Introduction
The Mileseey MC616 is a multi-function digital multimeter designed for high measurement accuracy, fast response, and a high safety level. It features a dedicated chip with up to 2000 counts, high-precision AD, and a high-speed digital processor, ensuring accurate measurements, high resolution, and fast operation. The device undergoes complete software calibration, maintaining consistent accuracy over long-term use.
Its aesthetic design is suitable for various industrial applications, with a safe and reliable circuit. The multimeter offers numerous measurement functions and a user-friendly interface, catering to the needs of professional engineers and maintenance personnel.
This instrument can measure AC and DC voltage, AC and DC current, resistance, capacitance, temperature, diodes, and perform circuit continuity tests. It is equipped with a backlight and flashlight for easy reading in dark environments.
Product Overview Video
This video demonstrates the key features and functions of the Mileseey Digital Multimeter, including temperature measurement, precision dial, anti-collapse bracket, back test pen slot, flashlight, intelligent anti-burn protection, NCV non-contact voltage measurement, HD backlight, AC voltage test, and resistance test.
Safety Information
When using this meter, the user must comply with all standard safety regulations to prevent electric shocks and misuse of the instrument. To ensure personal safety, always use the provided test leads, checking them for integrity before each use.
Safety Symbols
| Symbol | Meaning |
|---|---|
| ⚠ | Warning, important safety information. Refer to the user manual before use. Misuse may damage equipment or its components. |
| ~ | AC (Alternating Current) |
| ⎯ | DC (Direct Current) |
| ⏚ | Ground |
| ⏛ | Double Insulation |
| ⏟ | Fuse |
| CE | Conforms to European Union directives |
| ⚡ | High Voltage Warning |
| CAT II | Category II 600V Overvoltage Protection |
Safety Notices
- Using the meter near devices with strong electromagnetic interference may cause unstable readings or large errors.
- Do not use the meter if its appearance or the test leads are damaged.
- Incorrect use may compromise the meter's safety functions.
- Exercise extreme caution when working around bare conductors or busbars.
- Do not use this instrument in environments with explosive gases, vapors, or dust.
- Always use the correct input terminals, function, and range for measurements.
- Ensure input values do not exceed the maximum limits for each range to prevent damage.
- Do not touch unused input terminals when the instrument is connected to a circuit under test.
- When measuring voltages exceeding 60 VDC or 30 VAC, exercise caution to prevent electric shock.
- When measuring with test pens, keep your fingers behind the guard rings.
- Before changing the range, ensure the test pens are disconnected from the circuit under test.
- Before measuring resistance, diodes, capacitance, or performing continuity tests, power off the circuit and discharge all high-voltage capacitors.
- Do not measure resistance or perform continuity tests on live circuits.
- Before measuring current, check the meter's fuse. Turn off the circuit power before connecting the meter.
- When repairing TVs or power conversion circuits, be careful of high-amplitude voltage pulses to avoid damaging the meter.
- This meter uses three 1.5V AAA batteries. Ensure they are correctly installed.
- If the low battery symbol appears, replace the batteries immediately. Insufficient battery power can lead to incorrect readings, electric shock, or personal injury.
- Do not measure voltages exceeding 600V. Do not use the instrument if its housing or part of it is removed.
Setup
Battery Installation
The meter is powered by three 1.5V AAA batteries. To install or replace batteries:
- Turn off the instrument power.
- Disconnect all test leads from the input sockets.
- Use a screwdriver to loosen the screws securing the battery cover.
- Remove the battery cover.
- Remove old batteries or damaged fuses.
- Insert new 3x 1.5V AAA batteries, observing polarity.
- Replace the battery cover and tighten the screws.
Warning: To avoid electric shock or personal injury, replace batteries immediately when the low battery symbol appears on the display. Use only specified fuses (200mA/250V, 10A/250V fast-blow fuses).
Test Lead Connection
Always connect the black test lead to the "COM" input socket. Connect the red test lead to the appropriate input socket based on the measurement function (e.g., "VΩmA" for voltage, resistance, or low current, "10A" for high current).
