HSmartcam N32CH-4K-UL

Contents

HSmartcam 32CH 4K CCTV NVR User Manual

Model: N32CH-4K-UL

1. Product Introduction

The HSmartcam 32CH 4K CCTV NVR is a digital surveillance product designed for security and defense. It features an embedded LINUX operating system for stability and supports H.264/H.265 video compression for high-quality images and efficient storage. This NVR can be used standalone or as part of a larger surveillance network.

Main Features:

  • Supports H.264/H.265 Onvif IP cameras.
  • XM cloud service for easy remote monitoring (P2P technology).
  • H.264 High Profile compression algorithm for reduced stream size.
  • Supports full real-time encoding video and multi-channel synchronous decoding playback.
  • Main and Sub Stream encoding for optimized storage and network transmission.
  • Mobile monitoring support for iPhone and Android devices.
  • VGA and HDMI HD output.
  • User-friendly interface similar to Windows operating style with mouse right-click functionality.
  • Powerful network services (DHCP, PPPOE, FTP, DNS, DDNS, EMAIL, IP searches, etc.) and support for WEB, Client, SDK.
  • Compatible with IE, Chrome, Firefox, Safari browsers.
  • Unique black box technology for monitoring the entire process, reducing maintenance costs.
  • Supports 2 SATA ports for up to 2x14TB HDDs.
  • Motion detection and Email alarm.
  • Supports ONVIF 2.3 Agreement (compatible with ONVIF 2.0).
HSmartcam 32CH 4K NVR device with H.265 4K Ultra HD, 2 SATA, XMEYE, Face Detection, 32CH NVR logos.

Figure 1.1: HSmartcam 32CH 4K NVR Overview

2. Safety Instructions

This manual ensures proper and safe use of the product. Please read carefully for future reference.

Warnings: Neglecting these may cause death or serious injury.

  • Electrical safety regulations of your nation and region must be strictly followed.
  • Use only the matched power adapter from a standard company.
  • Do not connect multiple DVRs to a single power adapter to avoid overload, overheating, or fire.
  • Shut down the power before connecting or dismounting the speed dome. Do not operate with power on.
  • Shut down the power and unplug the power cable immediately if smoke, odor, or noise is detected. Contact the dealer or service center.
  • Do not attempt to disassemble or modify the device yourself. Unauthorized repair voids responsibility for problems.

Cautions: Neglecting these may cause injury or equipment damage.

  • Do not drop the device or subject it to physical strike.
  • Keep it away from high electromagnetism radiation.
  • Do not install it on vibrating surfaces or places subject to strike.
  • Keep it away from rain and moisture.
  • Avoid exposing to direct sunlight, poor ventilation, or heat sources like heaters/radiators.
  • Avoid extreme environments such as lampblack, water vapor, or dusty conditions.
  • Use a soft, dry cloth for cleaning. Use neutral cleaner for stubborn dirt, avoiding alkaline cleaners.

3. Setup and Installation

3.1. Open-package Check and Cable Connections

Upon receiving the product, inspect the packaging for any damage. Carefully open the box and remove all protective materials. Check the NVR for any visible damage. Verify the data cable, power cord, and motherboard connections are secure.

Front Panel Overview (Standard Equipment)

Front and rear view of the NVR. Front panel shows IR, Power, HDD, Alarm indicators, and control buttons. Rear panel shows A-OUT, VGA, HD-port, Network, USB, DC 12V.

Figure 3.1: Front and Rear Panels of the NVR

The front panel typically includes:

  • Power indicator light
  • Record indicator light
  • Alarm indicator light
  • ESC button
  • Menu button
  • Direction & Enter buttons

Rear Panel Overview (Enhanced Equipment)

NVR rear panel connections diagram. Shows connections for camera, router, mouse, HD TV (HDMI), Monitor (VGA), USB, Power Supply.

Figure 3.2: Rear Panel Connections

The rear panel provides various ports for connectivity:

  • Audio Input/Output (RCA)
  • Video Output (VGA, HDMI)
  • USB ports
  • Network port (RJ45 10/100M)
  • DC 12V Power Input
  • RS485 (for PTZ control)

3.2. Hard Disk Drive (HDD) Installation

For first-time use, you must install the HDD. This NVR supports two 3.5-inch SATA HDDs (up to 14TB each). Security HDDs (TOSHIBA, Seagate, Western Digital) are recommended over PC HDDs.

