1. Product Information
This manual provides instructions for the installation, operation, and maintenance of the M99W1887 Parking Brake Lock, designed for Can-Am Ryker models.
- Product Name: Motorcycle Modification Parts (Parking Brake Lock)
- Model: M99W1887
- Batch/Serial Number: M99W1887
- Material: Metal
- Item Weight: 150g
- External Testing Certification: CE
- Origin: Mainland China
Compatibility:
- Can-Am Ryker 600 (2019)
- Can-Am Ryker 900 Rally Edition (2019)
This product is an aftermarket modification part intended to enhance the security of your Can-Am Ryker's parking brake. It addresses the absence of a factory-installed parking brake lock on certain models, particularly in the U.S. market.
2. Safety Warnings
WARNING: Read and strictly follow all instructions carefully.
- Professional Installation & Inspection: The installation of this product is strongly recommended to be performed by a professional motorcycle technician.
- Material & Compatibility: Before installation, confirm that the dimensions, specifications, and mounting holes of this product are a perfect match for your motorcycle's brand, model, and year.
- Modifications may affect the vehicle's appearance, performance, and even safety. The buyer bears ultimate responsibility to ensure that the installation and use of this product comply with all applicable local laws and regulations regarding vehicle modifications, road safety, and vehicle certification in their country or region.
3. Setup and Installation
This guide provides general principles. For specific steps, please refer to the included diagrams/online videos and prioritize following your motorcycle's Service Manual.
3.1. Pre-Installation Preparation
- Secure Parking: Park the motorcycle on a flat, stable surface. Turn off the engine and ensure it is securely supported by the main stand or a paddock stand.
- Tool Preparation: Use tools of the appropriate specification and good quality (e.g., torque wrench, hex keys). Do not use worn or damaged tools.
- Clean Contact Surfaces: Thoroughly clean the original mounting area on the motorcycle and the contact surface on the back of this product to ensure they are free of oil, grease, rust, or old adhesive residue.
3.2. General Installation Steps
- Trial Fit & Alignment: Before final tightening, place the product in the installation position to confirm that all holes align and that there is no contact with surrounding components.
- Secure the Lock: Use the provided stainless steel hardware (2 bolts) to mount the parking brake lock into place. Ensure it is firmly attached.
- Post-Installation Check: After installation, check by hand to ensure the part is secure and does not wobble. Slowly and carefully operate the relevant vehicle mechanisms (e.g., turning the handlebars, applying the brakes, moving the suspension up/down) while visually observing to ensure there is no interference or friction at any point in the range of motion.

Figure 1: Components included - Parking Brake Lock, two keys, and two mounting bolts.

Figure 2: The Parking Brake Lock and keys, alongside a Can-Am Ryker motorcycle, illustrating the product's application.
Video 1: Product overview and demonstration of the parking brake lock in use.
4. Operating Instructions
Once installed, the parking brake lock provides an additional layer of security for your Can-Am Ryker.
- Engage Parking Brake: Ensure your vehicle's parking brake is fully engaged.
- Insert Lock: Align the lock mechanism with the designated slot on your Ryker's parking brake lever.
- Lock the Device: Insert one of the provided keys into the lock and turn it to secure the parking brake in the engaged position. Remove the key.
- Unlock the Device: Insert the key and turn it to disengage the lock. Remove the lock from the parking brake lever before disengaging the parking brake.

Figure 3: The parking brake lock with keys inserted, ready for operation.
5. Maintenance
- Periodic Inspection: It is recommended to perform an inspection every 500 km traveled or monthly to confirm that all fasteners are secure and not loose.
- Cleaning: Clean the product surface with a soft, damp cloth. Avoid using strong acids, alkalis, or abrasive cleaners to prevent damage to the surface coating.
- Lubrication: Periodically apply a small amount of graphite lubricant to the keyhole to ensure smooth operation and prevent corrosion.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lock is stiff or difficult to turn. | Lack of lubrication, dirt/debris in keyhole. | Apply graphite lubricant to the keyhole. Clean any visible debris. |
| Lock does not fit properly. | Incorrect model year or vehicle type. Improper installation. | Verify product compatibility with your specific Can-Am Ryker model and year. Re-check installation steps for proper alignment. |
| Keys are lost or damaged. | Accidental loss or physical damage. | Contact the manufacturer or a locksmith for replacement keys. Note that keys are unique to each lock. |
7. User Tips
- Key Management: Keep one key in a safe, accessible location and the other as a spare. Avoid attaching the lock key to your main vehicle key ring to prevent accidental loss of both.
- Multiple Locks: If purchasing multiple parking brake locks, note that each lock typically comes with its own unique keys. It is generally not possible to get multiple locks that operate with the same key.
8. Specifications
| Feature | Detail |
|---|---|
| Product Name | Motorcycle Modification Parts (Parking Brake Lock) |
| Model | M99W1887 |
| Material | Metal |
| Item Weight | 150g |
| External Testing Certification | CE |
| Origin | Mainland China |
| Included Components | 1 Parking Brake Lock, 2 Keys, Stainless Steel Mounting Hardware (2 bolts) |
| Compatibility | Can-Am Ryker 600 (2019), Can-Am Ryker 900 Rally Edition (2019) |
9. Warranty and Support
For detailed warranty information, technical support, or to inquire about replacement parts, please refer to the official product documentation or contact the manufacturer directly.
A comprehensive user manual in PDF format is available for download: View User Manual (PDF).
Manufacturer: Guangzhou Lvyuan Network Technology Co., Ltd
EU Authorized Representative: MJCM SARL, 78 avenue des Champs Elysees Bureau 326, 75008 Paris, France. Tel: +33 752907452, Email: mjcm190928@gmail.com
10. Disposal
Dispose of this product and its packaging in accordance with local regulations for metal waste recycling. Recycling is encouraged.

Figure 4: Compliance and recycling symbols, indicating adherence to CE, UKCA, and RoHS standards, and encouraging proper disposal.