Operating Instructions
Panel Indication and Display Symbols
- Illumination (Flashlight)
- NCV Non-contact Voltage Sensing Area
- LCD Display Screen
- Buzzer Indicator & Infrared Indicator (MC618C, MC619A, MC619C models only)
- Backlight & Illumination Button
- hFE Transistor Test Socket
- Dial Gear Selection (Rotary Switch)
- VΩmA Input Jack
- COM (Negative Pole) Input Jack
- 10A Current Jack
- HOLD Button
- NCV Indicator & Infrared Receiving Window (MC618C, MC619A, MC619C models only)
Display Symbols Instructions
| Symbol | Instruction |
|---|---|
| 🔋 | Low battery indicator / Low battery power. Replace battery immediately to avoid inaccurate readings or electric shock. |
| ⏻ | Auto power off function indicator. |
| - | Negative input polarity indicator. |
| AC | AC input indication. |
| DC | DC input indication. |
| 🔊 | Buzzer (Continuity test mode). |
| →|• | Diode test mode. |
| hFE | Transistor test mode. |
| HOLD | Data hold mode. |
| °C | Temperature unit (Celsius). |
| NCV | Non-contact AC voltage detection mode. |
| V, mV | Voltage unit. |
| A, mA, µA | Current unit. |
| Ω, kΩ, MΩ | Resistance unit. |
General Operation
- HOLD Function: Short press the "HOLD" button to enter data hold mode. The current reading will be frozen on the display. Change the function range or press "HOLD" again to exit.
- Backlight and Flashlight:
- Short press the ★ button to turn on the backlight. Short press again to turn it off. It will automatically turn off after 15 seconds of inactivity.
- Long press the ★ button to turn on both the flashlight and backlight. Short press again to turn them off. They will automatically turn off after 30 seconds of inactivity.
- If the backlight is on, long pressing the button for 2 seconds will also turn on the flashlight. Both will turn off after 30 seconds of inactivity.
- Auto Power Off: If there is no operation for about 15 minutes after power-on, the meter will emit a "beep" sound and automatically shut down, entering hibernation mode. Press any button to restart.
Measurement Functions
ACV and DCV Measurement
Warning: Do not measure any voltage greater than 600V to prevent electric shock or damage to the instrument. Do not apply more than 600V between the common terminal and earth.
- Turn the rotary switch to the "V" (DCV) or "~V" (ACV) position.
- Connect the black test lead to the "COM" jack and the red test lead to the "VΩmA" jack.
- Measure the voltage across the circuit under test using the other ends of the test leads.
- The reading will be shown on the LCD display. If measuring DC voltage and the red test lead is connected to the negative pole, a "-" symbol will be displayed.
Note: For DCV 200mV and 2V ranges, the meter may show some readings even without input or test leads connected. Short circuit "VΩmA" and "COM" to zero the display. If "OL" is displayed, it indicates over-range; switch to a higher range.
Resistance Measurement
Warning: To avoid damage to the meter or device under test, cut off all power to the circuit and fully discharge all high-voltage capacitors before measuring resistance.
- Turn the rotary switch to the "Ω" position.
- Connect the black test lead to the "COM" jack and the red test lead to the "VΩmA" jack.
- Measure the resistance of the circuit under test using the other ends of the test leads.
- The reading will be shown on the LCD display.
Notes:
- Measured resistance on a circuit may differ from the component's rated value due to parallel components.
- For accurate low resistance measurements, short-circuit the test leads first to read the lead resistance, then subtract it from the measurement.
- For 20MΩ range, readings may take a few seconds to stabilize.
- If "OL" is displayed when the meter is not connected to a circuit, it indicates the measurement value is out of range.
Diode and Continuity Test
Warning: To avoid damage, cut off all power and discharge high-voltage capacitors before testing diodes or continuity.
Diode Measurement
- Turn the rotary switch to the "→|•" position.
- Connect the black test lead to "COM" and the red test lead to "VΩmA".
- Connect the black test lead to the negative electrode and the red test lead to the positive electrode of the diode under test.
- The meter will display the forward bias voltage. If polarity is reversed, "OL" will be displayed.
Continuity Test
- Turn the rotary switch to the "🔊" position.
- Connect the black test lead to "COM" and the red test lead to "VΩmA".
- Measure the resistance of the circuit under test. If the resistance is less than 30Ω, the indicator light will turn on and the buzzer will sound continuously.
Current Measurement
Warning: Do not attempt current measurement on a circuit if the voltage between the open circuit and ground exceeds 250V. If the fuse blows, you may damage the meter or harm yourself. Use correct input sockets, function, and range. When the test pen is plugged into the current input socket, do not connect the other end of the test pen in parallel to any circuit.
- Turn the rotary switch to the "mA/A" position.
- Connect the black test lead to the "COM" input. For currents less than 200mA, connect the red test lead to "VΩmA". For currents between 200mA and 10A, connect the red test lead to "10A".
- Disconnect the circuit under test. Connect the black test lead to the lower voltage end of the disconnected circuit, and the red test lead to the higher voltage end.
- Connect the power supply to the circuit and read the displayed value. If "OL" is displayed, it indicates over-range; switch to a higher range.
Due to safety concerns with breaking the circuit for current measurement, it is recommended to use a clamp ammeter for current measurement if available.
NCV (Non-Contact Voltage) Test
- Turn the rotary switch to the "NCV" position.
- Place the top of the meter close to the conductor.
- If AC voltage is detected, the corresponding signal strength indicator will light up (low-yellow, high-red), and the buzzer will emit different frequency alarms.