  1. Disassemble the screws on the NVR cover.
  2. Remove the NVR cover.
  3. Securely fix the HDD with screws.
  4. Connect the data wire to the HDD.
  5. Connect the power wire to the HDD.
  6. Replace the NVR cover and fix the screws.
Image showing the NVR package contents including a mouse, power adapter, and user manual.

Figure 3.3: Package Contents (HDD not included)

3.3. Shelf Installation

This NVR is designed for standard 1U rack mounting. Ensure the following:

  • Maintain at least 15cm (6 inches) of space around the equipment for proper air circulation.
  • Install from bottom to top if mounting multiple units.
  • Take preventive measures against power socket overload when installing multiple components.

3.4. Video Input and Output Connections

The NVR supports PAL/NTSC BNC (1.0Vp-p, 75Ω) and VGA/HDMI outputs. Ensure vidicon signals are stable and credible. Install vidicons in appropriate locations, away from backlighting and low illumination. Share a stable ground and power supply between the vidicon and NVR.

3.5. Audio Signal Input and Output

Audio ports are BNC connections. The input impedance is high, requiring an active tone arm. Audio signal lines should be firm, away from electromagnetic interference, and properly connected to avoid false connections, joint welding, or oxidation. Avoid high voltage current.

3.6. Alarm Input and Output Connections

Some products may not have alarm input/output functions. For those that do:

  • Alarm Input: Grounding alarm input. Requires grounding voltage signal. If connecting to multiple DVRs or other equipment, use a relay for isolation.
  • Alarm Output: Cannot be connected to high-power loads (max 1A). Use a contact isolator to prevent relay damage from high current.
  • PTZ Decoder Connections: Grounding of PTZ decoder and NVR must be shared. Use shielded twisted pair cables. Avoid high voltage and ensure reasonable layout. Connect 120Ω resistance in parallel at the outlying end to ensure signal quality.

3.7. Device Attachment

  1. Connect the RS485 lines of the speed dome to the NVR's RS485 interface.
  2. Connect the video line to the NVR video input.
  3. Power on the speed dome.

4. Operation

4.1. Basic Operation

Turn On

Plug in the power supply and turn on the power switch. The power indicator light will illuminate, and the NVR will beep upon startup. The default video output is multi-window mode. If within the video setting time, timing video recording will start automatically. The video indicator light for corresponding channels will shine, indicating normal operation.

Note: Ensure input voltage matches the NVR's power supply switch (220V±10% / 50Hz recommended). Use a UPS for power protection.

Turn Off

There are two methods:

  • Soft Switch: Enter the [Main Menu] and select [Turn Off] from the [Turn Off the System] option.
  • Hard Switch: Press the power supply switch.

If the NVR shuts down abnormally, it can automatically back up video and resume previous working status.

System Login

When the NVR boots up, a login screen will appear. The default usernames are 'admin' (super user) and 'default' (preview and video playback permissions). Neither has a default password. For security, change the 'admin' password immediately after first login.

Remote access via smartphone/computer. Shows QR codes for Android/iOS, XMeye app login, device list, and remote view steps.

Figure 4.1: Remote Access Login via XMeye App

If the password is entered incorrectly five times consecutively, an alarm will trigger, and the account will be locked. It will unlock automatically after a reboot or 30 minutes.

Preview

Right-click the mouse to switch between windows. The system date, time, and channel name are displayed. Surveillance video and alarm status are shown in each window.

Desktop Shortcut Menu

In preview mode, right-click the mouse to access a shortcut menu with options like: Main Menu, Record Mode, Playback, PTZ Control, High Speed PTZ, Alarm Output, Color Setting, Output Adjust, Logout, View Mode Shift, Spot.

Digital Channel Configuration Wizard

This wizard helps configure digital channels. It allows enabling cloud services, setting up fast digital channels, and managing IP cameras. Be cautious as using this feature updates all digital channel parameters.

Video 4.1: NVR Menu Navigation and Settings Demonstration

4.2. Record Configuration

Set recording parameters for surveillance channels. The system defaults to 24-hour continuous recording. Access [Main Menu] > [Recording Function] > [Recording Setup].

  • Channel: Choose the channel(s) for recording.
  • Redundancy: Enable double backup to two hard disks (requires two HDDs).
  • Length: Set video file length (default 60 minutes).
  • Pre-Record: Record 1-30 seconds before an event.
  • Record Mode: Set to schedule, manual, or stop.

