1. Introduction
The RETEKESS TD106 Wireless Watch Receiver integrates wireless transportation technology, digital identification, a dot matrix LCD display, and a microprocessor to provide time display and wireless calling functions. This device features a removable rechargeable battery for long standby time and includes a safe charging circuit. Its fashionable watch design makes it suitable for a wide range of applications, including restaurants, bars, cafes, hospitals, hotels, and factories.

Figure 1: RETEKESS TD106 Wireless Watch Receiver
2. Key Features
- RF wireless technology
- Fashionable watch design
- Dot matrix LCD screen
- Supports up to 999 channels
- Call button data pin support for custom settings
- Call button words selectable
- Single or list display mode
- Accurate time display
- Vibration/Buzzer prompt
- Low-power indication
- Built-in removable rechargeable battery
- Long Transmission Distance: Up to 80m outdoors and 50m indoors (can be extended with a signal amplifier).
- New waterproof and dustproof function (IP54 rated).
- Advanced power saving technology for extended standby time, retaining date and time when powered off.
- Multi-functional: Includes perpetual calendar, alarm reminder, wireless remote call, and multiple working modes.

Figure 2: Long Transmission Distance Capability

Figure 3: Three Prompt Modes (Light, Vibration, Buzzer)

Figure 4: Life Waterproof, Oilproof and Dustproof Design

Figure 5: Diverse Applications and Call Instructions
3. Technical Specifications
| Attribute | Value |
|---|---|
| Model Number | TD106 |
| Brand Name | retekess |
| Working Voltage | DC3.7V (rechargeable Li-poly battery) |
| Wireless Frequency | 433MHz / 433.92MHz |
| Working Current (Buzzer Mode) | 57mA±10mA |
| Working Current (Vibration Mode) | 95mA±10mA |
| Standby Current | <8.5mA |
| Power-off Current | 180±5μA |
| Receiving Sensitivity | -108dBm |
| Receiving Distance | 100 meter (open area) / 30-50 meters (typical) |
| Decoding | Learning code |
| Modulation | AM |
| Working Temperature | -10℃ ~50℃ |
| Waterproof Grade | IP54 |
| Power Supply | Built-in rechargeable lithium battery (400mAh) |
| Battery Included | Yes |
| Certification | CE, FCC |
| Origin | Mainland China |
| Size | 47×45×18mm |
| Net Weight | 48g |
| Standby Time | >2 Days |