Notes:
- Voltage may still be present even without an indication. Do not rely solely on NCV detectors to determine if a conductor is live, as factors like socket depth, insulation thickness, and type can affect detection.
- Input voltage to the instrument can cause the voltage-sensing indicator to light up due to induced voltage.
- External interference sources (e.g., flashlights, motors) may accidentally trigger NCV detection.
Infrared Signal Detection (MC618C, MC619A, MC619C models only)
- Turn the rotary switch to the "📶" position.
- Point the emitter head of an infrared remote control perpendicular to the meter's infrared receiving window (deviation not more than ±15 degrees).
- Press the remote control's launch button. If the red LED lights up, the transmitter is working correctly.
- At a distance of 1-30cm, the mobile transmitter's input power state can be determined.
Notes:
- Strong direct light on the receiving window will cause the red indicator to light up and change with light intensity. To detect infrared remote controls, keep the multimeter away from other strong light sources.
- The remote control transmitter must be perpendicular to the instrument. Maximum deviation of the infrared receiver is ±15 degrees.
- Wireless remote controls cannot be detected.
Temperature Measurement (MC619C models only)
- Turn the rotary switch to the "°C" position. The meter will directly display the ambient temperature.
- Connect the thermocouple (included with C models) to the "COM" and "VΩmA" input jacks, observing polarity.
- The meter will display the approximate temperature transmitted by the thermocouple.
Transistor (hFE) Measurement
Warning: Do not apply more than 36V DC or AC voltage between the common terminal and hFE terminal to prevent electric shock or damage to the instrument.
- Turn the rotary switch to the "hFE" position.
- Determine if the transistor is NPN or PNP type. Insert the emitter, base, and collector pins into the corresponding holes in the hFE test socket.
- The LCD display will show the approximate hFE value of the measured transistor (0-1000).
Maintenance
General Maintenance
Warning: To avoid electric shock or damage, do not wet the inside of the meter. Before opening the housing or battery cover, ensure the test leads are disconnected from the circuit under test.
- Periodically clean the meter housing with a damp cloth and a small amount of detergent. Do not use abrasives or chemical solvents.
- If input sockets become dirty or wet, it may affect readings.
- When opening the instrument case or removing the battery cover, always pull out the test leads first.
- Only use specified replacement parts for servicing.
- Before opening the meter, disconnect all power and ensure no static electricity to avoid damage.
- Calibration and maintenance should only be performed by qualified professionals.
- Some capacitors inside the instrument may retain dangerous voltages even after the instrument is turned off.
- If any abnormality is observed, stop using the meter immediately and send it for repair. Ensure it is inspected and qualified before reuse.
- When not in use for a long time, remove the batteries and store the meter in a cool, dry place, away from high temperatures and humidity.
Battery and Fuse Replacement
Refer to the "Setup" section for detailed instructions on battery replacement. For fuse replacement, ensure you use the correct type and rating (200mA/250V for mA range, 10A/250V for A range).
Troubleshooting
- No Display / Meter Not Turning On: Check battery installation and ensure batteries are not depleted.
- Low Battery Symbol (🔋): Replace batteries immediately to ensure accurate readings and prevent potential hazards.
- "OL" Display: Indicates that the measured value exceeds the selected range. Switch to a higher measurement range.
- Unstable Readings: Ensure the meter is not being used near strong electromagnetic interference. Check for loose test lead connections or damaged leads.
- Inaccurate DC Voltage Readings (e.g., 0.3V difference): This may indicate a need for calibration. Contact customer support for assistance.
- Fuse Blown: If the meter does not measure current, the fuse might be blown. Replace it with a fuse of the correct type and rating.
- No Buzzer Sound / No Diode Reading: Check if the test leads are properly connected and if the function is correctly selected. Ensure the circuit under test is de-energized and capacitors are discharged.
Specifications
General Characteristics
- Operating Conditions:
- 600V CAT II Pollution Grade: 2
- Height: Under 2000m
- Working Temperature: 0-40°C (<80%RH, not considered <10°C)
- Storage Temperature: -10-60°C (<80%RH, remove battery)
- Test/Calibration Temperature: 20°C ± 2°C
- Maximum Voltage between Measurement End and Ground: 600V
- Fuse Protection:
- mA Range: FF 200mA/250V
- A Range: FF 10A/250V
- Conversion Rate: Approximately 3 times/second
- Display: 1999 counts LCD display
- Over Range Display: 'OL'
- Low Voltage Display: 🔋 (displayed when working voltage is low)
- Input Polarity Indicator: '-' (shown automatically)
- Battery: 3 x 1.5V AAA batteries
- Dimensions: 147mm (L) x 71mm (W) x 45mm (H)
- Weight: Approximately 220g (excluding battery)
Accuracy Index
Accuracy: ± (%reading + digit), one-year warranty from manufacturing date. Reference Conditions: ambient temperature from 18°C to 28°C, <80%RH.
