1. Introduction
This manual provides instructions and information for the genuine replacement parts and fuel fire nozzles compatible with BRS-12, BRS-12A, BRS-8B, and BRS-29 outdoor camping oil stoves. These parts are essential for maintaining the performance and safety of your BRS camping stove.
2. Product Overview
The available genuine parts include:
- Fuel Fire Nozzles: Specific nozzles designed for different fuel types (kerosene, diesel, gasoline) and stove models.
- Pump Cups: Replacement cups for the stove's fuel pump.
- Fire Cover: A component for the stove's burner.
- Funnel: For safe and easy fuel refilling.
- Pump Tool (Switch Tool): A tool for pump maintenance.
3. Nozzle Selection and Compatibility
Selecting the correct nozzle is crucial for optimal stove performance and safety. Refer to the table below and the images for proper identification.
| Nozzle Number | Compatible Stove Models | Recommended Fuel Type |
|---|---|---|
| 30# | BRS-8, BRS-8A, BRS-8B | Kerosene, Diesel Oil |
| 33# | BRS-12A, BRS-28, BRS-29B | Gasoline/Petrol |
| 35# | BRS-8, BRS-8A, BRS-8B | Gasoline/Petrol |
The diameter of the nozzle screw threads is 3.8mm.
4. Setup and Installation
4.1 General Installation of Parts
When replacing any part, ensure the stove is completely cool and depressurized. Use appropriate tools and follow the specific instructions for your BRS stove model. Always ensure a tight seal to prevent leaks.
For pump cups, ensure they are properly seated in the pump mechanism. For fire covers, align them correctly over the burner.
4.2 Inflatable Connector Setup (for 1lb Propane Tank Charging)
This section describes the quick connection process for charging a 1lb propane tank from a larger gas source using an Inflatable Connector. This may be a related accessory for some BRS stove systems.
- Connect the 1lb propane tank to the 1"-20unf thread of the inflation connector and turn it to tighten.
- The 1lb tank must be kept upright at all times.
- Connect the inner tooth of the movable hand wheel of the gas filling joint with the propane adapter.
- The 1lb tank must be kept upright at all times.
4.3 Checking for Leaks
After connecting any fuel lines or components, always check for leaks using soapy water or a leak detector spray:
- Apply a small amount of soapy water solution to the outside of the connection between the propane adapter hose and Inflatable Connector and 1lb Propane Tank and the gas terminal, then turn on the air source.
- If bubbles emerge from the soapy solution, this indicates a leak. If no bubbles appear, there is no leak. If there's a leak, turn off the gas.
- Tighten the connections. Repeat steps 1 and 2.
- If bubbles continue to appear, close the gas and contact your dealer.
Warning: Do not submerge the Inflatable Connector in water. Do not attach the Inflatable Connector to the Propane adapter until it is attached to the Propane Tank. Keep the Inflatable Connector away from extreme temperatures. Keep the 1lb Propane Tank upright at all times. Ensure the 1lb Propane Tank is empty before use.
California Proposition 65 Warning: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information, go to p65warnings.ca.gov.
5. Operating Considerations
While these are replacement parts, proper operation of your stove depends on their correct selection and installation.
- Always use the nozzle corresponding to your stove model and the specific fuel type you intend to use. Using an incorrect nozzle can lead to poor performance, fuel wastage, or dangerous flare-ups.
- Ensure all connections are secure and leak-free before igniting the stove.
- When refilling fuel, use the provided funnel to prevent spills and ensure safety.
6. Maintenance
Regular maintenance of your stove parts ensures longevity and safe operation.
- Keep nozzles clean and free from carbon buildup or debris. A clogged nozzle can affect flame quality and fuel efficiency.
- Inspect pump cups periodically for wear and tear. Replace them if they appear cracked, stiff, or no longer provide adequate pressure.
- Store all parts in a clean, dry place when not in use.
7. Troubleshooting
- Fuel Leakage: If you detect fuel leakage, immediately turn off the fuel supply. Re-check all connections, especially after replacing parts, and perform a leak test as described in Section 4.3. Tighten connections as necessary. If leaks persist, discontinue use and contact support.
- Poor Flame or Clogging: This may indicate a clogged nozzle or an issue with fuel pressure. Ensure the correct nozzle is installed for the fuel type. Clean the nozzle or replace it if necessary. Check the pump cup for proper function and replace if worn.
8. Specifications
| Attribute | Value |
|---|---|
| Brand Name | BRS |
| Model (Part Type) | Switch Tool, Fuel Fire Nozzles, Pump Cups, Fire Cover, Funnel |
| Type | Genuine Parts / Accessories |
| Material | Metal (nozzles, pump tool), Rubber/Plastic (pump cups, funnel) |
| Fuel Compatibility (Nozzles) | Kerosene, Diesel, Gasoline |
| Application Method | Manual |
| Nozzle Thread Diameter | 3.8mm |
| High-concerned chemical | None |
| Usage Condition (Compatible Stoves) | Normal Outdoor |
| Fuel (Compatible Stoves) | Butane (for gas stoves), Kerosene, Diesel, Gasoline (for liquid fuel stoves) |
| With Ignition Device or Not (Compatible Stoves) | Not Included |
| Disposable (Compatible Stoves) | No |
| Number of Users (Compatible Stoves) | 3-5 |
| Certification | NONE |
| Category | Gas Stove Accessories |
| Stove Type (Compatible Stoves) | Gas Stove / Oil Stove |
| Style (Compatible Stoves) | Outdoor |
Package Dimensions and Weight:
- Length: 20 cm
- Width: 15 cm
- Height: 10 cm
- Weight: 0.12 kg
9. User Tips
- These genuine parts are effective for repairing spray nozzles and maintaining stove performance.
- Pump cups are typically made of rubber; ensure they are flexible and seal properly. Some users have successfully created durable replacement pump pistons from sturdy materials like knee belt leather, which can last for many years.
- Always double-check the nozzle number against your stove model and fuel type before installation to avoid issues.
10. Frequently Asked Questions (FAQ)
- Q: What category do these parts belong to?
- A: They belong to the Gas Stove Accessories category.
- Q: What is the thread diameter of the nozzles?
- A: The nozzle thread diameter is 3.8mm.
11. Warranty and Support
We offer a 1-month free replacement for non-electrical components. Buyers may request a replacement within 15 days from the receipt of the product. The buyer should return the product in its original condition and bear the shipping costs for return.
For detailed information and further assistance, please refer to the official user manual (PDF) available at: BRS Stove Parts User Manual (PDF). If you encounter persistent issues or require technical support, please contact your dealer or the manufacturer directly.