1. Product Overview & Features
The AnyTone AT-778UV Mobile Radio is designed for amateur radio enthusiasts, offering a blend of robust construction, advanced features, and user-friendly operation. It is particularly suited for vehicle use, emphasizing innovation and practicality.
Key Features:
- Power Output: 25W/15W/5W Dual Band VHF/UHF.
- Display: 180-degree rotatable TFT Color LCD for optimal viewing.
- Construction: Full alloy body for efficient heat radiation, ensuring stable and durable operation.
- Modes: Supports both Amateur and Professional modes to meet diverse operational requirements.
- Channel Management: 200 programmable memory channels, identifiable by editable names.
- Signaling: Separate CTCSS, DCS, DTMF, and 5Tone settings for each channel, allowing for selective calling and rejection of unwanted calls.
- Scan Functions: Various scan functions, including CTCSS/DCS Scan.
- Control: Smart menu control and PC programming capabilities.
- Protection: Voltage level protection.
- Convenience: LCD brightness control, automatic power-on function, main unit and microphone key lock.
- Advanced Signaling: 5Tone signaling for data transfer, alarm, all call, ANI, remote kill, remote waken. DTMF-ANI or 5Tone-ANI for automatic calling recognition.
- Microphone: Lighted keypad microphone with built-in speaker.

The AnyTone AT-778UV Mobile Radio with its color screen, designed for vehicle use.
2. Setup
2.1 Standard Package Contents
Verify that your package contains the following items:
- Transceiver (Radio Unit)
- Microphone
- Mobile Bracket
- Screws
- Pads
- Adjusting Screws
- DC Power Cable with Fuse Holder (10A 250V fuse)
- Non-slip Mat
- User Manual (PDF available for download)

Illustration of the standard package contents, including the radio, microphone, mounting hardware, user manual, and power cable.
2.2 Optional Accessories
The following accessories can enhance your radio experience:
- PC Cable (PC51)
- External Speaker
- Regulated Power Supply
- Programming Software
- Car Antenna
2.3 Mobile Installation
Choose a safe and convenient location in your vehicle that minimizes obstruction and ensures good ventilation. Avoid direct sunlight.
Mounting the Bracket:
- Install the mobile bracket using the supplied self-tapping screws (2pcs) and flat washers (2pcs).
- Position the transceiver and secure it with the supplied hexagon SEMS screws. Ensure all screws are tightened to prevent vibration.
2.4 DC Power Cable Connection
For mobile operation, the radio requires a 12V vehicle battery with sufficient current capacity. Never connect to a 24V battery.
- Route the DC power cable directly to the vehicle's battery terminals using the shortest path. Avoid using the cigarette lighter socket due to potential voltage drops.
- Ensure the entire cable length is dressed to be isolated from heat, moisture, and engine secondary cables.
- After installation, use heat-resistant tape to secure the cable and fuse box.
- Connect the red wire to the positive (+) terminal and the black wire to the negative (-) terminal.
- Use the full length of the cable without cutting off excess. Do not remove fuse holders.
- Connect the DC power cable to the transceiver's power supply connector, ensuring it clicks firmly into place.

Rear view showing the antenna connector (SO239), external speaker port, and power cable connection.
Replacing Fuses:
If a fuse blows, identify and correct the cause before replacing it with a fuse of the specified type and rating (10A). If new fuses continue to blow, disconnect the power cable and seek assistance from an authorized service center.2.5 Antenna Connection
Install an efficient, well-tuned 50-ohm impedance antenna with a low-loss coaxial feed-line. Transmitting without an antenna or a matched load can damage the transceiver. For fixed stations, use a lightning arrester.2.6 Accessories Connections
External Speaker:
If using an external speaker, choose one with an impedance of 8Ω. The external speaker jack accepts a 3.5mm (1/8") mono (2-conductor) plug. Ensure correct connection; connecting the speaker to ground can cause damage.Microphone:
Connect the microphone (equipped with an 8-pin modular plug) to the modular socket on the front of the main unit. Press firmly until the locking tab clicks.