4.3. Playback

Video files can be played back from the hard disk via the desktop shortcut menu or [Main Menu] > [Record] > [Playback]. The hard disk storing video files must be set to read-write or read-only.

  • Accurate Playback: Input time (h/m/s) and click play.
  • Local Zoom: In single-window full-screen mode, drag the mouse to select a section for local zoom.

4.4. Alarm Functions

The NVR supports various alarm functions including motion detection, video blind, video loss, alarm input/output, and intelligent analysis.

Motion Detect

When the system detects motion exceeding set sensitivity, the motion detect alarm activates, triggering linked functions. Digital channels enable motion detection on both local and connected remote devices. Hybrid mode only requires local motion detection.

Video Blind

Activates when video image quality is poor (e.g., bad brightness) or reaches set sensitivity. Similar to motion detection, it can be enabled for local and remote devices in digital channels, and only locally in hybrid mode.

Video Loss

Activates when the NVR cannot obtain a video signal from a channel. Similar to motion detection, it can be enabled for local and remote devices in digital channels, and only locally in hybrid mode.

Alarm Input

Activates when an external alarm signal is received. In hybrid mode, only local alarm sensor connection is needed. The alarm information will link to related setting functions.

4.5. System Setup

Configure various system parameters including general settings, network settings, and output mode.

General Settings

Set system date, time, language (supports 20+ languages including English, Spanish, Russian, etc.), and hard disk full operation. You can also set the NVR's machine name.

Table showing various languages supported by the NVR.

Figure 4.2: Supported Languages

Network Setup

Configure network parameters such as IP address, subnet mask, gateway, DNS, media port, HTTP port, and transfer policy. Supports wired and wireless network cards.

Net Service

Configure advanced network functions like PPPOE, NTP, Email, IP Filter, DDNS, FTP, ARSP, Alarm Server, UPNP, and WIFI.

Output Mode

Configure video output parameters for front output (channel title, time display, record/alarm status, transparency, region cover) and encode output (channel title, time display, record/alarm status, transparency, region cover).

Serial Port Settings

Set serial port function, baud rate, data bits, stop bits, and parity. Used for debugging, program updates, or specific control.

Tour

Set patrol display mode (single-view, four-view, six-view) and interval time. Alarm tour can shift to six-view after an alarm.

Channel Management

Manage digital channels, including status and mode. This function is supported only by HVR and 6000 series products.

4.6. Advanced Settings

This menu includes HDD management, account management, online user, output adjustment, auto maintenance, restore, upgrade, device information, and import/export.

HDD Management

View HDD information (number, type, status, capacity) and configure read-write, read-only, or redundant disk modes. You can also format disks.

Account Management

Manage user accounts and groups. Usernames are limited to 8 bytes. 'Admin' is the super user. User permissions can be set.

Online User

View connected network users and disconnect them if needed. Disconnected users are frozen until device reboot.

Auto Maintain

Set the NVR to automatically reboot and delete old files at specified times.

Restore

Restore system settings to default. You can select specific items to restore.

Upgrade

Upgrade firmware via USB. Select the upgrade file from the USB interface.

Device Information

View device interface information such as audio/alarm channels, GUI theme, remote control type, and playback settings.

Import / Export

Export log information and configuration files to a USB flash drive. Import configuration files from a USB flash drive.

4.7. Information

View hard disk information, code stream statistics, log information, and version details.

HDD Info

Displays hard disk status (normal, broken-down, no disk), type, capacity, and recording time. A '*' next to the serial number indicates the current working disk.

BPS (Bits Per Second)

Displays code stream (Kb/S) and hard disk capability (MB/H) in real-time as a wave sketch map.

LOG

Search log information based on set search mode. Logs include system operation, configuration, data management, alarm events, recording, user management, and file management. Logs can be cleared.

Version

Displays basic information such as hardware, software version, issue date, serial number, and NAT status.

4.8. Cloud Technology Basic Operation

The NVR supports cloud technology for remote monitoring via WAN using its serial number.

Check Cloud Connection Status

Connect the device to WAN, then go to [Main Menu] > [Info] > [Version] to check if it's connected to the cloud server.

Log in Cloud Server

Visit xmeye.net to log in. You can log in by user (requires registration) or by device (using serial number and verify code).

Device Management

Add devices by entering their serial number to monitor them. The icon Offline icon indicates the device is offline.

