1. Introduction
This manual provides detailed instructions for the installation, operation, and troubleshooting of the KCQ 8.5-inch Electric Scooter Controller Kit. This kit is designed to replace or upgrade the controller system in compatible 8.5-inch electric scooters, offering features like speed control, cruise control, self-diagnosis, and low voltage protection, along with APP connectivity for enhanced control.
2. Safety Information
⚠️ Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
Safety First: Strictly Adhere to the Following:
- Reversing the positive and negative terminals is strictly prohibited, as it will immediately burn out the controller.
- Ensure all terminals are fully inserted and securely connected to prevent short circuits or poor contact.
- The controller must operate within the specified voltage range; do not exceed the rated voltage.
- The controller's power rating must match the motor's power rating—do not use an undersized controller for an oversized motor.
- Do not use or store the controller in damp, high-temperature, or flammable/explosive environments.
- Installation should be performed by qualified personnel with electrical expertise. Non-professionals must not disassemble or attempt repairs.
3. Product Specifications
| Attribute | Specification |
|---|---|
| Product Name | KCQ 8.5-inch Electric Scooter Controller Kit |
| Brand Name | hiwheel |
| Model Number | KCQ8.5 Inch with APP |
| Type | Controller Set |
| Rated Voltage | DC 36V |
| Current Limit | 15A ± 0.5A |
| Compatible Motor Power | 350W |
| Battery Connector | XT60 |
| Max Speed | 25km/h |
| Features | Speed Control, Cruise Control, Self-Diagnostic, Low Voltage Protection, APP Connectivity |
| Origin | Mainland China |
| Authentication | CE |
For detailed compliance information, please refer to the Certificate of Conformity:
Image: Certificate of Conformity issued by Shenzhen LH Testing Technology Co., Ltd. for the electric scooter controller, confirming compliance with the Council RED Directive 2014/53/EU.
4. Package Contents
The KCQ 8.5-inch Electric Scooter Controller Kit typically includes the following components:
- Controller (main unit)
- Display Part (with digital screen)
- Accelerator
- Headlight
- Taillight
- Connection cable for controller and display part
- Wiring harness for various connections
Image: Overview of the KCQ PRO 8.5inch Scooter Controller Kit components, including headlight, taillight, accelerator, controller, display part, screen, and connection cables. A QR code for the companion app is also visible.
5. Installation Instructions
Step 1: Removal and Preparation
- Locate Original Controller: Open the scooter's footrest cover to find the original controller, typically a rectangular box with an aluminum heat sink and multiple connectors.
- Disconnect All Connections:
- Unplug the motor phase wires (usually thick yellow, green, blue).
- Unplug the motor Hall sensor wires.
- Unplug the power supply wires.
- Unplug all function wires: throttle wires, brake wires, instrument panel wires, lighting wires, etc.
- Remove Old Controller: Remove the screws securing the controller and take it out.
Step 2: Install the New KCQ Controller
- Position Alignment: Place the new KCQ controller in the original controller's location to determine if any adjustments or expansion of the installation space are needed. Ensure the heat dissipation surface faces outward and remains unobstructed.
- Initial Securing: Securely fasten the new controller to the frame using screws. Ensure it is firmly fixed to prevent loosening from riding vibrations.
Image: Example of a scooter's internal compartment showing the controller and battery installed.
Step 3: Wiring Connection (The Most Critical Step)
Principle: Connect power cables (thick wires) first, then signal cables (thin wires). Ensure all connectors are fully seated.
- Connecting Power Cables: Connect the battery wire (XT60 connector) to the controller. Connect the negative terminal first, then the positive terminal. After connecting, you may temporarily leave the power off.
- Connecting Motor Wires:
- Motor Phase Wires: Connect the controller's three thick phase wires (yellow, green, blue) to the corresponding three phase wires of the motor. Initially, connect them arbitrarily and temporarily secure with zip ties without sealing. Later, match the correct phase through debugging.
- Motor Hall Sensor Wires: Locate the Hall sensor connectors on both the controller and motor. These typically feature a foolproof design for direct plug-and-play connection. If connectors do not align, manually match each wire according to the wire sequence definition. Secure connections with solder and insulate using heat shrink tubing.
- Connect Control Signal Wires (typically plug-in connectors):
- Throttle Grip: Connect the throttle grip wire to the controller. New kits usually include a new throttle grip for direct plug-in connection.
- Brake: Connect the brake cable.
- Instrument Panel/Display: Connect the corresponding instrument wires to display speed, battery level, mode, etc.
- Other Functions: Connect wires for features like lights, cruise control, or anti-theft alarms as needed.
After completing the connections, a thorough inspection must be conducted to ensure no wiring has been overlooked.
Wiring Diagrams:
Image: Detailed wiring diagram for the controller, showing connections for Battery Wire (XT30), Taillight wire, Motor Three-Wire, Communication line, Hall line, and a 'Useless wire'.
Image: Wiring diagram for the display part, indicating connections for Accelerator, Headlight, and Brake.
Image: Diagram illustrating how to adjust motor Hall lines and phase lines to resolve issues like noise, motor shake, or reversal. It shows 6 different wiring configurations for Hall lines (Y, G, B for Yellow, Green, Blue wires) and 6 for phase lines to achieve smooth operation.
6. Operating Instructions
Basic Functions:
- Boot: Long press the power button for approximately 1 second. The buzzer will sound twice.
- Shutdown: Press and hold the power button for 3 seconds to shut down. The buzzer will sound twice.
