.
- No Light Output: Verify that the dimmer is not set to 0% and that the DMX signal is correctly configured (if using DMX mode). Check for any error messages on the display.
- Incorrect Movement/Effects: Ensure the correct DMX channel mode (13CH or 43CH) is selected and that the DMX controller settings match the device's configuration. Check for any DMX signal interruptions.
- Overheating: Ensure proper ventilation and that the device is not placed in an enclosed space. Clean any dust from the vents.
- Display Issues: If the screen goes off after 30 seconds, check the 'LEd' setting in the menu.
If problems persist after attempting these steps, please contact customer support.
9. User Tips
- For the best visual effects, consider pairing this product with a fog machine.
- Experiment with different control options like DMX, Master/Slave, Stand Alone, Auto Run, Sound Active, and Strobe to find the most suitable setup for your event.
- The device is highly versatile and suitable for various professional stage and DJ occasions.
10. Warranty & Support
For detailed warranty information and further support, please refer to the complete user manual available in PDF format: User manual (PDF).
If you have any questions or require assistance during use, please contact us by email: dvdjlight@163.com.