5. Maintenance

  • Regularly clean printed circuit boards, connectors, fans, and the machine box.
  • Ensure proper grounding to prevent video/audio signal interference and protect the NVR from static or inductive electricity.
  • Do not pull out video signal lines or RS-232/RS-485 ports while the power is on.
  • Do not use a TV in the local video output port (VOUT) of the NVR, as it can damage the video output circuit.
  • Always use the soft turn-off function in the menu or press the turn-off button on the panel (3 seconds or longer) to protect the hard disk.
  • Keep the NVR away from heat sources.
  • Ensure the NVR is well-ventilated for better heat dissipation.
  • Regularly check and maintain the system.

6. Troubleshooting (FAQ)

If you encounter problems not listed here, contact your local service provider or the HQ service.

6.1. The NVR cannot boot up normally.

  • Power supply is incorrect or damaged.
  • Power supply line is not connected properly.
  • Program updating is wrong.
  • Hard disk is damaged or its lines are broken.
  • Front panel or main board is damaged.

6.2. The NVR reboots automatically or stops working after a few minutes.

  • Input voltage is unstable or too low.
  • Hard disk is damaged or its lines are broken.
  • Power of the switch power supply is low.
  • Frontal video signal is not stable.
  • Bad heat radiator, too much dust, or bad running circumstances.
  • Hardware of the NVR is damaged.

6.3. System cannot detect hard disk.

  • Hard disk power supply line is not connected.
  • Cables of the hard disk are damaged.
  • Hard disk is damaged.
  • SATA port of main board is damaged.

6.4. No video outputs in single/multiple channels.

  • Program is not matched (update program).
  • Image brightness is 0 (restore default setup).
  • No video input signal or signal is too weak.
  • Channel protection or screen protection is set.
  • Hardware of the NVR is damaged.

6.5. Real-time image problems (color/brightness distortion).

  • Incorrect N/PAL mode setting for BNC output.
  • NVR not matched to monitor impedance.
  • Video transmission distance too far or line loss too large.
  • Color and brightness settings are wrong.

6.6. Cannot find video files in local playback mode.

  • Data line of the hard disk is damaged.
  • Hard disk is damaged.
  • Different program updated with original program files.
  • Video files to look up are covered.
  • Recording is not on.

6.7. Local video is not clear.

  • Image quality is too bad.
  • Reading program is wrong (reboot NVR).
  • Data line of the hard disk is damaged.
  • Hard disk is damaged.
  • Hardware of the NVR is damaged.

6.8. No audio signal in surveillance window.

  • Not an active tone arm or active sound box.
  • Audio lines are damaged.
  • Hardware of the NVR is damaged.

6.9. Audio signal in surveillance but no audio signal in playback.

  • Audio option not chosen.
  • Corresponding channel not connected with video.

6.10. The time is wrong.

  • Setting is wrong.
  • Battery is in bad connection or voltage is too low.
  • Oscillation is damaged.

6.11. The NVR cannot control the PTZ.

  • Something wrong with frontal PTZ.
  • PTZ decoder setting, connection, or installation is incorrect.
  • Connections are not correct.
  • PTZ setting of the NVR is not correct.
  • Protocols of PTZ decoder and NVR are not matched.
  • Address of PTZ decoder and NVR are not matched.
  • When multiple decoders are connected, the far port of the PTZ decoder line A(B) must connect a 120Ω resistance.
  • Distance is too far.

6.12. Motion detect is not working.

  • Time range set is not correct.
  • Motion detect area set is not correct.
  • Sensitivity is too low.
  • Limited by hardware edition.

6.13. Cannot log in via web or CMS.

  • System is Windows 98/ME (update to 2000sp4 or higher, or install software for low edition).
  • ActiveX is held back.
  • Version not exceeded dx8.1 (update display card driver).
  • Network connection failure or settings issues.
  • Invalid password or username.
  • CMS not matched to NVR program version.

6.14. Image is not clear or no image in network preview/video file playback.

  • Network is not stable.
  • User machine is resource limited.
  • Choose play-in-team mode in NVR network setup.
  • Region shelter or channel protection is set.
  • User has no surveillance purview.
  • Real-time image of hard disk recording machine itself is not clear.

6.15. Network connection is not stable.

  • Network is not stable.
  • IP address or MAC address is conflicted.
  • Net card of the NVR is bad.

6.16. Something wrong with USB backup or writing a CD.

  • Rewritable machine and hard disk share same data lines.
  • Data is too much (stop recording and backup).
  • Data exceeds backup storage.
  • Backup equipment is not compatible or damaged.

