1. Introduction
This document provides instructions for the Taidacent 80mm Remote 5V Wireless LED and Coil Inductive Charging Module. This module is designed for wireless power transmission to illuminate LEDs without direct electrical contact, ideal for various DIY projects, decorative lighting, and educational demonstrations. It consists of a transmitter coil, a driver board, and multiple receiver LED modules.
2. Package Contents
The package includes the following components:
- 1 x Transmitter Coil (80mm diameter)
- 1 x Transmitter Driver Board (with red and black power wires)
- 10 x Colorful Receiver LED Modules
3. Specifications
| Feature | Specification |
|---|---|
| Model Number | Tdxkt000109 |
| Accessory Type | Charger Accessories |
| Transmitter Input Voltage | 5 V |
| Transmitter Coil Outer Diameter | 70mm |
| Transmitter Coil Inner Diameter | 65mm |
| Transmitter Coil Thickness | 0.5mm |
| Launch Board Size (L x W x T) | 16mm x 12mm x 2.5mm |
| Receiver Lamp Outer Diameter | 4.3mm |
| Induction Distance | 0 ~ 80mm |
| Charger Included | No |
| Battery Included | No |
| Origin | Mainland China |
| Certification | NONE |
4. Setup Instructions
- **Prepare Power Source**: Obtain a stable 5V DC power source. A standard USB power adapter or a USB port on a computer can be used.
- **Connect Transmitter**: Connect the red wire from the transmitter driver board to the positive (+) terminal of your 5V power source. Connect the black wire to the negative (-) terminal (GND).
- **Position Transmitter Coil**: Place the transmitter coil on a flat, non-metallic surface where you intend to illuminate the LEDs.
- **Place Receiver LEDs**: Position the receiver LED modules within the induction range (0-80mm) of the transmitter coil. The LEDs do not require direct contact with the coil but should be within its magnetic field for illumination.
5. Operation
Once the transmitter is powered and the receiver LEDs are placed within the induction range, the LEDs will automatically light up. No additional switches or controls are typically required for basic operation.
- **Wireless Illumination**: The LEDs will illuminate when they are within the effective induction distance of the transmitter coil.
- **Distance**: The effective induction distance is between 0mm and 80mm. Performance may vary based on environmental factors and materials between the coil and LEDs.
6. Maintenance
- **Cleaning**: Keep the transmitter coil and receiver LEDs clean and free from dust. Use a soft, dry cloth for cleaning.
- **Storage**: Store the module in a dry environment, away from extreme temperatures and direct sunlight.
- **Handling**: Handle the components with care to avoid bending the coil or damaging the small LED modules and circuit board.
7. Troubleshooting
- **LEDs not lighting up**:
- Ensure the 5V power source is correctly connected to the transmitter board (red to +, black to -).
- Verify the power source is active and providing 5V.
- Check that the receiver LEDs are within the 0-80mm induction range of the transmitter coil.
- Ensure there are no thick metallic objects between the transmitter coil and the LEDs that could interfere with the magnetic field.
- **Intermittent illumination**:
- The LEDs might be at the edge of the induction range. Try moving them closer to the transmitter coil.
- Check for any loose connections on the transmitter board.
8. User Tips
- **Power Source**: A USB power source (like a phone charger or computer USB port) works well for powering the transmitter.
- **Placement**: For optimal brightness, place the LEDs as close as possible to the transmitter coil, ideally directly on top or slightly above it.
- **Creative Applications**: These modules are excellent for creating unique lighting effects in models, displays, or custom projects where wired connections are impractical.
9. Warranty and Support
For any issues or questions regarding your Taidacent Wireless LED and Coil Inductive Charging Module, please contact your retailer or the manufacturer's customer support. Keep your purchase receipt for warranty claims.