Figure 6: Comparison of TD106 with other Retekess models
4. Package Contents
The TD106 Wireless Watch Receiver package includes:
- 1 x TD106 Wireless Watch Receiver
- 1 x Micro-USB cable
- 1 x User manual
- 1 x Power Adapter (optional, US/EU/AU/UK plug types available)
5. Diagram of Controls
The TD106 watch receiver features the following controls and indicators:
- Screen Display: Shows Date & Time, Power capacity, and Week.
- Left Side Buttons: 'Up' and 'Down' for navigation.
- Right Side Buttons: 'Set / OK' for confirming selections, 'Power / Back' for power control and returning to previous menus.
- LED Indicator: Located below the screen.
- Power Input: Located on the backside for charging.
- Signal Indicator: Displays signal strength on the screen.
Video 1: Demonstration of TD106 watch receiver settings and operations.
6. Setup and Operation
The watch receiver's menu navigation uses the 'Setting key' (usually the 'Set/OK' button), 'Confirm key' (often the same as 'Set/OK'), 'Choose bit key' (for selecting digits/characters), 'Increase/Decrease number' (Up/Down buttons), 'Check up and down history call', and 'Exit setting/Cancel key' (Power/Back button).
6.1. Add Caller
- Press the 'Set/OK' button to display "add caller".
- Press 'Set/OK' again to confirm, showing "add 0001 ID".
- Use the 'Up' and 'Down' buttons to choose the number you need. The 'Choose bit key' (often 'Set/OK' or a dedicated button) is used for adjusting the number in the setting state. You can select from "0-9" and "A-Z".
- Press any key on the transmitter until you hear a "di" sound and "done" words appear on the screen. The number will then advance to the next one. For example, if you choose "0001" and press the call key, upon successful saving, the receiver will make "di" sounds and show "done". The screen will then display "0002". You can continue pressing the button to save the next number until all desired numbers are saved.
- When finished, press the 'Power/Back' button to exit the setting state.
6.2. Delete Caller
- Press the 'Set/OK' button to display "add caller".
- Press the 'Down' button to choose "delete caller".
- Press 'Set/OK' to confirm, showing "delete single" and "delete all".
- Use the 'Up' and 'Down' buttons to choose between "delete single" or "delete all".
- If you choose "delete single", press 'Set/OK' to confirm. The screen will show "0000". You can then select the number you wish to delete and long-press the 'Set/OK' button until the screen shows "removed". This indicates the number has been deleted.
- If you choose "delete all", long-press the 'Set/OK' button until the screen shows "removing all" and then "removed". This indicates all numbers have been deleted.
- When finished, press the 'Power/Back' button to exit the setting state.
6.3. Key Function (Area Set, Type Set)
This setting allows you to configure specific functions for keys, such as assigning them to different areas or types. Navigate to "Key function" in the settings menu and select "Area Set" or "Type Set" to configure as needed.
6.4. Work Mode (Single Key, Multi-Key)
- Press the 'Set/OK' button to display "add caller".
- Press the 'Down' button to choose "work mode".
- Press 'Set/OK' to confirm, the screen will show "single key" and "multi-key".
- Choose the desired mode using the 'Up'/'Down' buttons and press 'Set/OK' to confirm.
- When finished, press the 'Power/Back' button to exit the setting state.
6.5. Display Mode (Live View, Queue View)
- Press the 'Set/OK' button to display "add caller".
- Press the 'Down' button to choose "display mode".
- Press 'Set/OK' to confirm, the screen will show "live view" and "queue view".
- Choose the desired mode using the 'Up'/'Down' buttons and press 'Set/OK' to confirm.
- "Live view" means that when calls No.1, No.2, No.3 come in turn, the screen will show 0003, 0002, 0001, with the newest call number at the top.
- "Queue view" means that when calls No.1, No.2, No.3 come in turn, the screen will show 0001, 0002, 0003, with the oldest call number at the top.
- When finished, press the 'Power/Back' button to exit the setting state.
6.6. Prompt Mode (Light, Vibration, Sound)
- Press the 'Set/OK' button to display "add caller".
- Press the 'Down' button to choose "prompt mode".
- Press 'Set/OK' to confirm, the screen will show "light vibration sound".
- Choose the desired prompt mode using the 'Up'/'Down' buttons and press 'Set/OK' to confirm.
- When finished, press the 'Power/Back' button to exit the setting state.
6.7. Prompt Timing
- Press the 'Set/OK' button to display "add caller".
- Press the 'Down' button to choose "prompt timing". This setting allows you to select a duration from 01-99 seconds.
- Choose the desired time using the 'Up'/'Down' buttons and press 'Set/OK' to confirm.
- When finished, press the 'Power/Back' button to exit the setting state.
6.8. Remove Timing
- Press the 'Set/OK' button to display "add caller".
- Press the 'Down' button to choose "remove timing".
- Press 'Set/OK' to confirm. You can choose a value from 00-99.
- 00 means cycle mode, where all numbers remain on screen until manually cleared.
- 01-99 means the call number will automatically disappear after the set number of seconds.
- Choose the desired number using the 'Up'/'Down' buttons and press 'Set/OK' to confirm.
- When finished, press the 'Power/Back' button to exit the setting state.
6.9. Cycle Timing
- Press the 'Set/OK' button to display "add caller".
- Press the 'Down' button to choose "cycle timing".
- Press 'Set/OK' to confirm. You can choose a value from 00-99. For example, if you choose 10 seconds, the numbers will cycle one at a time every 10 seconds.
- Choose the desired number using the 'Up'/'Down' buttons and press 'Set/OK' to confirm.
- When finished, press the 'Power/Back' button to exit the setting state.
6.10. Date & Time Setting
- Press the 'Set/OK' button to display "add caller".
- Press the 'Down' button to choose "date & time".
- Press 'Set/OK' to confirm. You will see the current time (hours; minutes; seconds) and date (DD/MM/YY). Use the 'Up' and 'Down' buttons to adjust the numbers, and the 'Choose bit key' (often 'Set/OK' or a dedicated button) to move between hours, minutes, seconds, day, month, and year.