6.17. Keyboard cannot control the NVR.

  • Serial port of NVR not set correctly.
  • Address is not correct.
  • Multiple transformers connected, power supply not large enough (give each transformer individual power supply).
  • Distance is too far.

6.18. Alarm cannot be reset.

  • Alarm setting is not correct.
  • Alarm output is turned on manually.
  • Input machine is damaged or connections are not correct.
  • Problems for specific program edition (update program).

6.19. Alarm is not working.

  • Alarm setting or connection is not correct.
  • Alarm input signal is not correct.
  • Alarm connected with two loops synchronously.

6.20. Remote controller is not working.

  • Remote control address is not correct.
  • Remote control distance too far or angle too large.
  • Battery is used up.
  • Remote controller or front panel of recording machine is damaged.

6.21. Storage time is not enough.

  • Front vidicon quality is bad, lens dirty, or backlighting installation.
  • Hard disk capability is not enough or damaged.

6.22. Downloading files cannot play.

  • No media player, DX8.1 software, or DivX503Bundle.exe file.
  • DivX503Bundle.exe and ffdshow-2004 1012.exe files not installed in Windows XP.

6.23. Cannot remember advanced password or network code.

Contact local service or HQ service for assistance.

6.24. Cannot see preview picture of digital channel.

  • Device not added, related channel not enabled/selected.
  • Selected device not connected to video sources.
  • Channel title of selected remote device not exist.
  • Stream for remote channel set by extra stream.
  • Username & password not matched.
  • Directly input IP address or port No. incorrectly.
  • Resolution of added device too large for monitor.

6.25. 'Search' does not find any device.

  • No other device exists in the Local Area Network.
  • Subnet mask setting incorrect on Network settings.

6.26. Snapshot at alarm function enabled, but no picture caught.

  • HDD manage without partition for snapshot.
  • Partition for snapshot is 0.
  • Snapshot function not enabled on record -> storage of related channel.

6.27. Time shows on digital channel not same as local side.

Enable time synchronous function of digital channel.

6.28. Cannot see preview picture of analog channel.

  • Camera not connected to video interface or source.
  • Video source is broken.

6.29. Picture will be frozen when multi-connection and shift devices.

Digital channel picture needs a few seconds to buffer when shifting devices.

7. Specifications

Front and rear view of the NVR. Front panel shows IR, Power, HDD, Alarm indicators, and control buttons. Rear panel shows A-OUT, VGA, HD-port, Network, USB, DC 12V.

Figure 7.1: NVR Front and Rear Panels

AttributeValue
Brand NameHSmartcam
Model NumberN32CH-4K-UL
Compression FormatH.265, H.264
Video Input InterfaceRJ45 (32CH 8MP IPC CAMERA)
Video Output1VGA + 1HDMI-Compatible (Support 4K Display)
Video Resolution5 MP
Audio Input1 RCA
Audio Output1CH RCA
Audio Compression FormatG711A
Hard Drive Interface TypeSATA (2 Port, Max 14TB each)
Hard Drive Size3.5''
Network InterfaceRJ45 10/100M
ONVIFYes (ONVIF 2.4)
P2PBy Cloud or APP XMEye
Mobile Phone ViewingYes via XMEYE APP
Supported Mobile SystemsiPhone OS, Android
Supported Operating SystemsMicrosoft Windows (98, ME, 2000, XP, Vista, 7), macOS
Power Supply12V with US/EU/AU/UK Plug Available
Alarm ActionLocal Alarm
Backup TypeUSB Flash Divers
Support LanguageMulti language (English, Spanish, Russian etc.)
DimensionsL390mm*W235mm*H45mm
WeightAround 2KG

8. User Tips

  • For optimal performance and storage, always use security-grade HDDs (e.g., Toshiba, Seagate, Western Digital) rather than standard PC hard drives.
  • When setting up remote access, ensure your network configuration (DHCP, DNS, etc.) is correct and stable for reliable P2P cloud service.
  • Regularly check the NVR's logs for any abnormal events or errors to proactively address potential issues.
  • If experiencing video playback issues, verify the hard disk status and ensure it is set to read-write mode.
  • For PTZ control, ensure the PTZ decoder and NVR share a common ground and that the correct protocols are configured.

9. Warranty and Support

For any technical support or warranty inquiries, please contact the HSmartcam Official Store directly. Refer to the product label for the product type and serial number when contacting support.

A detailed user manual in PDF format is available for download: View User Manual (PDF)

© HSmartcam Official Store. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.