Dooya DT52E-75W

Contents

Dooya DT52E 75W Electric Curtain Motor User Manual

Model: DT52E-75W

1. Introduction

The Dooya DT52E 75W Electric Curtain Motor is designed to automate your curtain system, integrating seamlessly into smart home environments. This tubular motor provides reliable and quiet operation for various curtain types, enhancing convenience and comfort in your living space. This manual provides essential information for the safe installation, operation, and maintenance of your DT52E motor.

2. Safety Information

  • Ensure the power supply matches the motor's voltage requirements (220-240V).
  • Installation should be performed by a qualified professional or someone with electrical knowledge.
  • Disconnect power before performing any installation, maintenance, or troubleshooting.
  • Keep hands and loose clothing away from moving parts during operation.
  • Do not expose the motor to moisture or extreme temperatures.
  • This product is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Specifications

Dooya DT52E Motor label with specifications

Figure 3.1: Motor label showing detailed specifications.

Table 3.1: Technical Specifications (DT52E-75W)
Attribute Value
Model NumberDT52E-75W
Wattage75W
Voltage220-240V
Rolling Speed14cm/s
Rated Power75W
Open/Close Speed20 cm/sec
Rated Current0.34 A
Run Time4 min
Degree of Protection (IP)20
Max Number of Turns30 Turn
Max Track Length≤12 m
Weight1.2 KG
CertificationCE
EU LVD VoltageLow voltage: Below 50Vac or 75Vdc
Battery IncludedNo
High-concerned chemicalNone
OriginMainland China

4. Setup and Installation

4.1 Physical Overview and Dimensions

Dooya DT52E Motor with dimensions and control points

Figure 4.1: Motor dimensions (24.5cm length, 7cm diameter) and location of interface, LED indicator light, and set key.

4.2 Internal Structure and Components

Detailed diagram of DT52E motor showing internal structure, nameplate, wiring, and motor ends

Figure 4.2: Detailed diagram illustrating the motor's internal components (Electronic Limit, Capacitor, Built-in Receiver, Motor+ Clutch, Gearbox), outline, and views of the motor head and motor end.

4.3 Wiring Instructions

Refer to Figure 4.2 for the wiring diagrams. Ensure correct connections based on your local voltage standard.

  • For 230V/50Hz systems:
    • Blue wire: Neutral
    • Brown wire: Direction
    • Green/Yellow wire: Earth
  • For 120V/60Hz systems:
    • White wire: Neutral
    • Black wire: Direction
    • Green wire: Earth

4.4 Initial Programming Steps

Follow these steps to program your motor:

  1. Step 1: Select the first indicator light.
  2. Step 2: Open the back cover of the motor. Locate the P2 key on the left side. Power on the motor. Press and hold the setting key (P2) for 3 seconds. The motor indicator light will turn on.
  3. Step 3: Press the PS key on the left once. The motor indicator light will flash slowly. Press the P2 key on the left again, and the motor indicator light will flash quickly.

After these steps, test the up and down keys on your remote controller (e.g., DC1660, as shown in Figure 4.2). If the curtains respond correctly, the programming is successful.

5. Operating Instructions

Once installed and programmed, the Dooya DT52E motor can be operated using a compatible Dooya remote controller (e.g., DC1660). Refer to your remote controller's manual for specific button functions.

  • Open/Close: Use the designated buttons on your remote to fully open or close the curtains.
  • Stop: Press the stop button to halt the curtain movement at any desired position.
  • Intermediate Position: Some remote controllers allow setting an intermediate stop position. Consult your remote's manual for this feature.

6. Maintenance

  • Cleaning: Wipe the motor casing with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Inspection: Periodically check all wiring connections to ensure they are secure.
  • Lubrication: The motor is designed for long-term, low-maintenance operation. Avoid applying external lubricants unless specifically instructed by Dooya support.
  • Track Maintenance: Ensure the curtain track is clean and free of obstructions to allow smooth movement and prevent strain on the motor.

7. Troubleshooting

Table 7.1: Common Troubleshooting Steps
Problem Possible Cause Solution
Motor does not respond to remote. No power; Remote battery low; Motor not paired; Obstruction in track. Check power supply; Replace remote battery; Re-pair motor and remote (refer to Section 4.4); Clear track.
Curtains stop unexpectedly. Obstruction in track; Limit settings incorrect. Clear track; Re-adjust limit settings (refer to full user manual PDF).
Motor makes unusual noise. Obstruction; Motor malfunction. Check for and remove obstructions; Contact support if noise persists.
Motor indicator light not behaving as expected. Programming issue. Repeat programming steps in Section 4.4.

8. User Tips

  • Motor Selection: For curtain tracks less than 5 meters, a 45W motor is generally sufficient. For tracks longer than 5 meters, a 75W motor (like this DT52E-75W model) is recommended for optimal performance.
  • Color Accuracy: Product photos are taken of real products, but slight color discrepancies may occur due to lighting conditions and computer screen settings.
  • Quiet Operation: The DT52E motor features a mute design, operating at less than 38dB, comparable to the sound of flowers, ensuring a quiet environment.
  • Mute design diagram showing noise levels

    Figure 8.1: Mute design illustration indicating low noise operation (<38dB).

9. Warranty and Support

For detailed warranty information and further technical support, please refer to the official user manual PDF available at: Dooya DT52E User Manual (PDF). You may also contact the seller or manufacturer directly for assistance with specific issues or inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.