3. Operating Instructions
3.1 Front Panel & Microphone Overview

Basic description and main parts of the radio and microphone, showing labeled buttons and display.
| No. | Key | Function |
|---|---|---|
| 1 | Power Button | Power On/Off/Mute |
| 2-7 | P1-P6 | Self-define keys |
| 8 | FUNC | Function key / function group key |
| 9 | MIC | Microphone Jack |
| 10 | Channel Switch | Channel switch / Push button / Key lock |
| 11 | LCD Display | Displays channel / frequency / function setting |
| No. | Key | Function |
|---|---|---|
| 1 | UP | Increase frequency, channel number or setting value |
| 2 | DOWN | Decrease frequency, channel number or setting value |
| 3 | PTT | Press to transmit |
| 4 | Number Keypad | Input VFO frequency or DTMF dial out etc. |
| 5 | A/B band | Choose left band or right band as Main band |
| 6 | Band indicator | Indicator light on for Main band |
| 7 | TX/RX indicator | Light green (receiving), Light red (transmitting) |
| 8 | MIC | Speak here during transmission |
| 9 | Speaker | Built-in speaker for audio output |
| 10 | Lock UP/DOWN | Locks/unlocks UP/DOWN keys |
3.2 Basic Operations
Power On/Off:
- Power On: Press the Power button. The LCD will display "WELCOME" then show the current frequency or channel.
- Power Off: Press and hold the Power button for 2 seconds. The LCD will display "CLOSING" before turning off.
Adjusting Volume:
- In standby, short press the [PX] key (programmed as VOL control), then turn the channel switch.
- Short press the [PX] key to mute/unmute the speaker.
Adjusting Frequency:
- In VFO mode, turn the channel knob to adjust frequency. Push the knob to change step size (1K, 10K, 100K, 1MHz, 10MHz).
- Use the microphone [UP]/[DOWN] keys for step-by-step frequency adjustment.
- Input desired frequency directly using the microphone number keypad.
Adjusting Channel:
- In channel mode, turn the channel knob or use the microphone [UP]/[DOWN] keys.
- Input desired channel number (001-200) using the microphone number keypad.
Receiving & Transmitting:
- Receiving: When a call is received, the screen shows a red RX icon and field strength.
- Transmitting: Hold the [PTT] button on the microphone and speak into it. The screen shows a red TX icon and field strength. Hold the microphone 2.5-5.0cm from your lips.
Switching Main/Sub Channel & VFO/Channel Mode:
- Use the [FUNC] key to switch function groups, then the [PX] key (defined as A/B or V/M function) to switch between main/sub channels or VFO/Channel modes.
Channel Edit:
In VFO mode, adjust frequency, then use [FUNC] and [PX] (CDT function) to set CTCSS/DCS codes. Long press [FUNC] to enter the channel setting menu. Select a channel number to store, then hold [PX] to confirm.
Keypad Lockout:
Long press the [PUSH] button to lock/unlock the keypad. The LCD will display "Key Lock" or "Key Unlock". Note that the PTT button and the Power button are still functional when locked.
Video demonstrating basic operations of the AnyTone AT-778UV, including screen rotation and microphone controls.