DC Voltage (DCV)
| Range | Resolution | Accuracy |
|---|---|---|
| 200mV | 0.1mV | ± (0.5% readings + 5 digits) |
| 2V | 1mV | |
| 20V | 10mV | |
| 200V | 100mV | |
| 600V | 1V |
Input Resistance: 1MΩ, Maximum Input Voltage: 600V
AC Voltage (ACV)
| Range | Resolution | Accuracy |
|---|---|---|
| 200V | 100mV | ± (1% readings + 10 digits) |
| 600V | 1V |
Input Resistance: 1MΩ, Maximum Input Voltage: 600V, Frequency Response: 40Hz to 400Hz
Resistance
| Range | Resolution | Accuracy |
|---|---|---|
| 200Ω | 0.1Ω | ± (1% readings + 3 digits) |
| 2kΩ | 1Ω | |
| 200kΩ | 100Ω | |
| 2MΩ | 1kΩ | |
| 20MΩ | 10kΩ |
Overload Protection: 250V DC/AC, Open Circuit Voltage: 2.4V
Diode and Buzzer
| Function | Test Conditions |
|---|---|
| Diode Test (→|•) | Displays the approximate value of the forward voltage drop. |
| Continuity Test (🔊) | Buzzer sounds when resistance is less than 30Ω, and indicator light turns on. |
Overload Protection: 250V
Transistor (hFE)
| Range | Description | Condition |
|---|---|---|
| hFE | Approximate value shown (0-1000) | Base current: ~10µA, Vce: ~2.8V |
DC Current (DCA)
| Range | Resolution | Accuracy |
|---|---|---|
| 2mA (MC616 only) | 1µA | ± (1% readings + 5 digits) |
| 20mA | 10µA | |
| 200mA | 100µA | ± (3% readings + 10 digits) |
| 10A | 10mA |
Overload Protection: mA range with F 200mA/250V, 10A range with F10/250V. For currents over 5A, test time should be less than 10 seconds, and a one-minute break should be taken after such measurement.
Temperature (MC619C models only)
| Range | Resolution | Test Range | Accuracy |
|---|---|---|---|
| °C | 1°C | -20°C ~ 1000°C | ± (1.0% readings + 3 digits) |
Overload Protection: 250V
User Tips
- This multimeter offers accurate measurement of various parameters including voltage, current, resistance, capacitance, and inductance, making it a versatile tool for multiple functions.
- The continuity test function is noted for its fast response.
- Be aware that the diode test measures at 2.2 volts, which means not all types of LEDs can be tested with this device.
- The NCV (Non-Contact Voltage) function is effective for detecting live wiring, including hidden wires in walls.
- The built-in backlight is highly beneficial for taking measurements in dimly lit or dark environments.
- The device features an anti-collapse bracket for convenient hands-free use and a back test pen slot for organized storage of test leads.
- The intelligent anti-burn protection helps prevent damage to the meter from incorrect usage.
Warranty and Support
Warranty Information
Mileseey Technology Co., Ltd. guarantees that this product is complete and in good working condition, offering a one-year free maintenance service from the date of purchase. Details are as follows:
- One-year free maintenance service from the date of purchase.
- To claim service, the user must present this warranty card and the original purchase invoice/receipt.
- If a malfunction occurs during the warranty period under normal use, and is confirmed by Mileseey technical staff to be due to normal conditions, the company will provide free repair or replacement of parts.
- All replaced parts become the property of Mileseey Technology Co., Ltd.
- Any shipping costs incurred are the responsibility of the user.
- The warranty will be void under the following circumstances:
- The product has been repaired or modified by unauthorized personnel.
- Damage caused by incorrect operation, overload use, or natural disasters.
- Failure to operate or maintain the product according to the instructions in the manual.
- The product model has been discontinued for more than five years.
- Mileseey Technology Co., Ltd. is not responsible for any other losses caused by the use of the product.
- This free warranty service does not cover: fuses, batteries, test leads, thermocouples, and all other accessories.
- This warranty card is only valid in mainland China.
- For any other matters, please refer to national "Three Guarantees" regulations.
Important: Please keep this warranty card and the original purchase invoice/receipt. These must be presented to the technician for repair.
Contact Information
Shenzhen Mileseey Technology Co., Ltd.
Office Address: No.3601 Block A, Tanglang Town Plaza West, Fuguang Community, Taoyuan Street, Nanshan District, Shenzhen, China
Phone: 0755-86329055
Website: www.mileseey.com
User Manual (PDF): A detailed user manual in PDF format is available for download. Please refer to the official Mileseey website for the latest version.