- Lights: In the power-on state, short press the power button once (within 1 second) to turn on the front and rear lights. The headlights will be steadily on, and the taillights will be flashing.
- Brake: The scooter features electronic brake + disc brakes. The taillight will illuminate steadily when the brakes are applied.
- Gear Shift: In the power-on state, the default is the low-speed gear. Press the button twice (within one second) to switch the gear position. Green indicates low gear, and red indicates high gear.
- Battery Display:
- 33V-36V: The first light is steadily on.
- 36V-37V: One or two lights are steadily on.
- 37V-38.5V: One or two lights are steadily on.
- 38.5V or more: One, two, three, or four lights are on.
- Low Voltage Alarm: If the battery voltage drops below 33V, the first light will flash, and the buzzer will sound 6 times.
- Low Voltage Alarm Speed Mode: When the low voltage alarm is active, the speed limit is approximately 15km/h. To release the low voltage mode and return to normal operation, the throttle must be returned to its initial position once the power returns to 37V or above.
- Constant Speed Cruise: Maintain a stable speed for approximately 6 seconds to automatically activate cruise control. Once cruise is fixed, the throttle can be released. To disengage cruise control and return to manual mode, press the brake or push the throttle again.
- Speed: The low-speed gear is 15±2km/h; the high-speed gear is 25±2km/h.
- Automatic Shutdown: The scooter will automatically shut down after 10 minutes of no operation.
APP Connectivity and Control:
The controller supports APP connectivity for advanced settings and real-time monitoring. Scan the QR code provided with your kit or on the product image to download the official app.
Image: Screenshot of the APP settings interface, showing options for 'Zero start' and 'Non-zero start' modes. 'Zero start' means no initial speed is needed to start.
Image: Screenshots of the APP interface in English and French, demonstrating speed control (1st, 2nd, 3rd gear), riding time, mileage, total mileage, map, lock, and on/off functions. The app adapts to your mobile phone's system language.
Video: Demonstration of the scooter controller kit in operation, showing APP control, headlight, taillight, and motor functionality.
7. Maintenance
- Keep the controller and all connections clean and free from dust and debris.
- Regularly inspect all wiring for any signs of wear, damage, or loose connections.
- Avoid exposing the controller to water or extreme temperatures to prevent damage.
- Ensure the scooter's battery is charged according to its manufacturer's guidelines.
8. Troubleshooting
Common Fault Codes and Solutions:
- E1: Motor Hall Failure
- Cause: Motor Hall sensor damaged.
- Solution: Replace the motor.
- E2: MOS Tube Failure
- Cause: Short circuit between motor phase wires or internal controller component damage.
- Solution: 1. Check motor phase wires for insulation damage or other issues; replace the motor. 2. Replace the controller.
- E3: Brake Failure
- Cause: Damaged brake lever or brake lever not reset before startup.
- Solution: 1. Replace the brake lever. 2. Release the brake lever to reset; if the error persists, replace the brake lever.
- E4: Accelerator Failure
- Cause: Speed control handle damaged or not returned before startup.
- Solution: 1. Replace the speed control handle. 2. Loosen the speed control handle to return it to its original position; if the error persists, replace the speed control handle.
- E5: Undervoltage Protection
- Cause: Supply voltage is lower than the controller's minimum threshold.
- Solution: Charge or replace the battery.
- E6: Controller/Instrument Communication Failure
- Cause: Instrument and controller cannot communicate.
- Solution: 1. Check communication cable connections. 2. Inspect motor phase wires or Hall sensor wires for damage/leakage. 3. Replace the motor.
- E7: Overvoltage Protection
- Cause: Power supply voltage exceeds the controller's maximum threshold.
- Solution: Replace the battery with a controller-matched voltage or repair motor phase wire/Hall wire insulation damage causing leakage.
- E8: Controller Operational Amplifier Failure
- Cause: Controller damaged due to water ingress or other internal component damage.
- Solution: Replace the controller.
- E9: Stalled Rotor Fault
- Cause: Obstacles prevent motor rotation (motor lockup) or incorrect wiring sequence between motor and controller.
- Solution: 1. Loosen the throttle grip and remove the obstruction. 2. Return the motor to the controller manufacturer for re-calibration.
- E0: Thermal Protection
- Cause: Motor reaches the thermal protection threshold, instrument displays E0 fault, and motor stops.
- Solution: Wait for the motor to cool down until the temperature falls below the set value before resuming normal operation.
9. User Tips
- Wiring Accuracy: Incorrect wiring of motor phase and Hall sensors can lead to issues like low torque or unexpected high speeds (e.g., 40km/h). Always ensure correct connections, such as yellow to yellow, blue to green, and green to blue for motor phase cables, as suggested by other users.
- APP Password Reset: If you forget your APP connection password, contact customer support for assistance with a hard reset, as there is no direct user-accessible reset option.
- Brake System: The brake cable needs to be connected for proper function. The electronic brake system includes regenerative braking capabilities. The strength of the brake is generally suitable for the scooter's design.
- Controller Programming: The controller can be programmed and configured through the dedicated mobile application.
10. Warranty and Support
The manufacturer's warranty typically does not cover water damage or wire damage. It is crucial to ensure proper installation and protection from environmental factors.
For further assistance or technical support, please refer to the official user manual PDF available for download: User manual (PDF).
Non-professionals are advised not to disassemble or attempt repairs on the controller to avoid voiding the warranty and potential damage.