Dooya DV24AF/L

Contents

Dooya DV24AF/L Tubular Motor Instruction Manual

Model: DV24AF/L

1. Safety Notes

Please read and understand all safety instructions before installation, operation, or maintenance of the Dooya DV24AF/L tubular motor. Failure to follow these instructions may result in severe injury or damage to the product.

  • This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.
  • Cleaning and user maintenance shall not be made by children without supervision.
  • If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
  • The drive shall be disconnected from its power source during cleaning, maintenance, and when replacing parts.
  • The A-weighted emission sound pressure level of the drive is equal to or less than 70 dB(A).
  • The mass and the dimension of the driven part shall be compatible with the rated torque and rated operating time.
  • Note the type of driven part the drive is intended for.
  • Do not allow children to play with fixed controls. Keep remote controls away from children.
  • Frequently examine the installation for imbalance and signs of wear or damage to cables and springs. Do not use if repair or adjustment is necessary.
  • Watch the moving shutter and keep people away until the shutter is completely closed.
  • Before installing the drive, remove any unnecessary cords and disable any equipment not needed for powered operation.

2. Product Overview

The Dooya DV24AF/L is a 12V DC tubular motor designed for various types of blinds, including aluminum venetian blinds, Roman blinds, and honeycomb canopy blinds. It features RF433 remote control capability and a silent operation.

Video: Overview of the Dooya DV24AF/L tubular motor and its components.

Dooya DV24AF/L tubular motor, remote control, and power adapter

Image: The Dooya DV24AF/L tubular motor, accompanying remote control, and power adapter.

3. Specifications

FeatureSpecification
Model NumberDV24AF/L
TypeTubular Motor
Rated Torque0.8 N.m
Motor Speed34 RPM
Rated Current0.9 A
Rated Power10 W
Rated VoltageDC 12V
Emission Frequency433 MHz
Protect FeatureIP40
Wireless FunctionalityYes
Includes BatteryNo
High-concerned chemicalNone
OriginMainland China
CertificationCE
MaterialABS, Copper
Max LoadingApprox. 3kg

4. Setup & Installation

4.1 Motor Installation

The motor is designed to be integrated into various blind systems. Ensure you have the correct mounting hardware (e.g., wall brackets, U-shape plates, rope winders, U-shape grooves) compatible with your specific blinds.

Diagram showing motor installation with wall bracket, U-shape plate, rope winder, and venetian blinds

Image: Diagram illustrating the typical installation of the tubular motor within a blind system, showing components like the wall bracket, U-shape plate, rope winder, and venetian blinds.

4.2 Limit Position Setting

This procedure sets the upper and lower travel limits for your blinds.

  1. Enter Limit Setting Mode: Press the P2 button (on the motor) for 2 seconds. The motor will run briefly (hint x1).
  2. Set Up Limit Position:
    • Use the remote's Up/Down buttons to move the curtain upward to your desired top-most position.
    • Press the Up button once, then the Stop button once, then the Stop button again. The motor will run briefly (hint x1) to confirm the up limit.
  3. Set Down Limit Position:
    • Use the remote's Up/Down buttons to move the curtain downward to your desired bottom-most position.
    • Press the Down button once, then the Stop button once, then the Stop button again. The motor will run briefly (hint x1) to confirm the down limit.

Note: The motor will run until it reaches the set stop and automatically confirms the limit position. If the motor is powered off and then back on, it will exit the limit setting mode. If the limit setting is not completed, the mode will be exited. If limits were previously set, they will be used or deleted before setting new ones.

4.3 Add Emitter (Remote Control)

To pair a new remote control (emitter) to the motor:

Method One (Using P2 button on motor):

  1. Press the P2 button (on the motor) for 2 seconds. The motor will run briefly (hint x1).
  2. Press the P1 button (on an already matched emitter) for 2 seconds. The motor will run briefly (hint x1).
  3. Press the P1 button (on the new emitter you want to add) for 1 second. The motor will run briefly (hint x1) to confirm pairing.

Method Two (Using an existing emitter):

  1. Press the Up + Down buttons (on an already matched emitter) for 1 second. The motor will run briefly (hint x1).
  2. Press the P1 button (on the new emitter you want to add) for 1 second. The motor will run briefly (hint x1) to confirm pairing.

Note: After successfully adding an emitter, all original motor settings (limits, speed, etc.) are retained.