4. Maintenance
4.1 Default Settings After Resetting
| Setting | VHF | UHF |
|---|---|---|
| VFO frequency | 145.150MHz | 431.150MHz |
| Memory channel | -- | -- |
| Offset frequency | 600KHz | 5MHz |
| Channel step | 10KHz | 10KHz |
| CTCSS tone frequency | 88.5Hz | 88.5Hz |
| DCS Code | 000N | 000N |
| Output power | HI | HI |
| TOT | 3 | 3 |
| APO | OFF | OFF |
| VOL | 28 | 28 |
| Squelch Level | 3 | 3 |
5. Troubleshooting
| Problem | Possible Causes and Potential Solutions |
|---|---|
| Power is on, nothing appears on Display | Positive and negative polarities of power connection are reversed. Connect red lead to plus terminal and black lead to minus terminal of DC power supply. |
| Fuse is blown | Check and solve problem resulting in blown fuse and replace fuse with new fuse. |
| No sound comes from speaker | Squelch is muted (decrease squelch level). Tone or CTCSS/DCS squelch is active (turn CTCSS or DCS squelch off). |
| Key and Dial do not function | Key-lock function is activated. Cancel Key-lock function. |
| No Scan | Channel not listed in the scan when programmed. |
| The whole band with noise after programmed | The squelch has opened during programmed. |
| Communication range was short, bad sensitivity | a. Check the antenna is well connected and free of debris/damage. b. Output power set to Low. |
| Can not talk with other members within the group | a. Frequency/channel different (modify). b. CTCSS/DCS different (reset). c. Out of communication range. |
6. Specifications
| Feature | Specification |
|---|---|
| Frequency Range | VHF: 136-174MHz, UHF: 400-480MHz |
| Number of Channels | 200 channels |
| Channel Spacing | 25K (Wide Band), 20K (Middle Band), 12.5K (Narrow Band) |
| Phase-locked Step | 2.5KHz, 5KHz, 6.25KHz, 10KHz, 12.5KHz, 20KHz, 25KHz, 30KHz, 50KHz |
| Operating Voltage | 13.8V DC ±15% |
| Squelch | Carrier/CTCSS/DCS |
| Frequency Stability | ±2.5 ppm |
| Operating Temperature | -20℃ ~ +60℃ |
| Dimensions (W*D*H) | 124(W) x 163(D) x 39(H) mm |
| Weight | About 0.64Kg |
| Feature | Wide Band | Narrow Band |
|---|---|---|
| Sensitivity (12dB Sinad) | ≤0.25μV | ≤0.35μV |
| Adjacent Channel Selectivity | ≥60dB | ≥60dB |
| Audio Response | +1~-3dB(0.3~3KHz) | +1~-3dB(0.3~2.55KHz) |
| Hum & Noise | ≥45dB | ≥40dB |
| Audio Distortion | ≤5% | ≤5% |
| Audio Power Output | >2W@8Ω | >2W@8Ω |
| Feature | Wide Band | Narrow Band |
|---|---|---|
| Power Output | 25W/15W/5W | 25W/15W/5W |
| Modulation | 16KΦF3E | 11KΦF3E |
| Adjacent Channel Power | ≥70dB | ≥60dB |
| Hum & Noise | ≥40dB | ≥36dB |
| Spurious Emission | ≥60dB | ≥60dB |
| Audio Response | +1~-3dB(0.3~3KHz) | +1~-3dB(0.3~2.55KHz) |
| Audio Distortion | ≤5% | ≤5% |
Note: Specifications are subject to change without notice due to advancements in technology.
7. User Tips
- The AT-778UV is noted for its compact size and practical, simple operation.
- The radio supports dual reception, allowing you to monitor two frequencies simultaneously.
- To prevent overheating, especially during prolonged use at higher power settings, ensure the radio is installed in a well-ventilated area. The unit does not have an internal fan.
- If you experience low audio volume, check the squelch level and ensure it is not set too high.
8. Frequently Asked Questions (FAQ)
- Q: Does this radio support dual reception?
- A: Yes, the AnyTone AT-778UV supports dual watch, allowing you to monitor two frequencies simultaneously.
- Q: How can I prevent the radio from getting hot during use?
- A: The radio's full alloy body is designed for heat radiation. Ensure it is installed in a well-ventilated location, especially when operating at higher power outputs, to allow for proper heat dissipation.
- Q: Where can I find the programming software?
- A: If you need the programming software, please contact the seller or visit the official AnyTone website (www.anytone.net) for support.
9. Warranty & Support
The AnyTone AT-778UV typically comes with a 12-month warranty for the main unit (accessories usually have a 6-month warranty). For any issues, troubleshooting, or warranty claims, please contact your authorized AnyTone dealer or an authorized AnyTone service center. You can also visit www.anytone.net for further information and support.