- Choose the date & time you need and press the 'Power/Back' button to exit the setting state. The screen will then show the time you have just set.
6.11. Keyboard Set
This option allows for keyboard-related settings. Navigate to "keyboard set" in the settings menu to configure as needed.
6.12. Language
This option allows for language selection. Navigate to "language" in the settings menu to choose your preferred language.
7. Maintenance
To ensure the longevity and optimal performance of your TD106 Wireless Watch Receiver, please follow these maintenance guidelines:
- Charging: Use the provided Micro-USB cable and a compatible power adapter (optional) to charge the device. Ensure the adapter is installed near the equipment and is easily accessible.
- Battery Care: The device has a built-in rechargeable lithium battery. If the battery needs replacement, ensure it is done by a qualified professional to avoid the risk of explosion. Dispose of used batteries according to local regulations.
- Cleaning: Clean the device with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Waterproof Rating: The device is IP54 rated, meaning it is protected from limited dust ingress and water spray from any direction. Avoid submerging the device in water or exposing it to high-pressure water jets.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
8. Troubleshooting (FAQ)
| Problem | Analysis | Solution |
|---|---|---|
| LCD has no display / Screen glows white | Battery voltage is low; Screen cable connection issue. | Charge the battery; Check or change the screen cable. |
| Some call buttons have less transmission distance | Battery of the call button is low/empty. | Change the battery of the call buttons. |
| The watch receiver cannot be charged | Power adapter issue; Battery is broken. | Change the power adapter; Change the battery. |
| Call buttons cannot be paired | Wireless frequency is incorrect; OSC resistor is incorrect. | Change to the correct frequency and OSC resistor. |
9. User Tips
- Button Functionality: If you experience issues with call buttons being pressed but not registering, ensure they are properly paired and their batteries are not low.
- Water Resistance: While the TD106 is IP54 rated for life waterproof, it is not designed for submersion. Avoid prolonged exposure to water or high-pressure liquids to prevent damage.
- Bracelet Availability: The product typically comes with a standard bracelet. For replacement or alternative bracelets, please contact Retekess customer support or authorized resellers.
10. Safety Information
10.1. RF Energy Exposure and Product Safety Guide
Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
This radio uses electromagnetic energy in the radio frequency (RF) spectrum to provide communications between two or more users over a distance. RF energy, when used improperly, can cause biological damage.
10.2. Avoid Choking Hazard
Small Parts. Not for children under 3 years.
10.3. Protect Your Hearing
- Use the lowest volume necessary to do your job.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding headset or earpiece.
- Limit the amount of time you use headsets or earpieces at high volume.
- When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
- Use caution with earphones; excessive sound pressure from earphones and headphones can cause hearing loss.
Note: Exposure to loud noises from any source for extended periods of time may temporarily or permanently affect your hearing. The louder the radio's volume, the less time is required before your hearing could be affected. Hearing damage from loud noise is sometimes undetectable at first and can have a cumulative effect.
10.4. Avoid Burns
- Antennas: Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result.
- Batteries: When conductive material such as jewelry, keys, or chains touch exposed terminals of the batteries, it may complete an electrical circuit (short circuit the battery) and become hot, causing bodily injury such as burns. Exercise care in handling any battery, particularly when placing it inside a pocket, purse, or other container with metal objects.
- Long Transmission: When the transceiver is used for long transmissions, the radiator and chassis will become hot.
10.5. Safety Operation
- Charger: Do not use the charger outdoors or in moist environments; use only in dry locations/conditions. Do not disassemble the charger, as this may result in a risk of electrical shock or fire. Do not operate the charger if it has been broken or damaged in any way.
- Airbags: Do not place a portable radio in the area over an airbag or in the airbag deployment area. The radio may be propelled with great force and cause serious injury to occupants of the vehicle when the airbag inflates.
- Disconnecting: Pull by the plug rather than the cord when disconnecting the charger. Unplug the charger from the AC outlet before attempting any maintenance or cleaning.
11. Regulatory Compliance
11.1. FCC Requirements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
11.2. CE Requirements
Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU; the full text of the EU declaration of conformity is available at: www.retekess.com.
11.3. IC Requirements (Licence-exempt radio apparatus)
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
- l'appareil ne doit pas produire de brouillage;
- l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
12. Warranty and Support
12.1. Guarantee
This guarantee card should be kept by the user; no replacement will be provided if lost. Most new products carry a two-year manufacturer’s warranty from the date of purchase. For warranty service, you will need to provide a receipt proof of purchase from the actual seller for verification.
Exclusions from Warranty Coverage:
- Any product damaged by accident.
- Misuse or abuse of the product, or damage resulting from unauthorized alterations or repairs.
- If the serial number has been altered, defaced, or removed.
12.2. Support Contact
For assistance regarding repairs, service, or any other inquiries, please contact:
- E-mail: support@retekess.com
- Web: www.retekess.com
- Facebook: facebook.com/RetekessWirelessSystem