1. Introduction
This manual provides essential information for the installation, operation, and maintenance of your Flipsky BLDC Belt Motor 6374. Designed for high-performance DIY electric skateboards and longboards, this brushless motor offers robust power and efficiency. Please read this manual thoroughly before use to ensure proper setup and safe operation.


Video demonstrating the Flipsky 6374 BLDC motor in action on an electric skateboard.
2. Package Contents
Upon opening your package, you should find the following items:
- Flipsky BLDC Belt Motor 6374
- Motor pulley
- Keyway

3. Specifications
| Feature | Specification |
|---|---|
| Model | 6374 |
| KV Rating | 140KV / 190KV (selectable) |
| Max Power | 3500 Watts |
| Max Current | 85 Amps |
| Max Voltage | 14S (LiPo) |
| Max Torque | 8 Nm |
| Motor Resistance | 0.05 Ohm |
| Number of Poles | 14 |
| Net Weight | 980g |
| Motor Wire | 12AWG Silicon Cable, 320mm length, braided sleeve |
| Shaft Size | 8mm Round Shaft / 10mm D Shaft (depending on variant) |
| Sensor Wire | 300mm with JST-PH 6pin 2mm connector |
| Hall Sensors | Internal PCB with 120 Degree Hall Effect Sensors, with temperature sensor |
| Recommended ESC | 3-12S 50A (e.g., FSESC4.12 50A or FSESC 6.6 60A) |
Key Features:
- Advanced Magnet Design: Utilizes double-side arc shaped magnets and a convex magnet array for reduced noise and improved performance with VESC FOC mode.
- High-Temperature Magnets: Equipped with 42SH magnets, resistant to temperatures up to 115°C.
- Battle Hardened: Magnets are fully pasted with epoxy and balanced glue for enhanced durability and balanced performance.
- Precise Hall Sensor Placement: Hall sensors are accurately positioned within the motor core for precise detection of position and temperature.
- Efficient Stator Winding: Features multi-strand winding for superior heat dissipation and to minimize skin effect, ensuring higher efficiency.
- Durable Bearings: Incorporates high-quality NMB brand bearings, with a double bearing system on the bottom side and one on top for stability.
- Robust Shaft Options: Available with both round shaft with keyway and D-shape shaft, made from 420 hardened material with double M4 screws for reinforced locking.
- High-Quality Wiring: 320mm super long 12AWG silicon cable, heat-resistant and durable, packed with a braided sleeve for protection.



4. Installation
4.1 Shaft Selection and Mounting
The motor is available with either an 8mm round shaft with keyway or a 10mm D-shape shaft. Choose the appropriate shaft type for your application. The shaft is made from 420 hardened material and features double M4 screws for reinforced locking, preventing deviation.

To mount the motor to your electric skateboard or longboard, use M4 metric bolts. For optimal security with motor mounts, M4 Socket Cap bolts are recommended. Please note that mounting screws are not included with the motor.
4.2 Electrical Connections
The motor features 12AWG silicon cables, 320mm in length, with a braided sleeve for heat resistance and durability. Connect these motor wires to your Electronic Speed Controller (ESC).

The Hall sensor wire is 300mm long and terminates with a JST-PH 6pin 2mm connector. This sensor wire should be connected to your VESC (or compatible ESC) if you intend to use the motor in sensored mode. VESC Sensor Wires are required for this connection. The motor can also operate in sensorless mode, which is common for many applications.
5. Operation
The Flipsky BLDC Belt Motor 6374 is a brushless motor designed for high efficiency and power. It can be operated with or without Hall sensors, depending on your ESC and desired performance characteristics.
- Sensored Operation: Provides smoother startup and low-speed control. Requires connecting the Hall sensor wire to a compatible ESC (e.g., VESC). The internal Hall sensors offer precise position and temperature detection.
- Sensorless Operation: Most common mode of operation. The motor will still function effectively without the Hall sensor connected, relying on back-EMF for commutation.
Ensure your ESC is configured correctly for the motor's KV rating (140KV or 190KV) and battery voltage (up to 14S). Recommended ESCs are 3-12S 50A, such as the FSESC4.12 50A or FSESC 6.6 60A.
6. Maintenance
Regular maintenance will extend the lifespan and ensure optimal performance of your motor.
- Inspection: Periodically inspect the motor for any signs of wear, damage, or loose connections. Check the motor wires and Hall sensor cable for fraying or cuts.
- Cleaning: Keep the motor free from dirt, dust, and debris. Use compressed air or a soft brush to clean the exterior. Avoid using liquids that could damage internal components.
- Bearings: The motor uses high-quality NMB bearings. While designed for durability, extreme conditions or prolonged use may require bearing replacement. Listen for unusual noises, which could indicate worn bearings.
- Shaft: Ensure the shaft remains securely fastened to the motor mount and pulley. Regularly check the M4 screws for tightness.

7. Troubleshooting
If you encounter issues with your motor, consider the following common troubleshooting steps:
- Motor Not Spinning:
- Check all electrical connections between the motor, ESC, and battery.
- Ensure the ESC is properly configured for the motor type (sensored/sensorless) and KV.
- Verify that the battery is charged and providing sufficient voltage.
- Inspect motor wires for damage or shorts.
- Unusual Noises or Vibrations:
- Check for loose mounting screws or components.
- Inspect bearings for wear or damage.
- Ensure no foreign objects are obstructing the motor's rotation.
- If using a belt drive, check belt tension and alignment.
- Overheating:
- Ensure adequate airflow around the motor.
- Verify that the motor is not overloaded (e.g., incorrect gearing, excessive weight).
- Check ESC settings for proper current limits and timing.
- Inconsistent Performance:
- If using sensored mode, check the Hall sensor wire for damage or loose connections.
- Recalibrate your ESC if necessary.
For persistent issues, consult the documentation for your ESC or seek assistance from experienced DIY electric skateboard builders.
8. User Tips
No specific user tips were available from provided reviews or Q&A. However, general tips for electric skateboard motors include:
- Always perform a bench test before riding to ensure all components are functioning correctly.
- Regularly check belt tension; too tight can strain the motor and bearings, too loose can cause slippage.
- Consider using thread-locker on all mounting screws to prevent them from vibrating loose during operation.
- Monitor motor temperature, especially during aggressive riding or in hot weather, to prevent overheating.
9. Warranty and Support
For warranty information and customer support, please refer to the seller's policies or contact Flipsky directly through their official channels. Keep your purchase receipt as proof of purchase.
Additional Services:
- Free Returns: Check with the seller for details on free returns within a specified period (e.g., 90 days).
- Fast Delivery Guarantee: Inquire about guarantees for fast delivery, which may include compensation for delays.
- Security & Privacy: Your personal details are protected and not shared with third parties without consent.