5. Operation

5.1 Remote Control Button Specification

  • P1 Button: Motor setting button.
  • Up Button: Moves blinds upward.
  • Stop Button: Stops blinds movement.
  • Down Button: Moves blinds downward.
  • R Button: Setting button (often used in combination).

5.2 Motor P1 Button Operations

  • Setting Up (Initial Pairing): Press P2 button (on motor) for 2 seconds, then P1 button (on remote) for 1 second.
  • Switch Direction: Press P2 button (on motor) for 2 seconds, then P1 button (on remote) for 3 seconds. This reverses the motor's direction.
  • Reset to Factory Mode: Press P2 button (on motor) for 12 seconds. This will delete all previous system function settings and emitter codes.

5.3 Fine-tuning Up/Down Limit Position

After initial limit setting, you can fine-tune the positions:

  1. Press the Up + Down + Stop buttons (on remote) simultaneously for 5 seconds. The motor will run briefly (hint x1) to enter fine-tuning mode.
  2. Adjust the up/down limit position: Short press the Up/Down button for jog-move. Long press for more than 2 seconds for continuous movement. Release the button to stop.
  3. Press the Stop button (on remote) for 3 seconds to save the fine-tuned limit. The motor will run briefly (hint x3).

Note: Entering fine-tuning mode will delete any previously set preferred stop position. If adjustment is unsuccessful, the original limits are retained.

5.4 Jog-move Dimming Function

This function allows for precise, incremental adjustments.

  1. Power off the motor, then power it back on.
  2. Press P2, then Up, then Down buttons (on remote) in sequence. The motor will run briefly (hint x1) to open the jog-move dimming function.

Note: Repeat this operation to cancel the jog-move function. In jog-move mode, a short press (up to 2 seconds) of the Up/Down button will result in jog-move. A long press (more than 2 seconds) will result in continuous movement.

5.5 Speed Regulation

Adjust the motor's running speed.

  • Improve Speed: Press the Up + Stop buttons (on remote) simultaneously for 2 seconds. The motor will run briefly (hint x2). Repeat to increase to the third gear.
  • Reduce Speed: Press the Down + Stop buttons (on remote) simultaneously for 2 seconds. The motor will run briefly (hint x2). Repeat to decrease to the second gear.

Note: If the motor does not run for a hint, it means the running speed has already reached its maximum or minimum value.

5.6 Preferred Stop Position

After setting the up and down limits, you can set a preferred intermediate stop position (e.g., half-open).

  1. Move the curtain to your desired preferred stop position.
  2. Press P2, then Stop, then Stop buttons (on remote) in sequence. The motor will run briefly (hint x1) to confirm the preferred stop position.

Note: Repeat this operation to delete the preferred stop position. In continuous moving mode, a long press of the Stop button will move the curtain directly from its current position to the preferred stop position. In jog-move mode, a long press of the Stop button will first move the motor to the down limit position, then to the preferred stop position.

5.7 Cancel Limit

To remove all set limits:

  1. Press P2, then Down, then P2 buttons (on remote) in sequence for 5 seconds. The motor will run briefly (hint x1) to confirm cancellation.

Note: Canceling limits will also delete any preferred stop position.

5.8 Delete Emitter (Remote Control)

To remove paired remote controls from the motor's memory:

Delete One Emitter:

  1. Press P2 button (on motor) for 2 seconds. The motor will run briefly (hint x1).
  2. Press P1 button (on the specific emitter you wish to delete) for 1 second. The motor will run briefly (hint x1) to confirm deletion.

Delete All Emitters:

  1. Press P2, then Stop, then P2 buttons (on remote) in sequence for 3 seconds. The motor will run briefly (hint x1) to confirm deletion of all emitters.

6. Troubleshooting

Refer to the table below for common issues and their solutions.

PhenomenonReasonProcessing Method
The motor is not runninga. The emitter (remote) is not matched.
b. If P1 button is pressed for a long time with no reaction, the power may be short-circuited, or the circuit board/motor is broken.
a. Perform the 'Add Emitter' procedure.
b. Contact technical support or a qualified engineer for after-sales service.

7. User Tips

  • Limit Adjustment Patience: Setting the motor's limit positions can sometimes require a few attempts. Be patient and follow the steps carefully; the system is designed to work perfectly once configured.
  • Component Compatibility: Ensure that you have all necessary mounting brackets, drive adapters, idlers, and motor tubes that are compatible with your specific type of blinds (venetian, roman, honeycomb) for proper installation.

8. Warranty & Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

An additional user manual in PDF format is available for detailed reference: Dooya DV24AF/L User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.